Ready Gasket Make leakproof, blowout resistant gaskets in just one minute. Specified on the production lines by GM, Ford and Chrysler, elastomeric rubber gasket maker is sensor safe and outperforms pre-cut gaskets. Sold in 5 oz. cartridge or 190 ml. aerosol can. Tempera- ture range of -75° To 450° F. 5 Oz. Cartridge Part No. 190 ml. Aerosol Can Part No. LOC37512 LOC40480 Hi-Tack Stick Gasket Dressing LOC39158 Similar in function to Hi-Tack Gasket Sealant liquid, but solvent free, less messy and low odor. Wax-like stick sets quickly to a very tacky film, seals and holds the heaviest gaskets in place. Re- sists all automotive fluids. Sold in 19 gram stick. Anaerobic Gasket Makers Flexible gasket material eliminates pre-formed, pre-cut, paper and cork gaskets. Ideal for water pumps, thermostat housings, transmission pans, etc. Gasket Maker 515 is designed for rigid, machined surfaces with less than .015” gap, while Gasket Maker 518 is for use on flanged mating surfaces with gaps up to .050”. Sold in 1.69 fl. oz. tubes (50 ml.). Part No. Description LOC38655 515 Gasket Maker, 1.69 Oz. LOC2096059 518 Gasket Maker, 1.69 Oz. High Flex Gasket Maker LOC38657 Anaerobic form-in-place gasket maker that fills gaps to 0.020" and cures to a tough solvent- resistant gasket that flexes with flange movement caused by vibration, pressurization or thermal change. Temperature resistant to 350°F.
Copper Anti-Seize Stick LOC37616 Same performance as traditional Loctite ® cop- per anti-seize paste in a semisolid stick form, offering more portability and less mess to 1800°F.
Silver Anti-Seize Stick LOC37617 Same performance as traditional Loctite ® silver anti-seize paste in a semisolid stick form, offering more portability and less mess to 1600°F. Copper Anti-Seize Lubricant LOC38650
Copper anti-seize and thread lubricant is used to prevent seizing, corrosion and galling under high temperatures. Ideal for spark plug threads installed in alu- minum heads, exhaust components and bolts, etc. Sold in a 8 oz. brushtop can.
Silver Anti-Seize Lubricant LOC37565 A heavy-duty, temperature-resistant (to 1600°F), petroleum based lubricant compound fortified with graphite and metallic flakes. Will not evaporate or harden in extreme cold or heat. Use during assembly
to prevent seizing, galling, corrosion Dielectric Tune-Up Grease
Provides a moisture-proof barrier that lubricates and protects electrical connections/wiring from salt, dirt and corrosion. Extends life of bulb sock- ets. Prevents voltage leakage around electrical connections. Part No. Description LOC37534 .33 Oz. Tube LOC37535 .80 ml. Tube Freeze And Release LOC996456 Instantly freezes seized/rusted metal parts down to -45°F. The shock-freeze effect causes microscopic cracks in the rust, al- lowing the lubricant to wick directly into the rust. Assembly can be disassembled after 1-2 minutes penetration time. Heavy Duty Rubberized Undercoating LOC37580 A heavy-duty undercoating that seals, protects and insulates. Rubberized for maximum durability. Weatherstrip Adhesives
Copper Gasket Adhesive LOC37583 Quick drying, copper sealant prevents gasket burnout, dissipates heat and improves heat transfer. Fills surface imperfections and hot spots. Resists all automotive fluids and gasoline. Adhesive has a temperature range of -50° to 500°F. Sold in a 9 oz. aerosol can.
Aviation Gasket Sealant LOC1525607 Non-hardening brushtop gasket dressing resists gasoline, oil and grease, and is designed for close- fitting machined surfaces, sealing hoses and solid gaskets. Sold in a 16 oz. brushtop can.
Fast drying, high strength, waterproof adhesive for bonding automotive weatherstripping and moldings. Withstands tempera- ture extremes. Resistant to fuels, oils, grease and most solvents. 5 fl. oz. tube. Part No. Description LOC37532 Black Weatherstrip Adhesive, 5 Fl. Oz. Tube LOC40669 Yellow Weatherstrip Adhesive, 5 Fl. Oz. Tube
388
Made with FlippingBook flipbook maker