Billet Cap And Bung Assemblies Black anodized, billet aluminum cap and bung assemblues are ideal for custom fuel cells, valve covers, oil tanks, etc. Bolt-on ver- sions include stainless hardware. Part No.
4-Barrel Multi-Point Systems Avenger EFI Engine Management Systems
Ready for the street or strip with the swap of an intake manifold, multi-point systems are
compatible with stock, crate or custom built Chevy engines. The system’s self tuning capability eases tuning using the hand-held tuner (included). The system includes a single plane intake mani- fold, billet throttle body, ECU, wiring harness, fuel rails, injectors, fuel pump and hardware. Part No. Description HLY550-811 Small Block Chevy, 36 Lb. Injectors, Up To 500 HP HLY550-831 Big Block Chevy/Rect. Port Heads, 48 Lb. Injectors, Up To 650 HP HLY550-836 Big Block Chevy/Oval Port Heads, 48 Lb. Injectors, Up To 650 HP Terminator ™ Stealth 4bbl Throttle Body EFI Kit Looks like a carburetor, performs like fuel injection. 4150 4bbl.
Description
HLY241-226 HLY241-227 HLY241-228 HLY241-229 HLY241-230
Fuel Cell Cap And Bung, 6-Bolt Flange Fuel Cell Cap And Bung, 12-Bolt Flange
Fill Cap And Aluminum Weld Bung, 1.38” Opening Fill Cap And Steel Weld Bung, 1.38” Opening Fill Cap And Aluminum Bung, 4-Bolt Flange
GM LS Retro-Fit Oil Pan Kits Premium, cast aluminum oil pans are specifically designed when retro- fitting a popular GM LS engine
square mounting flange, available in polished or hard core gray™ finish and able to support 650 HP. Self tuning ECU eliminates need for lap top and 3.5" full color touch screen makes installation/tuning simple and quick. Additional features include timing control option for GM small cap HEI and
into 1955-87 GM muscle/classic/ truck chassis. Pan offers OEM fitment of oil filter mounting, oil cooler provision,
Ford TFI distributors along with connections for Ford, GM TH350 and 700R4 transmission. Available in master kit version which includes fuel pump, filters, 40' of hose and all necessary fittings. Part No. Description HLY550-440 EFI LKit, Shinny HLY550-440K EFI Master Kit, Shinny HLY550-441 EFI Kit, Hard Core Gray ™ HLY550-441K EFI Master Kit, Hard Core Gray ™ EFI Camshaft Sync System For Belt Drive Kits The kit will provide a plug and play cam position signal to Holley EFI systems as well any EFI system that external, dry timing belt, cam drive systems. The components in the kit include a 3-wire Hall Effect sensor, a billet aluminum bracket, mounting hardware, a mating connector, and a stainless steel flying magnet screw. Part No. Description HLY556-114 Big Block Chevy, Standard Cam Height HLY556-119 Small Block Chevy, Standard Cam Height Throttle Position Sensor Kit HLY534-202 reads a digital square wave cam input signal. The bracket assembly allows for mounting in a variety of locations. This system is designed for use with Jesel and similar
etc., while providing maximum clearance for vehicles where the steering linkage is behind the crossmember, such as early “F” or “X” body. Kit is sold complete with oil pan, pick-up tube and necessary hardware. Part No. Description HLY302-1 GM LS Retro-Fit Oil Pan HLY302-2* GM LS Retro-Fit Oil Pan, Improved Clearance For 1967-69 “F” And 1969-74 “X” Body Accessory Component HLY302-11 GM LS Retro-Fit Oil Pan Baffle Kit, Bolt-In For HLY302-2 NEW! * HLY302-2 pan is approximately 1/4" shallower in the front and has a shallower, but longer sump when compared to HLY302-1. Hydramat Holley’s
HLY16-107
HLY16-106
Hydramat reservoir system is
HLY16-108
designed to reduce fuel starvation issues pres- ent in hard acceleration,
HLY16-103
HLY16-100
stopping, inclines, cornering and low fuel conditions. Designed for flat bottom cells or gas tanks that do not have a drag racing sump and need fuel control and supply without baffling to prevent fuel starvation. All Hydramats have female NPT fittings and do not require sealers or tape. Part No. Description HLY16-100 Hydramat 15” x 15” Cross, 3/8” NPT Center Pick-up HLY16-102 Hydramat 15” x 8” Cross, 3/8” NPT Center Pick-up HLY16-103 Hydramat 8” x 8” Cross, 3/8” NPT Center Pick-up HLY16-104 Hydramat 11” x 11” Cross, 3/8” NPT Center Pick-up HLY16-105 Hydramat 15” x 3” Rectangle, 3/8” NPT Center Pick-up HLY16-106 Hydramat 11” x 11” Square, 1/2” NPT Center Pick-up HLY16-107 Hydramat 15” x 15” Square, ½” NPT Center Pick-up HLY16-108 Hydramat 8” x 3” Rectangle, 3/8” NPT Center Pick-up
Install the new Holley TPS kit and make it work with modern electronic overdrive transmissions like the 4L60E and 4L80E. The sensor supplies the needed signal to an electronic transmission and a car- buretor. It drives off the primary throttle shaft for accurate voltage readings. All installation hardware and an instruction guide are included.
351
Made with FlippingBook flipbook maker