Performance Camshafts For Ford Supercharged 4.6/5.4L Level 2 camshafts offer increased horsepower and an extended RPM range. Camshafts work well with stock or near- stock engines and drivetrains, and offer superior low end and mid-range power. Ideal when accompanied by small diameter tube headers, low restriction dual exhaust, aftermarket manifold, performance ignition and 9.5:1+ compression ratio. Power Adv. Duration Intake Exhaust Part No. Application Type Range Duration @ .050" Lift Lift CRO62802-2 Ford 4.6/5.4L 2V, 1999-Up Hyd. 1500-6500 276°/276° 234°/234° .581" .581" CRO62822-4 Ford 4.6/5.4L 4V, 1993-Up Hyd. Idle-5900 264°/264° 222°/222° .475" .475" CRO62824-4 Ford 4.6/5.4L 4V, 1993-Up Hyd. Idle-7750+ 270°/270° 236°/244° .484” .484”
Full Body Roller Lifters Bearings and outer races are crowned to
Hydraulic And Solid Lifters Quality hydraulic and solid lifters are available for Chevy V8. All lifters have a precisely ground and finished crown face for quick camshaft/lifter break-in and a long life. Sold in sets of 16. Application Hydraulic Solid Chevy V8 CRO66000-16 CRO66900-16 “Coolface” Solid Lifters CRO66900X980-16 Chevy V8, .842" dia. lifters have a .024" oil metering port machined into the face of the lifter to improve durability with no significant oil pressure loss. Ideal for high RPM engines with high rocker arm ratios and valve spring pressures. Sold in set of 16. Note: Block restrictors are not recommended with “Coolface” solid lifters. heat treated and fitted with oversized needle bearings, sure-lock rocker nuts and ball race steel tip rollers. Lightweight, narrow body rock- ers provide plenty of clearance when used with large diameter valve springs or high lift camshafts. Sold in sets of 16. Part No. Description Ratio Stud CRO73601-16 SB Chevy 265-400 1.5 7/16" CRO73641-16 SB Chevy 265-400 1.6 7/16" CRO73605-16 BB Chevy 396-454 1.7 7/16" Jumbo Split Lock 10° Valve Stem Keepers chrome moly steel, heat treated for maximum strength, and offered in standard, .050" higher or .050" lower installed heights. Keepers fit 11/32" valve stems, sold in sets of 16 pair. Part No. Description CRO86110-16 Standard Installed Height CRO86110X1-16 +.050" Installed Height CRO86110X2-16 -.050" Installed Height Billet Performance 7° Valve Stem Keepers Stainless Steel Rollerized Rocker Arms Rocker Arms are made of 17-4PH stainless steel, Keepers provide twice the strength of con- ventional 7° tapers. Machined from premium
eliminate lobe tracking. “HIPPO” (Hi-Pressure Pin Oiler) lifters have a .024" orifice to direct oil to the needle bearings, improving durability. Not avail- able in offset designs. Sets of 16. Part No. Description CRO66200-16 SB Chevy 262-400, .842" Dia. CRO66200H-16 SB Chevy 262-400, .842", “HIPPO” CRO66201-16 BB Chevy 396-454, .842" Dia. CRO66201H-16 BB Chevy 396-454, .842" Dia., “HIPPO” Severe Duty Roller Lifters Ideal for high RPM and high cylinder pressure, lightweight lifters have billet alloy bodies, and heavy duty blades which are raised for use with late model blocks. “HIPPO” (Hi-Pressure Pin Oiler) lifters have a .024" orifice to direct oil to the needle bearings, improving durability. Choose standard or offset designs. Sets of 16.
Standard Part No.
“HIPPO" Part No.
Description
SB Chevy 262-400, .842" Dia. SB Chevy 262-400, .842" Dia., Offset Int. SB Chevy 262-400, .874" Dia., Offset Int. SB Chevy 262-400, .903" Dia., Offset Int. BB Chevy 396-454, .842" Dia., Endura Max BB Chevy 396-454, .842" Dia., Offset Int. BB Chevy 396-454, .903" Dia., Offset Int. SB Ford 221-351W BB Chevy 396-454, .842" Dia. BB Chevy 396-454, .903" Dia.
CRO66290-16 CRO66292-16
CRO66290H-16 CRO66292H-16
CRO66292X874-16 CRO66292X874H-16
—
CRO66292X903H-16*
CRO66291-16
CRO66291H-16
—
CRO66291X842E-16 †
CRO66293-16
CRO66293H-16
CRO66291X903-16* CRO66293X903-16*
CRO66291X903H-16* CRO66293X903H-16*
CRO66215-16 CRO66217-16
CRO66215H-16
BB Ford 429-460 CRO66217H-16 * Severe Duty/Oversized Bearing lifters. Lifters have a .812" bearing O.D. rather than standard .750". † Endrua max lifters have needleless roller bushing for greater load handling ability.
Hi-Seat Offset Roller Lifters Roller Lifters incorporate a .180" offset, integral rev-kit button and Crower’s “Hi-Seat” pushrod design, which allows for shorter push- rods, reducing flex for improved valve control. “HIPPO” (Hi-Pressure Pin Oiler) lifters have a .024" orifice to direct oil to the needle bearings, improving durability. Sold in sets of 16. Part No. Description CRO66275-16 SB Chevy 265-400, .842" CRO66275H-16 SB Chevy 265-400, .842", “HIPPO”
Machined from chrome moly and heat treated for maximum strength. Keepers fit 11/32" valve stems. Sold in sets of 16 pair. Part No. Description CRO86107X1-16 +.050" Installed Height CRO86107X2-16 -.050" Installed Height
229
Made with FlippingBook flipbook maker