Command Center DEDCC3 The Command Center com- bines the functions of a delay box, RPM-activated switch and two separate 4-stage timers into a single unit. Unit also features four different delay modes including “cross talk”, “crossover”, “interface” and
Cross-Over Delay Box DEDCO2 The CO-2 has the same
features as the RTD-7, but allows the racer to leave off opponent’s
light instead of waiting for his light when running against a car with a slower ET. The CO-2 is compatible with 12 and 16 volt systems. Shift Timer DEDST1 Single stage timer activates CO 2 or elec- tric shifters by time instead of RPM for more consistency. Compact, easily mounted timer is adjustable from 0-9.99 and may be activated with release of the trans-brake or line lock. RPM Switch DEDRPM2
“run delay”. “Starting line control” provides an adjustable release time to increase throttle prior to launch, while “super start” al- lows activating a starting line controller prior to staging. A lighted keypad with raised numbers and lighted LED display help provide easy operation. Compact unit is just 9.12" long x 3.75" tall x 2.13" deep for easy mounting. Sold with complete instructions. Thunder Delay Box DEDT1
New, billet encased de- lay box features a 250% larger display for easier viewing, day or night. Compact, 6-7/8" wide x 4" tall x 1-1/2" thick unit includes a lighted
keypad and display with scroll and cursor keys for quick, easy setting. Select from four different delay modes including cross- talk, crossover, interface and delay. Box additionally has skip up/ skip down, remote dial-in board output, independent line lock output, adjustable transbrake lockout, crossover compensation, trip protection, and pro/full tree features. NHRA/IHRA approved for all “box” classes.
Unit uses electronic ignition to sense RPM for activation of shift lights, shifters and other devices. Built-in delay prevents unwanted shifts due to tire spin or converter flash. Push button thumbwheels select shift points in 100 RPM increments to 9,900. Remote Display DEDRD1 Equally suited
Lightning Delay Boxes Made of billet aluminum, multi-function delay boxes have modes for crossover, interface, delay and crosstalk.
to dragsters or doorslammers, Remote Display displays dial-in in super bright, 4" tall LED read out, putting an end to
Starting line control with adjustable time release, “super start” automatic starting line control, two four-stage timers, lighted keypad, adjustable transbrake lockout, scroll-up or -down, remote display dial-in board output, lateness timer and cross-over compensation are among the many other features. NHRA approved units are compatible with 12 or 16 volt systems and virtually any ignition. Lightning Plus unit includes all of the features of the standard Lightning but, is slightly larger with a 250% larger display. Part No. Description DEDL1 Lightning Delay Box, 3" x 6" Dashboard Cutout DEDL2 Lightning Plus Delay Box, 3" x 7-1/2" Dashboard Cutout Reaction Time Delay Box DEDRTD7 The RTD-7 Reaction
incorrect dial-ins. Lightweight, clear anodized aluminum housed unit uses a “no glare” lens, while the built-in sun sensor adjusts brightness and automatically dims the display at night. Requires a signal from Command Center (CC3), Bracket Master (BM2) or
Manual Control (MC1) to display dial-in. Multiple Relay Center DEDMRC1 Multiple Relay Center features individually fused relays with LED's for both inputs and
Time Delay works with all ignition systems includ- ing magnetos, is 12 and 16 volt compatible and requires no batteries. Four push-button thumbwheels allow selection of any
outputs, easing trouble- shooting. Unit simplifies the wiring of relays for nitrous systems, fuel
pumps, water pumps, fans, etc. Four relays are ganged together to power up to four stages of nitrous, while a separate relay is isolated.
delay up to 9.999 seconds. A full 12 volts are supplied to the trans brake, with no voltage drop through the delay box. The 30 Amp capability will easily handle any trans-brake manufactured.
242
Made with FlippingBook flipbook maker