Series 7000 Transmission Coolers Coolers combine silver brazed, copper
Tornado Electric Fans Exclusive “Swept Wing”
tubing with aluminum fins for greater heat dissipation. Fea- tures include a 360° tube to fin bond, patented Turbolator in
design is more efficient than conventional, straight-blade fans and reduces amperage draw. Outer rings reduce oper- ating vibration and the metal rod mounting systems provide easy, reliable installation. Tornado Fans can function as pullers or pushers by turn- ing the blade over and reversing motor polarity. A Tornado Fan reduces drag while robbing less horsepower. Dimensions Part No. Size CFM Amp Draw A B C D DER16617 7” 400 4.8 7.25” 7.12” 2.37” 1.37” DER16618 8” 500 4.8 8.25” 8.00” 2.37” 1.37” DER16619 9” 570 5.4 9.67” 9.50” 2.50” 1.25” DER16620 10” 650 5.3 11.25” 10.67” 2.50” 1.50” DER16622 12” 880 8.8 12.50” 11.50” 2.50” 1.50” DER16624 14” 1350 10.5 14.50” 14.00” 3.25” 1.75” DER16626 16” 2175 18.4 16.75” 15.75” 4.25” 1.75”
each passage for increased cooling, protective edge guards and satin black powder coat finish. Transmission coolers work equally well in a drag car or a tow vehicle. Display Box Display Board Application GVW Rating Size Hose End DER13101 DER13201 Subcompact 12,000 lbs. 5" W x 12" L x 3/4" D Push-On DER13102 DER13202 Compact 14,000 lbs. 5" W x 17" L x 3/4" D Push-On DER13106 DER13206 Intermediate 15,500 lbs. 7-1/2" W x 12" L x 3/4" D Push-On DER13103 DER13203 Intermediate 18,500 lbs. 7-1/2" W x 17" L x 3/4" D Push-On DER13104 DER13204 Full-Size 20,500 lbs. 10" W x 17" L x 3/4" D Push-On DER13105 DER13205 Truck 22,500 lbs. 12-1/2" W x 17" L x 3/4" D Push-On
Heat Sink Transmission Coolers Lightweight and compact, Heat Sink Trans- mission Coolers are extremely effective in reducing fluid temperatures. Compact, 3” diameter coolers may be easily
installed to frame rails, floor pans, etc. Single pass coolers include 3/8” NPT ports, while double pass units have 1/4” NPT ports. Sold complete with integrated mounting brackets and barbed fittings. Part No.
H.O. Extreme Electric Fans Designed as a primary cooling fan, the H.O. Extreme combines a low profile design with balanced, curved blades and a powerful, high torque motor to deliver maximum cooling. Puller design (radiator side) fans are offered in a variety of sizes.
Description
DER13249 DER13257 DER13261 DER13267
Single Pass Oil Cooler, 10-1/4” L. x 2-3/16” W. x 3-1/4” D. Single Pass Oil Cooler, 26-1/4” L. x 2-3/16” W. x 3-1/4” D. Double Pass Oil Cooler, 17-1/4” L. x 2-3/16” W. x 3-1/4” D. Double Pass Oil Cooler, 26-1/4” L. x 2-3/16” W. x 3-1/4” D.
Amp Draw A
Part No. DER16105 DER16110 DER16112 DER16114 DER16116 DER18217
Size CFM
B
C
D
5" 315 3.6 5-5/8" 6-1/4" 1-1/4" 2-1/4" 10" 802 9.2 10.56" 11.12" 1.12" 2.06" 12" 1328 14.2 12.56" 13.18" 1.12" 2.43" 14" 1864 21.5 14.43" 15.15" 1.12" 3.43" 16" 2024 21.0 15.68" 16.25" 1.12" 3.43"
Series 1000 Stacked Plate Ram Air Coolers Highly efficient Stacked Plated Ram Air Coolers incorporate a scoop style shroud that captures and redirects air flow for maximum cooling efficiency. Coolers utilize high flow turbulators, furnace brazed construction, integrated mounting points and a black powder coated finish. Part No. Description Inlet Size Dimensions DER51078 10 Row Cooler -10AN/7/8"-14 Female 13" x 3-5/8" x 2" DER51678 16 Row Cooler -10AN/7/8"-14 Female 13" x 5-5/8" x 2" DER51978 19 Row Cooler -10AN/7/8"-14 Female 13" x 6-1/2" x 2" DER52578 25 Row Cooler -10AN/7/8"-14 Female 13" x 7-3/8" x 2" DER54078 40 Row Cooler -10AN/7/8"-14 Female 13" x 12-3/4" x 2" Fluid Control Thermostats DER51078
17" 2400 23.5 16-7/8" 16-7/8"
— 2-5/8"
PWM Electric Fan Controller DER16795 Advanced controller constantly monitors engine temperature, automatically actuating the fan as necessary to control temperature, increasing cooling efficiency and reducing amperage. Soft Start Technology ramps the fan(s) up slowly, eliminating harmful spikes in amperage. The PWM offers multi-fan control with a built-in A/C override circuit and a 65 amp capacity. Fan Controllers
Thermostat assemblies offer the ultimate in control, helping to maintain consistent trans- mission fluid temperatures. While in controlled closed circuit
Adjustable controllers can be set to activate at 150°-240°F; single stage controllers turn on at 180°F. All controllers automatically shut off at 10°F less than setting. A 30/40 amp relay is included. Part No.
when fluid temperatures are under 180°, 90% of the oil bypasses the cooler and the remaining 10% flows through the cooler, prevent-
Description DER16730 Single Stage (180°F), Probe Threads Into Water Jacket, 1/8" & 3/8" NPT DER16731 Single Stage (190°F), Probe Threads Into Water Jacket, 1/8" & 3/8" NPT DER16738 Single Stage (180°F), Probe Inserts Into Radiator Fin DER16739 Single Stage (180°F), Probe Threads Into Water Jacket, 3/8" NPT DER16749 Adjustable (150°-240°F), Probe Threads Into Water Jacket, 3/8" NPT DER16759 Adjustable (150°-240°F), Probe Inserts Into Radiator Fin DER16779 Hi-Amp Single Fan Controller, Probe Threads Into Water Jacket, 3/8" NPT DER16789 Hi-Amp Dual Fan Controller, Probe Threads Into Water Jacket, 3/8" NPT
ing air pockets. When temperatures exceed 180°, the thermostat valve closes, allowing 100% flow through the cooler to control fluid temperatures. Part No. Description DER13011 Fluid Control Thermostat, 3/8” NPT, With Fittings DER25011 Fluid Control Thermostat, 3/8” NPT DER25719 Fluid Control Thermostat, 1/2” NPT
245
Made with FlippingBook flipbook maker