Rear Coil-Over Shock Absorber Kit COE2051 Improve weight transfer and traction. Kit includes a pair of 3-way adjustable shocks, both upper and adjustable lower mounts. Components are also available separately (coil springs not included). Part No. Description Replacement Components COE2046 Upper Coil-Over Shock Mount COE2047 Lower Coil-Over Shock Mount, Pair COE2755 Shock Absorber, Each COE3414 Coil-Over Axle Housing Bracket COE3417 RH Lower Coil-Over Shock Mounting Bracket COE3419 LH Lower Coil-Over Shock Mounting Bracket Slide-A-Link The bolt-on Slide-A- Link is a revolutionary new traction device that is far superior to traditional trac- tion bars. Adjust pinion angle and pre-load for improved 60 ft. and 1/4 mile ETs. Includes replacement lower axle mount pads, 1/2" U-bolts, replacement aluminum front spring eye bushings, hardware and instructions. Part No. Description COE2090 1982-00 Chevy S-10 COE2096 1970-81 Camaro/Firebird COE2100 1967-69 Camaro/Firebird, 1968-79 Chevy II And Nova Two Degree Wedge Plates COE7025 Allows adjustment of pinion or traction bar angle on cars or trucks fitted with leaf springs. Durable aluminum plates feature integral ribs to allow stacking. Sold in pairs. Professional Wheel-E-Bars ™ COE2016 infinite adjustability. Overall length of 44" accommodates a 20" axle width. Includes hardware, instructions and natural rubber wheels with aluminum hub and ball bearing center. Part No. Description Wheel-E-Bar Replacement Parts COE7047 Bracket Converts Bolt-On Wheel-E-Bars To Weld-On COE7048 Axle Mounting Bracket COE7051 Wheel-E-Bar Replacement Spring, Fits COE2016, 2038, 2039 And 2040 (Each) COE7052 Wheel-E-Bar Replacement Spring Adjusting Mechanism, Fits COE2016, 2038, 2039, 2040, 2043 And 2145, (Each) Wheel-E-Bar Replacement Synthetic Rubber Wheel, Ball Bearing Center, 3/8” Hole COE7066 Lower Aluminum Strut, Fits COE2015, 2016, 2044 And 2045 (Each) Parachute Mount COE2100 Weld-on Wheel-E-Bars™ feature 7075-T6 aluminum spring adjust- ers. 6061-T6 lower struts offer COE7058 Wheel-E-Bar Replacement Rubber Wheel, Fits COE2016, 2038, 2039 And 2040 (Each) COE7060
Aluminum And Steel Fenderwells Fenderwells will accommodate gigantic tires and are perfect for drag race and pro street cars. Formed with three reinforcing ribs and Pittsburgh seams for easy assembly, fenderwells are available in
five diameters and widths of 23-1/4" and 27-1/4". Choose from 24-gauge steel or lightweight .032" aluminum fenderwell kits.
Steel Part No. COE3002 COE3006 COE3008 COE3010 —
Aluminum Part No. COE3004 COE3005 COE3007 COE3009 COE3011
Description
43" L. x 21-1/2" H. x 27-1/4" W. 46" L. x 23" H. x 27-1/4" W. 36" L. x 18" H. x 23-1/4" W. 38" L. x 19" H. x 23-1/4" W. 40" L. x 20" H. x 23-1/4" W.
Fabricated Ford 9" Rear Axle Housings
Housings have 1/8" thick, one-piece outer shells, 1/4" thick face plates and accept 9" center sections. Mild steel or chrome moly housings are available with cut-to-length, 3" diameter axle tubes and have a 60-3/4" overall width. Drain plug, filler plug and breather bung are included. Housing ends and carrier studs must be purchased separately. Part No. Description COE9100 Fabricated Ford 9" Rear Axle Housing, Chrome Moly COE9200 Fabricated Ford 9" Rear Axle Housing, Mild Steel Related Components COE3406 Housing Vent, 1/8" NPT COE9006 Ford 9" Carrier Stud Kit, Ten Studs, Nuts And Washers COE9105 Fabricated Ford 9" Rear Axle Housing Brace, Chrome Moly COE9205 Fabricated Ford 9" Rear Axle Housing Brace, Mild Steel COE9505 Big Ford 9" Housing Ends, 3.150" OD Bearing, Pair Ford 9" Axle Housing Brace COE3405 Perfectly contoured brace is made from 1/8" thick steel and welds directly to the backside of a Ford 9" rear housing. Brace adds rigidity to the housing to keep it from bowing and flexing under hard acceleration. Dana 60/Chrysler 8-3/4" Axle Bearing Conversion Kit COE8008
Convert tapered roller axle bearings to ball bearings and eliminate the stock load adjuster for a significant improvement in durability. Sold individually, with retainer and gasket. Fuel Tank Sump Kit
The majority of original equipment fuel tanks have the pick up located at the front of the tank. G-forces slosh the fuel to the rear of the tank and away from the pick-up, causing fuel starvation. CE’s kit eliminates the problem by relocating the sump to the rear of the tank.
Mount fits many chassis and includes the anchor and pack mounts. Welding and fabrication required. Part No.
COE4040
COE4041
Description
Part No. COE4040 COE4041
Description
COE3450 COE3451 COE3452
Parachute Anchor Mount, Attaches To Chassis Parachute Pack Mount, Mounts To Anchor Mount Parachute Release Cable Kit, Includes 18' Cable, Mounting Bracket, Release Handle And Hardware
Sump, Two 3/8" NPT Bungs Sump, Two 1/2" NPT Bungs
216
Made with FlippingBook flipbook maker