Victor Series Manifolds (Cont.)
Small Block Chrysler Part No.
EDE2915
Ford 5.0L Coyote Victor II Manifold Part No.
Description
Description
Super Victor (3500-8000) Standard Flange, Single Plane Manifold Fits Small Block Chrysler “LA” Engines. Ideal For Use With Edelbrock Performer RPM Cylinder Heads. Accepts Early Style Water Neck Only.
Victor II 5.0L (1500-7500) Cast Aluminum EFI Manifold Combines Long, Tapered Runners And A Large Plenum. Includes Provisions For OEM Emissions Equipment And Fuel Rails. Features Nitrous Bosses For Adding Direct Port System. Fits All 2011-15 Mustang Stock Hoods And Strut Tower Braces.
EDE2815
EDE7180
Victor 340 (3500-8000) Designed For 340-360 Engines Using Standard Rectangular Port Cylinder Heads. Can Be Used On 318 Engines Equipped With 340-360 Heads.
EDE2915
EDE2886
Big Block Ford 390-428 "FE" Part No.
Big Block Chrysler Part No.
Description
Description
Victor FE (4000-8000) Square Bore, Single Plane Manifold Has Plenty Of Material For Port Matching To Low- Or Medium-Riser Style Heads. Will Not Fit 427 High Riser Or Tunnel-Port Heads.
Victor 383 (3500-7500) Standard Flange Manifold For Competition “B” Series Wedge Engines Including 361, 383 and 400. Extra Tall, Single Plane Manifold Uses A Large Runner Design. Victor 440 (3500-7500) All New Runner Design For Competition 413-440 Engines. Fitted With Nitrous Bosses And Dual Bolt Pattern Carb Flange. Will Not Fit 1962-64 Max Wedge Heads.
EDE2936
EDE2886
EDE2954
Big Block Ford 490-460 Part No.
EDE2921
Description
Small Block Ford Victor Jr. Manifolds Part No.
EDE2965 Victor 460 (3500-8000) Fit Ford 429-460 Competition Engines Using Cobra-Jet Cast Iron, SVO Cobra-Jet Aluminum Or Stock Cast Iron Cylinder Heads. Standard Heads Require Port Matching Of Head To Fit Manifold. Dominator 4500 Flange Equipped. EDE2966 Victor 460 (3500-8000) Same As EDE2965 Except Carburetor Flange Is Designed For Standard Holley 850 CFM Carburetor.
Description
Victor Jr. 302 (3500-8000) Developed For Ford 289-302 Engines, Engineered To Work With OEM Cast Iron Or Aftermarket Windsor Style Heads. No Rear Water Crossover. Port Size Is 1.90" x 1.08" With Enough Material To Open Up To 2.10" x 1.25" Victor Jr. 351W (3500-7500) Single Plane Designed For Use On Ford 351 Windsor Competition Engines Using SVO Block. Fits All 1969-Up 351W Cylinder Heads And Edelbrock EDE6025, EDE7716, Or EDE7721 Victor Jr. 351W (3500-7500) Same As EDE2980 But Designed For Standard Engine Blocks
EDE2921
EDE2980
EDE2981
Oldsmobile Part No.
Description
Victor 455 Olds Manifold (4500-7500) Standard Flange. Fits All 400-455 Big Block Olds Engines. Single Plane, Air Gap Design Manifold Offers Significant Horsepower Increases Over Existing Designs.
EDE2924
EDE2810
Super Victor Manifolds Part No.
Description
Glidden Victor 351W (5000-9000) Larger Version Of The Super Victor 351W. For Large Displacement, High RPM Windsor Engines With 9.5" Deck Height. 4500 Series Carb Pad. .250" Taller Than EDE2924, With Larger Runners And Plenum. Super Victor 351W (4500-8500) Designed For High Displacement, High RPM Engines With Standard 9.500" Deck Height. Recommended For Use With Ported 351W Factory Cast Iron Heads, Edelbrock EDE7721 Or EDE7716. Super Victor 8.2 (4500-9000) Engineered For High RPM, Competition 289-302 Engines With An 8.2" Deck Height And Aftermarket Windsor Type Cylinder Heads. Includes Nitrous And Rear Water Cooling Bosses. Super Victor 9.2 (4500-8500) Designed For Large Displacement, Competition 351 Windsors. Manifold, Which Is For Blocks With A 9.2" Deck Height, Has Provisions For Nitrous And Rear Cooling.
EDE2828
EDE2956
Pontiac Part No.
EDE2924
Description
EDE2956 Victor Pontiac (3500-7500) For 389-455 Competition Engines Equipped With Either Factory Pontiac Or Edelbrock Performer RPM Cylinder Heads. Carburetor Flange Is For Dominator 4500 Holley. EDE2957 Victor Pontiac (3500-7500) Same As EDE2956 Except Designed For Holley 850 CFM Standard Flange Carburetors.
EDE2928
EDE2929
270
Made with FlippingBook flipbook maker