Lug Nuts From common to hard-to-find, Gorilla manufactures a lug nut to fit just about every wheel. Sold in bags of four. Note: Open end lug nuts are often required when using extended length, drag race wheel studs.
Part No.
Size
Part No.
Size
Part No.
Size
Cragar SST (1.380" Shank), Closed End GOR84137B
Acorn, Closed End GOR71127B
Standard Mag (.750" Shank), Closed End GOR73137B
12mm x 1.25 12mm x 1.50 14mm x 1.50
GOR71137B GOR71147B GOR71177B GOR71187B
12mm x 1.50
12mm x 1.50
GOR84177B GOR84187B
7/16" 1/2"
GOR73177B GOR73187B
7/16" 1/2"
7/16" 1/2"
Cragar SST (1.380" Shank), Open End GOR84037B Short Shank (.330" Shank), Closed End GOR72137B GOR84077B
Standard Mag (.750" Shank), Open End GOR73037B
Short Mag (.500" Shank), Closed End GOR73137SMB
12mm x 1.50
12mm x 1.50
12mm x 1.50
7/16"
GOR73077B GOR73087B
7/16" 1/2"
GOR73177SMB GOR73187SMB
7/16" 1/2"
Extended Mag (1.00" Shank), Closed End GOR74137B
Short Mag (.500" Shank, Open End GOR73077SMB
12mm x 1.50
12mm x 1.50
GOR72177B GOR72187B
7/16" 1/2"
7/16" 1/2"
GOR74177B GOR74187B
7/16" 1/2"
GOR73087SMB
Lug Nut Washers Made from the finest materials, zinc finished and chrome plated. Sold in packs of five. Part No. Description
Telescoping Power Wrenches
Great tools to have at the track or on the road. Wrenches have a 14"
AME79903B AME79912
long handle that telescopes to 22" for amazing leverage. Power wrenches are 1/2" drive with a rubber handle. Sold complete with sockets in a vinyl carrying case. Part No. Description GOR1334 Power Wrench With 3" Extension And (2) Thin Wall Sockets (3/4" & 13/16") GOR1721 Power Wrench With Dual Sockets, (1) For 17mm & 19mm (3/4"), (1) For 13/16" & 23mm (7/8") Replacement/Accessory Components GOR34SKT 3/4" Thin Wall Socket, 1/2" Drive GOR1316SKT 13/16" Thin Wall Socket, 1/2" Drive Mag Wheel Brush GORWB-1 Super soft brush helps clean aluminum wheels without scratching, even in hard-to-reach areas.
I.D.
O.D.
GOR79900B GOR79901B GOR79903B GOR79912
Standard Mag Duplex Mag Short Shank Cragar Center
.695" .750" .695" .695"
1.062" 1.125" 1.224" 1.250"
Valve Stems And Caps Chrome plated valve stems are sold in packs of four. Part No. Description GORVS401-C Outer Mount Valve Stems GORVS402-C Inner Mount Valve Stems GORVS403-C Angle Valve Stems GORVS404-C Snap-In Chrome Valve Stems, Shorts GORVSC-C Valve Stem Caps AMEVS401-C
AMEVS403-C
GM âFâ-Body In-Tank Fuel Pump GMSGM722-2
Fuel Tank Insert For 1979-98 Mustang GMSGMTI7998 Tank insert has
-10AN feed and -6AN return for conversion to an external fuel pump. Insert is compatible with
carbureted or fuel injected engines and will also fit '99-04 Mustangs with minor modifications. Mounting hardware is included.
Pump's output is 255 LPH @ 45 PSI, enough to feed up to 775 horsepower. Fits all 1982-02 Camaro/Firebird LT1/LS1 and 1997- up Corvette LS1/LS6. Hardware is included.
332
Made with FlippingBook flipbook maker