Pro-Clamp Separators MSD8843 Keeps plug wires neat and insu- lated from sources of engine heat. Snap together separators sandwich wires in place. Two 4-wire, two 3-wire and four 2-wire separators are included. Wire Separators
Shrink Sleeves With Cylinder Numbers MSD3415
Shrink sleeves are numbered 1-8 and slide over the spark plug boot for a secure connection. Spark Guard MSD8804
A dielectric grease that stops voltage leaks, eases boot removal, prevents moisture buildup inside the spark plug wire boots and protects against radio (RFI) noise. Simplifies the installa- tion of MSD Universal Spark Plug Wire Sets. Will not dry up or harden and retains its spark isolat- ing capabilities indefinitely. Comes in .5 oz. tub.
MSD’s Wire Separators keep plug wires away from hot exhaust, and each other, to prevent inductive crossfire. Part No. Description MSD8841 Dual Plug Wire Separators, 8-8.5mm Wires MSD8842 Dual Plug Wire Separators, Wires With Sleeve Firewall Feed-Thru MSD8211 Rynite and nylon feed-thru that has 1/2" of insulation to insure that maximum spark reaches the plugs and to prevent voltage leaks from cockpit mounted coils. Mounts in a 1" diameter hole in the firewall. Shrink Sleeving MSD3407
Pro-Crimp Tool II A must for any tool box. Interchange-
able jaws allow a variety of crimps with one heavy duty tool. Hardened steel frame features molded hand grips. Tool includes preci-
sion crimping/stripping jaws for MSD spark plug wire terminals. Other dies are also offered. Part No. Description MSD35051 Pro-Crimp Tool II MSD3506 Amp Pin Terminal Dies MSD3507 Amp Lug Terminal Dies MSD3508 Plug Wire Terminal Dies MSD3509 Weathertight Terminal Dies MSD3510 Deutsch Terminal Dies Single Channel Digital Ignition Tester MSD8998 Test functions of
May be used to protect electrical connections of any kind as well as sealing spark plug boots to plug wires. Simply install the sleeve in the desired area and apply heat. Sold in sets of 18. Pro-Heat Guard MSD3411 Heat resistant, glass woven core sleeve is coated with silicone rubber to resist abra- sion and temperatures up to 1,000°F. Slides over most plug wire. Sold in 25' rolls. Pro-Boot Guard MSD3412 Thick, fiberglass woven sleeve is coated with silicone rubber and resists extreme temperatures. Sold in 6' roll. Cylinder Markers MSD3414 Save time and ensure that the plug wires are installed correctly. Molded from plastic, they are avail- able in 8.5mm size.
MSD single channel ignitions, including
the Digital-7 Program- mable unit. Produces a simulated trigger signal that fires the igni- tion. A spark plug with a very large gap is included for clipping
to the coil wire. May also be used to check tachometer and RPM limiter accuracy. Works with 4, 6 or 8 cylinder engines and simu- lates up to 16,000 RPM of operation. High Pressure Electric Fuel Pump MSD2225
Roller vane pump can stand alone in multiport EFI’s or work as a “booster” for nitrous
oxide systems. It mounts in-line, outside of the fuel tank and delivers 43 GPH @ 40 PSI, sufficient fuel flow for up to 500 horsepower. Pump has 3/8" inlet and 5/16" outlet nipples, includes mounting clamps and hardware.
404
Made with FlippingBook flipbook maker