Drag Race 4- And 5-Speed Transmission Replacement Components A variety of replacement components are available for Jerico 4- and 5-speed drag race transmissions. Part No. Description JER34743-DS Rear Seal JERBCH90 Front Bearing Retainer, 4-Speed Only JERN6130 Shift Finger Seal JERN11123 Front Seal, All Exc. BB Ford 10-Spline JER0M1037 Dog Ring, 37-Spline, Early 4-Speed JER120 O-Ring For Countershaft, Late Top Loader Style 4- And 5-Speed JER6308-NM Front Bearing, All 4-Speed JERSDP-A Detent Pin, All 4- And 5-Speed
Forged Billet H-Beam Connecting Rods Forged series 4340 steel connecting rods are core hardened to increase tensile strength and mag-particle inspected. Rods are fitted with ARP fasteners and finish honed. Center-to-center dimensions are held within +/-.001" and journals are honed to +/-.0001". All rods listed are bushed for full floating wrist pins. Sold in sets of eight unless specified. Part No. Description Housing Bore Wrist Pin Dia. Big End Width Pin End Width Fastener Size/Type Gram Weight K1T007AV25624 Chrysler Hemi 6.243" 2.250" .927" .934" 1.000" 7/16" 622 K1T012AD25600 SB Chevy 6.000" 2.225" .927" .940" 1.010" 7/16" 635 K1T012AG33639 BB Chevy 6.385" 2.325" .990" .992" 1.062" 7/16" 740 K1T012AG33680 BB Chevy 6.800" 2.325" .990" .992" 1.062" 7/16" 785 K1T012BC21146* Chevy Ecotec 145.5mm 52.125mm 23mm 23.98mm 23.98mm 3/8" 550 * Set of four. Forged Steel Crankshafts Crankshafts are made from 4340 steel and undergo core hardening for added durability and mag-particle inspection for superior quality control. Part No. Description Stroke Main Dia. Rod Dia. Min. Rod Length Flange Weight K1T011DAI340 SB Ford 302 3.400" 2.250" 2.100" 5.400" 6-Bolt 47 lbs. K1T011EAD400 SB Ford 351C 4.000" 2.750" 2.100" 6.200" 6-Bolt 61 lbs. K1T012DAD348 SB Chevy 3.480" 2.450" 2.100" 5.700" 6-Bolt 53 lbs. K1T012DAD375 SB Chevy 3.750" 2.450" 2.100" 5.700" 6-Bolt 55 lbs. K1T012GAG425 BB Chevy 4.250" 2.750" 2.200" 6.385" 6-Bolt 81 lbs.
Valve Springs K-Motion Valve Springs are coiled from the very best silicon or H-11 tool steel available for superior dependability. Sold in sets of 16. To order a single spring, add -1 to the end of the part number. Part No. Type Diameter Installed Height Open Height Coil Bind Notes KMOK-700 Single Silicon 1.265" 115 Lbs. @ 1.700" 350 lbs. @ 1.150" 1.050" Cams Up To .590" Lift KMOK-750 Single H-11 1.265" 130 Lbs. @ 1.700" 380 lbs. @ 1.150" 1.030" Cams Up To .610" Lift KMOK-800 Double Silicon 1.460" 155 Lbs. @ 1.850" 450 lbs. @ 1.150" 1.085" Cams Up To .700" Lift KMOK-850 Double Silicon 1.550" 130 Lbs. @ 1.900" 380 lbs. @ 1.225" 1.160" Cams Up To .630" Lift KMOK-900 Double H-11 With Damper 1.550" 225 Lbs. @ 1.850" 625 lbs. @ 1.150" 1.090" Cams Up To .700" Lift KMOK-950 Double H-11 With Damper 1.550" 230 Lbs. @ 2.000" 680 lbs. @ 1.300" 1.150" Cams Up To .750" Lift KMOK-1000 Double H-11 With Damper 1.625" 225 Lbs. @ 1.900" 740 lbs. @ 1.150" 1.090" Cams Up To .750" Lift KMOK-1000H Double H-11 With Damper 1.625" 240 Lbs. @ 2.000" 850 lbs. @ 1.150" 1.090" Cams Up To .850" Lift KMOK-1100 Double Silicon w/Damper 1.550" 200 Lbs. @ 1.900" 500 lbs. @ 1.260" 1.150" Cams Up To .640" Lift KMOK-1150 Double w/Damper 1.550” 230 Lbs. @ 2.000” 628 Lbs. @ 1.250” 1.150” Cams Up To .700” Lift KMOK-1500 Triple H-11 1.650" 260 Lbs. @ 2.000" 940 lbs. @ 1.150" 1.090" Cams Up To .850" Lift KMOK-1600 Double Silicon w/Damper 1.550" 180 Lbs. @ 1.950" 520 lbs. @ 1.320" 1.170" Cams Up To .720" Lift
Titanium Retainers K-Motion Retainers are manufactured from high strength titanium and offer an additional .050" installed height over standard retainers. Used with 10° locks. Sold in sets of 16. Part No. Application KMOK-7320 K-850, K-900, K-950, K-1100 Or K-1600 KMO Valve Springs KMOK-7330 K-1000 Or K-1000H K-Motion Valve Springs
Valve Locks K-Motion Valve Locks are fully machined and heat treated. They feature the more desirable 10° angle that helps eliminate the “pull thru” problem common with standard 7° locks. Sold in sets of 16 pair. Part No. Valve Stem Height KMOK-6110 † 11/32" Standard KMOK-6120 † 3/8" Standard KMOK-6130 11/32" Standard KMOK-6140 11/32" +.050" † Recess for lash caps
376
Made with FlippingBook flipbook maker