Digital-7 Programmable Ignition Controls MSD7531 Program individual cylinder manage- ment, step retards, rev limits, shift points and more. The
Replacement Magnetic Trigger Cable MSD8860
Two-wire, 6' cable connects MSD Ignition Control to MSD distributor with magnetic pickup. Vibration Mounts Prevent transmission of vibrations from chassis to ignition controls. Part No. Description MSD8800 4 Mounts, MSD 7AL-2, 7AL-3, 8 & 10 MSD8823 4 Mounts, MSD 5 & 6, SCI, Digital-7 Series MSD8825 3 Mounts, Pro Power Coil Noise Filter MSD8830 Removes radio noise caused by an MSD ignition system. Also removes voltage surges that interfere with other MSD accessories such as the Two Step.
Programmable Digital-7 Plus with RPM/time based rev limit- ing map is the top-of-the-line. All units deliver 535 volts of primary voltage,190 millijoules of spark energy and are compatible with 4-,
6- or 8-cylinder engines. Wiring harness and mounting hardware are included. Not NHRA-legal in all classes except Pro Modified. Programmable Digital-7 Accessories Adjustable Intensity LED Shift Light MSD7542 Compact shift light can be adjusted to control the intensity of the LED, reduced for night time racing, increased for daylight. Plugs directly into the Programmable 7-Series ignition.
Specialized Wiring Harnesses And Adapters Part No.
Spark Plug Wire Sync Kit MSD7555
Using the Digital-7’s Individual Cylinder Management feature, Sync Kit attaches to the number one spark plug wire, senses the trigger signal and sends information to the
Description MSD8861 GM HEI Module Bypass Cable Assembly To MSD 6 Or 7-Series Ignitions MSD8862 Shielded 2-Wire Magnetic Trigger To MSD 6- Or 7-Series Ignitions, 6' MSD8869 Ford Duraspark Connector To MSD 6- Or 7-Series Ignition, 4" MSD8874 Ford TFI To MSD 6- Or 7-Series Ignition MSD8876 GM Dual Connector Coil To MSD 6- Or 7-Series Ignition MSD8877 GM 1996-Up Single Connector Coil To MSD 6- Or 7-Series Ignition
ignition through a fiber optic cable. Universal Cam Sync Pick-Up Kit MSD2346 Includes non-magnetic pick-up, connectors, mag- net and retainer. NOTE: A bracket must be fabricated and the magnet installed on the cam gear.
MSD8920
Tachometer Adapters Required for some tachometers when vehicle has an MSD ignition. Part No. Description MSD8910 Points/OEM Ignition Module, When Triggering An MSD 6- Or 7-Series Ignition Using White Wire Or Points Input MSD8918 GMR Pick-Up, Activate Tachometer, Shift Light Or RPM-Activated Switch, Ideal For Coil-On-Plug Ignitions MSD8920 Magnetic Pick-Up, When Triggering An MSD 6- Or 7-Series Ignition With Green/Violet Input Wires
Manual Launch Control/Shift Light MSD7551 Make last second launch RPM adjustments to the Digital-7 to compensate for changing track conditions. Plugs into RS232 computer harness and uses two dials for adjustments. MAP Sensors Required for the boost/retard feature of Programmable Digital-7 ignitions. Part No. Description MSD23121 2-Bar MAP Sensor, 2-30 PSI MSD23131 3-Bar MAP Sensor, 2-45 PSI
DIS Plus HO Ignition Control Engineered for drag race only, distributorless ignition applica- tions, the DIS Plus HO Ignition Con- trol produces outstanding spark energy and primary voltage. Ideal for engines running high boost pressures from turbos, blowers or nitrous oxide. Not for street use. Part No.
8-Plus Ignition Control MSD7805 New ignition has the same
output as the original MSD-8, but with a smaller housing, improved internal components and a built-in 2-step rev control. It can fire two coils at once for engines with dual spark plugs and is compatible with 4-, 6- or 8-cylinder applications. Use with MSD8201 Pro Power coil.
Description
MSD62153
DIS-4 Plus HO, 2-, 3- Or 4-Coil Packs
Related Components MSD8870
GM Coil Interface Module
MSD88812
Wiring Harness, DIS-4 To Dual Ford Coil Packs
396
Made with FlippingBook flipbook maker