Drag Racing Parts & Accessories

Two-Stage Throttle Stop Controller DEDTSC2A Controller allows launch at

3-Speed Reverse Pattern CO2 Shifter Makes 1-2 and 2-3 shifts automatically at any

preset RPM. Bolts to the rear of reverse pattern Turbo Action Cheetah SCS Shifter and is compatible with GM, Chrysler or Ford auto- matic transmissions. Part No.

full throttle for lowest reaction time, set to reduce power for

any amount of time at mid- track, and then resume wide- open throttle for the top end charge. Activated by releasing trans-brake. Use the TSC2A to activate electric shifters and other devices. Timer one can be set anywhere from 0-9.99 seconds in .01 second increments. Linkage Stop/Starting-Line Controller Air-actuated throttle stop

Description

DEDAS1K DEDAS1

Complete 3-Speed Shifter Kit With RPM Switch And CO2 Bottle

Air Shifter Only

CO2 Accessories Part No.

works with all popular injection and carburetor setups. Includes needle valve adjuster, stainless steel solenoid valve, air cylinder and cylinder rod, high tem- perature seals in the solenoid valve and cylinder, large diameter numbered stop bolt, and quick connect air fitting. Part No.

Description

CO2 Bottle Kit, 10 Oz., Includes Adj. Press. Reg. And Air Line Kit CO2 Bottle, 10 Oz., And Valve CO2 Bottle, 2-1/2 Lb., And Valve Adjustable Pressure Regulator Only

DEDAB10K DEDAB10V DEDAB25V

DEDABR

DEDAB10K

Bottle Mounting Clamps, 1-3/4", Pair

DEDAB10C-3/4

DEDAB10C-5/8 Bottle Mounting Clamps, 1-5/8", Pair DEDAB25K CO2 Bottle Kit, 2.5 Lb., Includes Adj. Press. Reg. And Air Line Kit DEDABL Air Line Tubing, 10' Of 1/4" Tubing CO2 Shut-Off Valve, Mounts Between Bottle Valve And Regulator Safety Disc, DEDABVSM 3,000 PSI Burst, For CO2 Bottle Valve And 10 Oz. Or 2-1/2 Lb. Bottles NEW! DEDALT Air Line Tee, 3-Way 1/4" OD Quick Disconnect DEDGHP High Pressure CO2 Gauge, Replacement For DEDABR Regulator DEDABSOV

Description

DEDTS10 DEDTS10K

Complete Kit Minus Air Bottle

Complete Kit Including DEDAB10K Bottle Kit

Trans Brake Switches And Stretch Cords The fastest, most consis-

tent switches on the market feature adjustable mount and terminals on bottom to con- nect any wire. Button height is adjustable with a custom lock nut. Part No.

Quad Ring Seal, Installs Between Regulator And Bottle Valve

DEDAB10C-3/4

DEDQRABR

Description

Electric Water Pumps Pumps weigh only 4 lbs., are 4-1/4" deep, and draw only 3-1/2 Amps - half the draw of conven- tional pump drives. The high-speed centrifugal impeller flows 20 gallons per minute. Tested up to 250°F and

DEDPBSRTD DEDPBSXL

Standard Trans Brake Switch

Extra-Large Button Trans Brake Switch

DEDSC2 DEDSC3

Two Wire Cord Three Wire Cord

B&M Pro Bandit 2-Speed Solenoid Shifter DEDSS4 Engineered specifically to fit the B&M Pro Bandit 2-speed shifter, providing consistent, hands-free shifting. Sold with black anodized mounting bracket and hardware. RPM switch (DEDRPM2) not included. Universal 2-Speed

B&M Shifter Not Included.

30 PSI. Includes a special, three- in-one water inlet which accepts 1-1/4" or 1-3/4" hose, or 1" NPT fitting. Pumps are easily rebuildable, and all internal parts are interchangeable between big and small block Chevy pumps. Part No. Description DEDWP1 SB Chevy Water Pump DEDWP2 BB Chevy Water Pump DEDWH1 SB Chevy Water Header, Use With DEDWP3 DEDWH2 BB Chevy Water Header, Use With DEDWP3 DEDWP3 Remote Water Pump Replacement Component DEDSKWP Water Pump Rebuild Kit For WP1/WP2/WP3 DEDWP1

Solenoid Shifter DEDSS2RPM Universal, lightweight bracket and solenoid assembly mounts directly behind shift lever and may be installed at any angle. Includes RPM switch. May be used with a wide variety of shifters.

243

Made with FlippingBook flipbook maker