Coil-Over Kit CCE5060
Coil Over Thrust Bearings CCE1001 Fits between the lower spring seat and the bottom of the spring. Provides a roller bearing surface for easy adjustment of ride height. Sold in pairs. Coil Over Spring Wrench CCE1000 Makes spring adjustment a snap and should be in every racer’s toolbox. Adjustable Lower Shock Mounts
Installing coil-overs is one of the most effective ways to reduce unsprung weight in the suspension, while also adding the benefits of damp- ing and ride height adjust- ability. Kit is sold complete
with Strange Engineering coil-overs with springs, adjustable lower shock mount, upper shock crossmember, coil-over adjuster wrench and coil-over thrust bearings. Specify spring rate when ordering. Economy Coil Spring And Shock Mounts Coil spring mounts
Mounts are extremely strong and take up very little room on the rear axle hous- ing. Up to 6" of ride height adjustment is possible by removing only two bolts per side. Kit includes two housing brackets (except CCE3721), four gold zinc plated “L” brackets, 1/2" bolts and nuts, align- ment bushings, and instructions. Part No. Description CCE3714
provide the appearance and many of the same benefits of true coil overs, at a fraction of the cost. Mounts accept standard 12" x 2-1/2" ID coil over springs and an original
equipment type shock can be mounted inside the spring. Ride height is adjustable up to 6", with 5" of suspension travel. Ideal for sportsman racers as well street rods and pro streeters. Complete with upper mounts, adjustable lower mounts, shocks, springs, hardware, and instructions. Specify spring rate when ordering. Part No. Description CCE5076 Rear Coil-Over Spring Kit With Springs CCE5076K Rear Coil-Over Spring Kit Without Springs Coil-Over Springs An assortment of rear 2-1/2" ID coil-over springs are offered. Refer to the chart at the bottom of the column to select the proper spring. Springs are sold individually. Part No. Description CCE3982-95 12" Tall Rear Spring, 95 Lbs. Rate CCE3982-110 12" Tall Rear Spring, 110 Lbs. Rate CCE3982-130 12" Tall Rear Spring, 130 Lbs. Rate CCE3982-150 12" Tall Rear Spring, 150 Lbs. Rate CCE3982-170 12" Tall Rear Spring, 170 Lbs. Rate CCE3982-200 12" Tall Rear Spring, 200 Lbs. Rate Rear Shocks Koni And Aldan Eagle (12" x 2.5" I.D.) Spring Rate Total Wt. On Front Wheels Spring Rate Total Wt. On Rear Wheels 200 600-800 Lbs. 65 Under 800 Lbs. 250 800-1000 Lbs. 80 800-1000 Lbs. 275 1000-1100 Lbs. 95 1000-1100 Lbs. 300 1100-1200 Lbs. 110 1100-1200 Lbs. 350 1200-1500 Lbs. 130 1200-1300 Lbs. 400 1500-1800 Lbs. 150 1500-1700 Lbs. 450 1800-2000 Lbs. 170 1700-2300 Lbs. 500 2000-2300 Lbs. 200 2300-2600 Lbs. 550 2300-2500 Lbs. 250 2600-2900 Lbs. 650 2600 Lbs. And Up 300 2900-3200 Lbs. Recommended Spring Rates Front Shocks Koni, Aldan Eagle And Strange Struts (7" x 2.5" I.D.)
Lower Rear Shock Mounts
CCE3720 CCE3721
Lower Rear Shock Mounts, Notched For Rectangular Back Brace Lower Rear Shock Mounts, Without Housing Brackets
Universal Lower Shock Mount Kit CCE3717
Universal 3/16" mild steel mounts have a 3" radius and fit all popular rear end housings. Kit includes 1/2" bolt and nut, and alignment bushings. Kit mounts two shocks. Upper Shock Crossmember CCE3716
Weld crossmember style mount installs between the top of the frame rails to increase chassis rigidity and provide a secure upper mount for the shocks. Includes 1-3/8" x .095" x 40" crossmember, weld-on shock mount tabs, 1/2" bolts and nuts, and misalignment bushings. Shock Mounting Jig CCE3716-3 Handy tool eases installation and assures proper operation of rear coil-over shocks. Installs in place of shock to hold mounting brackets at the correct ride height during installation. Rear Subframe Installation Video CCE9001 Geared to the do-it-yourself enthusiast who
wants the “Pro Street” look or wants big 14" x 32" slicks under a race car. Illustrates necessary tools and step-by-step procedures involved to correctly install a rear subframe and/or suspension, right in the home garage.
188
Made with FlippingBook flipbook maker