COOLING
Curved Blade Electric Fans Electric fans require very little amper- age and are suitable for use in race car or tow vehicle. Fans are set up as “puller” units, mounted behind the radia- tor. By flipping blades, reversing wires, and mounting in front of radiator, fans will operate in “pusher” configuration. Each unit includes a mounting kit. Part No. Description ALL30070 10", 775 CFM ALL30072 12", 925 CFM ALL30085 Replacement Mounting Kit ALL30074 14", 1530 CFM ALL30076 16", 1980 CFM Economy 16" Curved Blade Electric Fan ALL30077 An economical option to Allstar’s standard S-blade fan, this 10-blade electric fan has many of the same features. Universal design fan may be set up as a puller or pusher style to mount in front or behind the radiator. Mounting brackets and a hardware kit are included. Fan flows 2024 CFM with 21.0 amp draw and housing dimensions of: 16" x 16-1/4" x 4". Aluminum SB Chevy “Short Style” Water Pump ALL31100 Popular “short style” water pump that was originally used on pre-1969 small block Chevrolets. Pumps are built using all new components and an aluminum body for added weight savings over original cast iron pumps. Pump features a 3/4" main shaft bearings with a 5/8" pilot, a billet steel hub drilled for both small and
Aluminum SB Chevy “Corvette Style” Water Pumps
This aluminum version of “Corvette style” water pump was originally used
on 1971-82 small block Chevrolet Corvettes but is now used through- out the motorsports industry. Pump is built using all new components and an aluminum body for added weight savings over original cast iron pumps. Pump features a 3/4" main shaft and bearings with a 3/4" pilot and a billet steel hub that has a set screw retainer for use on higher RPM applications. Block mount to fan hub dimension is 5-13/16". Part No. Description ALL31105 Water Pump ALL31106 Water Pump With 3/8"NPT Bypass Ports And Cam Stop Hardware Note: Water pumps may need to be clearanced for use with 8" dampers.
ALL31105 ALL31106
Water Pump Spacer Kits Kits provide additional clearance needed for belt or gear drive timing systems. Gaskets are included. Part No. Description ALL31070 1/8" ALL31071 1/4" ALL31072 3/8" ALL31073 1/2" ALL87230 Replacement Gaskets Pulley Shim Kits
ALL31072
ALL31064
Use shim kits to properly align pulleys. Water pump shims have dual bolt hole pattern to fit most GM and Ford water pumps. Crank pulley spacers are for small block Chevys. Part No. Description ALL31064 Water Pump, 1/16", 1/16", 1/8" (3 Shims) ALL31066 Crankshaft, 1/16", 5/64", 1/8" (3 Shims) V-Belts Premium quality V-belts are perfect replacements for worn or cracked belts. Part No. Description ALL86120 31.5" ALL86121 34" ALL86122 39" ALL86123 41" ALL86124 42" ALL86125 44" ALL31066
large fan bolt patterns making this a good choice for street and mild performance vehicles. Block mount to fan hub dimension is 5-5/8". This pump is not recommended for use with mechanical fans over 5,000 RPM. Above this RPM, use the ALL31105 pump with a 3/4" shaft/bearing. Note: Water pump may need to be clearanced for use with 8" dampers.
GREG SEHER
MATT HAUCH
26
Made with FlippingBook flipbook maker