Oil Pan Gaskets Race quality gaskets are of premium quality and steel reinforced, eliminat- ing the possibility of leakage. Part No.
Dry Sump Oil Tanks Engineered for drag racing, fabricated aluminum, 7" diameter dry sump tanks are available with or without integral breather tanks. Tanks are fitted with large diameter, screw-on billet aluminum caps with O-rings for easy service. Five and six quart capacities. Part No. Description MOR22683 5 Qt. Dry Sump Oil Tank, 12.86" Tall, (3) -12AN Fittings, (1) -12AN Breather Fitting, Use With MOR85465 or MOR85466 Breather Tank MOR22687 6 Qt. Dry Sump Oil Tank With Integral Breather Tank, 14.86" Tall, (1) -16AN Fitting MOR22689 6 Qt. Dry Sump Oil Tank With Integral Breather Tank, 14.86" Tall, (3) -12AN Fittings MOR22677 Straight Extended Tank Mount, 5.25" From Flange To Saddle Base In-Line Screened Oil Filter MOR23860 lines, preventing debris from entering dry sump pump and oiling system components. Filter, which includes -12AN male fittings, features a cleanable, 304 stainless steel screen. Filter Fitting Fitting includes a stainless steel screen to trap metal particles before they reach the pump or engine. Ideal for dry sump tanks, etc. Sold individually. Part No. Description MOR23960 Filter Fitting, 3/4" NPT To -12AN MOR23961 Filter Fitting, -12AN To -12AN MOR23962 Filter Fitting, -16AN To -16AN Dry Sump Breather Tanks Well suited for use as a remote breather/oil separa- tor for dry sump oil tanks, aluminum tanks are 3-1/8" diameter x 6-1/2" tall (less breather). Tanks include non-hooded breather and mounting bracket. Part No. Description MOR85470 Breather Tank, 3/8" NPT Inlet MOR85473 Breather Tank, (2) 3/8" NPT Bungs, 180° Apart 2.5 Qt. Dry Sump Breather Tank MOR85466 Large, 2.5 qt. capacity tank eliminates the need for two tanks, while dual -12AN fittings allow hooking up dry sump pump and vacuum tank. Lightweight aluminum tank is 3" diameter x 17-1/2" tall, includes drain cock, non-hooded breather and mounting bracket. Vacuum Pump Breather Tank MOR85465 Lightweight aluminum oil filter installs in oil system scavenge
Description
MOR93150 MOR93153 MOR93174
SB Chevy, Pre-1985 With 2-Pc. Rear Main Seal BB Chevy, Mark IV, Notched For Stroker Cranks BB Chrysler 383-440, Hemi/Wedge/KB/BAE, Exc. TFX
Oil Pan Stud Kits Stud kits ease oil pan installation and help insure a leak-free seal.
Each kit includes grade 8 heat treated studs and lock nuts with attached washers and serrated faces for positive retention. Part No. Description MOR38350 Oil Pan Stud Kit, SB Chevy/Olds, 18 Pcs. MOR38360 Oil Pan Stud Kit, BB Chevy/Pontiac, 20 Pcs. MOR38361 Oil Pan Stud Kit, BB Chevy Race Pans, 18 Pcs. Oil Pan Dipstick Kits Dipstick kits fit Moroso oil pans with 1/4" NPT dipstick bungs and are offered in traditional chrome plated or stainless steel flex tube versions. Existing “full” and “fill" marks may be used as-is or new marks added. Part No. Description MOR25970 Chrome Plated Steel Dipstick Kit, 24" Overall Length MOR25971 Stainless Steel Flex Tube Dipstick Kit, 20-3/4" Overall Length
T3 Series Dry Sump Oil Pumps The best performing dry sump pumps ever produced by Moroso, T3 Series pumps utilize tri-lobe scavenge sections with individual timing gears for proper clearance at high RPM's. Aluminum bodied pumps weigh
close to 50% less than traditional gerotor pumps and take up to 40% less horsepower to drive. Offered in Single-, 3-, 4-, 5- and 6-stage versions for dragsters or door car applications. Sold complete with necessary fittings and mounting brackets.
Door Car Part No. MOR22341 MOR22343 MOR22344 MOR22345
Dragster Part No. MOR22441
Description
Single-Stage Oil Pump 3-Stage Oil Pump 4-Stage Oil Pump 5-Stage Oil Pump
— — —
Dry Sump Pulleys And Accessories Gilmer style pulleys are machined
MOR23560
from billet aluminum that is hard coat anodized for added durability. Pulleys have a 3/8" pitch and fit 5/8" diameter shafts. Part No. Description MOR23528
MOR23532
Lightweight aluminum tank is for use with Moroso racing vacuum pumps and includes a -12AN fitting to ease plumbing. Tank has a 3-1/8" dia. and 11-1/2" overall height and includes a clamp-on filtered breather. Breather Tank MOR85467 Tank is popularly used on applications using dry sump pumps, vacuum pumps or engines that have “pushed oil” with other breather tanks. Spun alu- minum tank is 10-1/4" tall x 3-1/8" diameter and includes -12AN male side fitting and a -8AN drain plug. Sold complete with billet aluminum panel mount clamp.
Dry Sump Pump Pulley, 28-Teeth Dry Sump Pump Pulley, 32-Teeth
MOR23532 MOR23560 MOR23561 MOR97110 MOR97120 MOR97130 MOR97140 MOR97170 MOR97171
Belt Guide, .062" Thick, 2.50" OD x 1.00" ID Belt Guide, .062" Thick, 3.00" OD.x 1.00" ID Gilmer Drive Belt, 60-Teeth, 22.5" L x 1" W Gilmer Drive Belt, 64-Teeth, 24" L x 1" W Gilmer Drive Belt, 68-Teeth, 25.5" L x 1" W Gilmer Drive Belt, 72-Teeth, 27" L x 1" W
Crankshaft Pulley, 1" Wide, 16-Teeth Crankshaft Pulley, 1" Wide, 17-Teeth
442
Made with FlippingBook flipbook maker