ENGINE
SB Chevy Rocker Arm Stud Kit ALL90230
Chevy Cylinder Head Bolts
Grade 8, 3/8"-24 original equipment style studs require a 7/16"-14 tapped hole in the head. Studs have a 2.375" overall length. Package of 8. SB Chevy Flat Pushrod Guide Plate ALL90250 Guide plates are designed for 5/16" hardened pushrods and stabilize valvetrains using high lift camshafts and high pressure valve springs. Package of 8. Valve Lash Wrenches Allstar Valve Lash Wrenches save pre- cious time and make valve adjustment easy. No more fumbling with two separate wrenches. Available for Jesel, T&D and other poly-lock style rocker assemblies. Part No. Description ALL96400
Original equipment Grade 8 cylinder head bolts are ideal for stock or budget performance rebuilds. Part No. Description ALL87000 SB Chevy, 34-Pack ALL87002 BB Chevy, 32-Pack
ALL87002
Head Dowel Pin Kits Dowel pins are an often overlooked item when performing a rebuild or upgrading cylinder heads. Dowel pins keep gaskets in position and properly align cylinder heads to the engine block. Kits include four pins. Part No. Description ALL87020 SB Chevy, Olds ALL87026 BB Chevy ALL87024 LS GM ALL87028 SB Ford
7/16" Adjuster Wrench, 1/8" Allen Wrench, Jesel Assemblies 1/2" Adjuster Wrench, 3/16" Allen Wrench, T&D Assemblies
Port And Polish Kit ALL11052 Kit includes an assortment of 60, 80 and 120 grit cartridge rolls for clean- ing and modifying intake and exhaust ports to match gaskets, remove casting marks and for smoothing out runners. Two 1/4" mandrels are included with each kit. Dykem Layout Fluid ALL12070 Apply layout fluid to the work surface to enhance visibility of scribes during fabrication. Blue fluid dries in minutes to a uniform, thin film without cracking or chip- ping. 4 oz. container has a built-in brush under cap. Not intended for use in set up of ring and pinion gear sets. SB Chevy Fuel Pump Mount Plate ALL40254 O.E. style plate replaces lost or missing mounting plate required to mount mechanical style fuel pump to most small block Chevrolet engines. Clear zinc plated finish may also be painted to match original appearance. Mount- ing hardware included. SB Chevy Fuel Pump Block Off Plate ALL40255 Plate covers mechanical fuel pump engine opening on most small block Chevrolets when omitting a mechanical style fuel pump. Plate is often used when converting to electric or belt driven fuel pumps. Clear zinc plated finish may also be painted.
ALL96401 ALL96402 ALL96403
9/16" Adjuster Wrench, 3/16" And 7/32" Allen Wrenches, For Stud Girdle Assemblies
5/8" Adjuster Wrench, 3/16" And 7/32" Allen Wrenches, Poly Lock
High Performance 11/32" Umbrella Valve Seals ALL90235 High quality umbrella style seal moves with valve and deflects oil away from valve guide area. Seals have an O.D. of .750" to fit under most stock or larger diameter valve springs and a .580" I.D. to clear valve guides on most engines. Seals require no machining for installation. Set of 16. High Performance PTFE Valve Seals
Seals have spring loaded wipers for maximum oil control. Machining is required for most installations. Set of 16. Part No.
Description
ALL90240 ALL90241 ALL90242 ALL90244
11/32" Valve Seals, .620" Seal O.D.,.531" Mach. Tool Guide O.D. 11/32" Valve Seals, .600" Seal O.D.,.500" Mach. Tool Guide O.D. 3/8" Valve Seals, .620" Seal O.D.,.531" Mach. Tool Guide O.D. 5/16" Valve Seals, .620" Seal O.D.,.531" Mach. Tool Guide O.D.
Intake Manifold Bolt Kit ALL87010 Grade 8, 12-point flange clear zinc bolts are 3/8" x 1-1/8" long to fit small block Chevys and Chrysler “A” and “B” engines where clearance is insufficient for standard hex head bolts. Sets of 12 include stainless washers.
43
Made with FlippingBook flipbook maker