COOLING
1955-57 Chevy Aluminum Radiator ALL30006 A direct replacement radiator for all
Upper Mount Kit For Plastic Tank Radiators ALL30152 Channel rests on top of the core and two flat aluminum straps may be bolted or welded to the channel. Hook the steel springs into provided hole
1955-57 Chevy passenger cars with a V8 engine using a short style water pump. Radiator has mounting brackets that position it behind the core support bar, two rows of 1" tubes, furnace brazed tanks, a machined billet filler neck with overflow fitting, drain petcock, 1/2"NPT bung for ad- ditional temperature sender/switch
and connect to a lower chassis location. Kit includes channel (1.5" x 21.5"), two straps (1" x 11.5") and two 17" springs. Replacement Parts Part No.
Description
and mounting clips. The built-in automatic transmission cooler has 1/4"NPT fittings. 23"H x 24-1/2"W. Core width is 22". Universal Radiator Mount Kits Kits mount universal style radiators to
ALL30122 ALL30153
Spring
Channel
Radiator Tie Down Rods Aluminum tie down rods are often used with an upper radiator support to keep radiator in place. Rods have 3/8"-24 RH and LH threads. Often used with a rod end on one or both ends. Part No. Description ALL54115 20" ALL54116 24" ALL54117 30" Universal Mounting Kit ALL30085 Mounting kits are commonly used to mount electric fans, oil coolers, transmission cool- ers or honeycomb screen directly to a radiator. Kits include four 8" nylon mounting bolts with washers, rubber spacer blocks and retain- ing nuts. Bolts are pressed through the fins of the radiator to mount accessory. Blower Fan ALL30002 Compact, plastic blower moves up to 300 CFM of air. The quiet electric blower has three speeds and can be adjusted to move cooling air wherever it’s needed, up to 30 ft. away. Weighs just 8 lbs. with two built-in recepta- cles and a 12' long power cord. Optional heater accessory (sold separately) attaches to front of blower and plugs into one of the receptacles to
factory radiator core supports. Aluminum side supports fasten around tanks to cradle radiator and brackets can be drilled for a variety
of mounting options. Side supports require notching to clear GM and Ford lower outlet fitting. Kits are available for radiators with tapered bottom tanks or square bottom tanks. Part No. Description ALL30155 Kit For Allstar aluminum tank, Most Griffin And Other Radiators With Tapered Bottom Tanks ALL30156 Kit For Allstar plastic tank, AFCO, Howe, Northern And Other Radiators With Square Bottom Tanks Upper Radiator Support Bracket ALL30120
Universal upper support bracket is pre- formed to fit over the top of most radiator cores (up to 2-1/2" thick) to keep radiator secured in saddle style lower mounts. Steel bracket is .085" thick and has a 3/16" hole for riveting or bolting in place. Upper Mount Kit For Aluminum Tank Radiators ALL30121 Channel rests on top of the core and two flat aluminum straps may be bolted or
transform blower into a heater. Blower Fan Heater Accessory Part No.
Description ALL30003 5300 BTU, 115V AC 1400 Watts, Heater With Blower Unit Draws 11.7 Amps, Use With ALL30002 Only, Weight 3 Lbs.
welded to the channel. Hook the steel springs into provided hole and connect to a lower chas-
Overflow Tank ALL36112 One quart capacity aluminum tank is mandated by most sanctioning bodies to prevent coolant from spilling on the racing surface. Tank includes (1) 3/8” NPT bung on side and (1) 1/2” NPT bung on bottom with fitting and petcock.
sis location. Kit includes channel (2" x 21.5"), two straps (1" x 11.5") and two 17" springs. Fit Allstar aluminum tank radiators. Replacement Parts Part No. Description ALL30122 Spring ALL30123 Channel
23
Made with FlippingBook flipbook maker