COOLING
Remote Mount Electric Water Pump ALL31120
Water Pump AN Block Adapters Adapters mount in place of standard mechanical water pumps when using inline or remote electric water pumps. Ford pump adapters require water pump back plates for complete installation. Part No. Description ALL31150 SB Chevy -12AN ALL31151 BB Chevy -12AN ALL31152 SB Ford -12AN ALL31153 SB Ford Water Pump Back Plate (Early) ALL31154 SB Ford Water Pump Back Plate (Late) Y-Block Adapter ALL31159 Billet aluminum Y-Block is commonly used
Compact design water pump will flow up to 25 GPM which is perfect for intercoolers, dragsters or com- pact engines. Pump can be used on 12-16 volt sys- tems and only draws 8 amps. Electric motor is sealed to help prevent damage or corrosion and 6061-T6 billet aluminum housing is black hard coat anodized with threaded mounting holes for easy mounting. Ac- cepts -12 O-ring style fittings, complete unit weighs only 5 lbs. Inline Electric Water Pump ALL31130 used on 12-16 volt systems and only draws 6 amps. Electric motor is sealed to help prevent damage or corrosion and 6061- T6 billet aluminum housing is black hard coat anodized with threaded mounting holes for easy mounting. Use with Allstar ALL31135-31140 adapter fittings. Complete unit weighs 6 lbs. Wire harness with 20 amp inline fuse included. Part No. Description ALL31135 1-1/4" Hose Fitting ALL31136 1-1/2" Hose Fitting ALL31137 1-3/4" Hose Fitting ALL31138 -12AN Fitting ALL31139 -16AN Fitting ALL31140 -20AN Fitting ALL31135 ALL31138 Inline water pump will flow up to 50 GPM which is suitable for many applications throughout the motorsports industry. Pumps are designed to provide better cooling and space savings over most mechanical pumps. Pump can be
when connecting inline or remote electric water pumps to AN block adapters. 1-1/4"-12 inlet port accepts Allstar ALL31135-31140 O-ring style fittings for direct hose or AN style connections. Outlet ports accept standard -12 O-ring (ORB) style fittings to con- nect to block adapters. Part No. Description ALL31135 1-1/4" Hose Fitting ALL31136 1-1/2" Hose Fitting ALL31137 1-3/4" Hose Fitting ALL31138 -12AN Fitting ALL31139 -16AN Fitting ALL31140 -20AN Fitting ALL31135 ALL31138
ELECTRICAL, GAUGES & IGNITION
Heat Shrink Tubing ALL76160 Place tubing over wiring before attaching terminal end then slide over crimped terminal end, heat to seal and strengthen connection. 30-piece kit includes a variety of sizes including 1/16", 1/8", 3/16", 1/4", 3/8" and 1/2". Grommet Set ALL18360 Grommets are perfect for protecting wiring and hoses that pass through panels up to 1/16" (.062") thick. Kit includes 36 grommets (6 of each size: 1/4", 5/16", 3/8", 1/2", 5/8" and 11/16"). Grommets are also available in size specific 10-packs. Part No. Grommet Hole I.D.
Spiral Wire Loom Loom keeps wiring bundled together for a neat appearance and can be easily removed when adding or removing wires during
wiring harness changes. Open design makes identifying or locating a wire simple and will not hold dirt and moisture like solid looms. Loom also provides provide abrasion resistance to protect wiring or hoses. High density polyethylene material is rated from -30 F to 165 F and sold in 10 ft. lengths. Part No. Description ALL76600 1/4" ALL76602 1/2" ALL76604 3/4" Braided Wire Wrap Split loom braided wrap is easily applied over existing hoses or wiring to conceal and protect against wear or abrasion. Wrap features a 25% overlap based on the nominal size listed, al- lowing the wrap to bend and flex without opening. Wrap is constructed of polyethylene material, heat resistant up to 250° F. and easily cuts with a hot knife or a soldering iron with knife attachment. Part No. Description ALL76610 1/8” x 20’ ALL76612 1/4” x 15’ ALL76614 1/2” x 10’ ALL76616 3/4” x 5’ ALL76618 1” x 10’
Panel Hole I.D.
ALL18362 ALL18363 ALL18364 ALL18365 ALL18366 ALL18367 ALL18368
3/16"
5/16"
1/4"
3/8"
5/16"
7/16"
3/8" 1/2" 5/8"
1/2" 5/8" 7/8"
11/16"
1"
27
Made with FlippingBook flipbook maker