ELECTRICAL, GAUGES & IGNITION
Solder Slugs Use solder slugs to secure ring terminal ends to bat- tery cable. Individual pieces are the correct amount of solder to be used for each size of cable. Package of 10. Part No. Description ALL76131 Slug For 2 Gauge Terminals ALL76132 Slug For 4 Gauge Terminals Ring Terminals Use to repair or build custom length battery cables, or when installing a battery disconnect switch. Terminals may be crimped or soldered to wire. Sold in pairs with heat shrink sleeving for a waterproof connection. Part No. Description ALL76116 2 Gauge, 5/16" Hole ALL76117 2 Gauge, 3/8" Hole ALL76118 4 Gauge, 5/16" Hole ALL76119 4 Gauge, 3/8" Hole Impact Crimper ALL76135 Excellent for permanently crimping standard cable ends to battery cables. Gold Battery Terminals Terminals are machined from solid brass stock, 24k gold plated for maximum conductivity and feature 5/16" fasten- ers to secure battery cables with ring terminal ends. Top post terminals have additional provisions for attaching accessory or ground wires for a clean appearance. Sold in pairs. Part No. Description ALL76120 Top Post ALL76122 Side Post Battery Terminal Covers ALL76150 Covers slip over battery cables and cover battery terminals to prevent ac- cidental shorting. Fit most top post mount batteries. Required by many sanctioning racing bodies. Package of 2 includes one black and one red cover. Battery Cable Boots ALL76154 Battery cable boots can be used for a variety of applications including cover- ing battery terminals on smaller terminal batteries and starter solenoid connec- tions. Boots have an opening that will accept up to 2 gauge cable. Sold as a pair, one red and one black. Battery Cable Thru Stud ALL76142 Run battery cable through firewall or any body panel safely. 3/8"-16 thread. ALL76131 ALL76120 ALL76122
Firewall Cable Bushing Mounts securely to the firewall and locks onto the wire for a waterproof and vibration proof seal. Part No. Description ALL76137 2 Gauge ALL76138 4 Gauge Battery Disconnect Switches
Battery disconnect switches control electrical supply to the vehicle allowing vehicle to be shut down in the event of an emergency or to secure vehicle when not in use. Disconnects are offered as a single pole version and a double pole with two separate circuits for vehicles equipped with an alternator. Standard Duty Switch With Decal Standard duty switch mounts in a 3/4" hole in a panel up to 1/4" thick and includes a decal to indicate On/Off position. Switch has 3/8"-24 terminals and is rated at
175 amp continuous duty. Double pole switch also has 10-32 studs rated at 20 amp continuous duty. Part No. Description ALL80156 Switch w/Decal (Single Pole)* ALL80157 Switch w/Decal (Double Pole) † Standard Duty Switch With Panel Standard duty switch is pre-mounted in a 2-3/4" x 3-1/4" aluminum panel with brightly screen printed graphics to indicate the On/Off position. Switch has 3/8"-24 terminals and is rated at 175 amp continuous duty. Double pole switch also has 10-32 studs rated at 20 amp continuous duty. Part No. Description ALL80158 Switch w/Panel (Single Pole)* ALL80159 Switch w/Panel (Double Pole) † Severe Duty Switch With Decal Heavy duty switch mounts in a 3/4" hole in a panel up to 1/4" thick and include a decal to indicate On/Off position. Switch has
ALL80156
ALL80158
ALL80155
1/2"-20 terminals, is rated at 300 amp continuous duty and is sealed to resist weather and help prevent internal corrosion. Double pole switch also has 10-32 studs rated at 20 amp continuous duty. Part No. Description ALL80154 Switch w/Decal (Single Pole)* ALL80155 Switch w/Decal (Double Pole) † * Single Pole Disconnect has two terminals and is recommended for vehicles not using an alternator that needs ability to be shut down in the event of an emergency or when securing a vehicle by shutting all power off to the vehicle. Note: When attempting to shut down a vehicle with an alternator using a single circuit battery disconnect, the alternator may continue supplying power to the vehicle ignition system allowing vehicle to continue to run. † Double Pole Disconnect has four terminals with two separate circuits which is recommended for a vehicle with an alternator that needs to be
shut down in the event of an emergency. Battery Disconnect Boots Protect the terminals on battery disconnects from being accidentally shorted. Part No. Description ALL76152 Red, 2-Pack ALL76153 Black, 2-Pack
34
Made with FlippingBook flipbook maker