CHASSIS
Weld-On Shock Brackets Weld-on shock brackets mount standard and coil-over shocks with 1/2" I.D. inner bushing or 1/2" rod end to chassis as well as many other uses. 1/8" thick mild steel brackets include 1/2" bolt, Bracket is notched for 1-1/2" - 1-3/4" round tubing to create a gusset style mount that welds on three sides. Notched design positions the bracket perpendicular to the tubing at a 90 degree angle for straight mount and approximately a 75 degree angle for angled mounts. spacer and locknut. Notched Tube Mount
1/2" Rod End Mount ALL60073 3/16" thick steel mount with 1/2" holes accepts rod ends up to 5/8" wide. Mount is 1-5/8" tall overall.
Quick Release T-Handle Pins Positive lock quick release pins hold tightly in place until the handle button is depressed allow- ing the pin to be inserted
ALL60314
or removed into or out of a hole with ease. Handles are made from 380 die cast aluminum, shanks are made from 4130 steel. Each pin is equipped with a stainless steel split ring allowing the option to attach a cable assembly. Part No. Description Part No.
Straight Mount
Lengths stated are from base of T-handle to top of detent ball.
ALL60104
ALL60112
Description
ALL60300 1/4" x 1" ALL60301 1/4" x 1-1/2" ALL60302 1/4" x 2" ALL60304 5/16" x 1" ALL60306 5/16" x 2" ALL60308 5/16" x 3" ALL60310 3/8" x 1" ALL60312 3/8" x 2"
ALL60314 ALL60318 ALL60320 ALL60322 ALL60326 ALL60328 ALL60330
3/8" x 3" 1/2" x 2"
ALL60103
1/2" x 2-1/2"
ALL60113
Part No. ALL60103 ALL60104 ALL60112 ALL60113
Description Short Single Long Single
1/2" x 3"
ALL60324 1/2" x 3-1/2" NEW!
5/8" x 2"
Long Two Position
5/8" x 2-1/2"
Extra Long Three Position
5/8" x 3"
Angle Mount
Quick Pin Lock Collars Steel lock collar provides a positive lock for quick release pins. Black coated collar with button head machine screw allows attach- ment of a securing device, like an Allstar lanyard (ALL18461 or ALL18463). Part No. Description ALL60335 1/2" Collar With 10-32 Screw ALL60336 5/8" Collar With 1/4"-28 Screw Upper Control Arm Brackets ALL60025 Stamped, 3/16" thick mild steel brackets weld to chassis to provide a mounting point for upper control arm. Brackets are sold in pairs and have two 5/8" mounting holes, spaced 7/8" apart for adjustment. May be trimmed to desired height. Upper Control Arm Bracket ALL60190 Bracket is flame cut from 1/2" thick steel, with a 6" bolt spacing. Welds to frame and accepts upper A-arm. Chassis Tie Down Brackets ALL60075
ALL60335
ALL60101
ALL60100
Part No. ALL60100 ALL60101
Description
Left Hand Single Right Hand Single
Round Tube Mount Bracket welds parallel onto tubing. Typically mounted above or below tubing and includes 1/2" shock mounting hardware. Mount- ing positions are on 1" centers. Part No.
ALL60107
ALL60114
Description
ALL60107 ALL60114 ALL60115
Single
Two Position NEW!
Three Position
Flat Mount Bracket mounts to a flat surface or square tubing. Part No. Description ALL60106 Single Related Parts Part No. Description ALL99100 Replacement bolt, locknut, and bushing ALL99101 Replacement bushing only Universal Upper Coil-Over Shock Mount Kit ALL60230 Weld-in kit provides a mounting point for rear coil-over shock mounts in tube, boxed or stock frames with up to 48” between frame rails. Great for drag racing or street applications, kit includes a 48” long, .120” wall x 1-1/2” mild steel tube, reinforced mounting tabs, 2” x 3” plates and 1/2” hardware.
ALL60115
ALL60106
Steel brackets weld to chassis and provide a secure mounting location to hook a tie down strap or winch cable. Set of two brackets.
18
Made with FlippingBook flipbook maker