High Flow Rate Fuel Injector Kits Kits contain eight high flow rate fuel injectors engi- neered for race use. Injectors work best with air meters that have been recalibrated. For use with Hi-Flow mass air sensors only. Part No. Flow Rate Connector FRDM9593-LU24A 24 Lbs./Hr. USCAR FRDM9593-LU60 60 Lbs./Hr. USCAR FRDM9593-LU80 80 Lbs./Hr. USCAR Fuel Injector Adapter Kit FRDM14464-U2J Kit adapts USCAR style har- ness to Jetronic/Minitimer style injectors.
Starter Index Plate For 1979-95 5.0L FRDM7007-B Replacement starter index plate, which installs between the block and the transmis- sion bellhousing, fits all 1979-95 Mustang V8 with manual transmission. Plate helps position the starter and ensure proper alignment.
FRDM6379-B
Flywheels Ford Racing has both stock replace- ment and SFI ap- proved flywheels available. Part No.
FRDM6375-B302
Description
Dual Fuel Pump Kit FRDM9407-GT05 Recommended for applications with over 400
FRDM4216-A210 Flywheel Bolts (10), M/T Only, All Pushrod V8 Engines FRDM6375-A302B Pre-1981 302/351 Engines With 157T Flywheels. Billet Steel, SFI App. FRDM6375-B302 1981-Up 302 Engines, Cast Iron, Stock Replacement FRDM6375-D302B Small Block, 157T Flywheel, 0-Balance, Billet Steel, SFI App. FRDM6375-N427 1965-Up 360, 390, 427 “FE" Engines, 184T, Billet Steel, SFI App. FRDM6379-B Flywheel Bolts (8), M/T Only, All 4.6L Modular Engines Roller Pilot Bearings Production type roller pilot bearings are pre-greased. Part No. Description FRDM7600-A SB Ford 289/302/351W/351C FRDM7600-B Ford Modular 4.6L
horsepower, kit is designed to fit 2005-09 Mustang GT and includes dual fuel pumps, drop-in housing, fuel pump driver module and wiring
harness from 2007-09 Shelby GT500. Calibration required. Note: Use of this kit in a 2010 Mustang will result in an incorrect fuel gauge reading.
Heavy Duty Clutch Kits 10.5" kits consist of heavy duty pressure plate, clutch disc and throwout bear- ing. Heavy Duty and “King Cobra” kits fit all small block Fords, including 4.6L SOHC/DOHC engines. “King Cobra” kit utilizes severe duty pressure plate. A new flywheel is required in vehicles originally equipped with a 10" clutch. Part No. Description FRDM7560-A302N Mustang HD Clutch Kit FRDM7548-A Replacement Throwout Bearing, Fits 1979-04 Mustang V8 Pressure Plate Bolt And Dowel Kit FRDM6397-A302 Kit includes necessary bolts and dowel pins to mount and align 10.5” dia. dia- phragm style clutch and pressure plate to Ford Racing flywheels. Includes (6) 8mm bolts and (3) dowel pins.
2011-14 Mustang GT Performance Calibration With High-Flow Air Filter FRDM9603-MGTB
Add 16 horsepower and 7 ft./lbs. of torque, while significantly improving performance and throttle response of 2011-14 Mustang GT. Kit includes a high-flow K&N air filter and the ProCal too with performance calibration.
High-Torque Mini Starter FRDM11000-B51
Designed for small block Ford 289- 351W and 351C engines, mini starter provides increased header clearance when compared to pre-1989 units, yet offers more cranking power. Starter weighs 5 lbs. less than early units and is sold complete with battery cables and instructions. Note: Must use diode-protected fenderwell solenoid.
310
Made with FlippingBook flipbook maker