Racing Oil Filters Filters are rated at 27 microns and provide less pressure drop, more flow, less oil by-pass, and maxi- mum oil filtration. Part No. Description MOR22459 Chevy Short Style Oil Filter, 4-9/32" Tall MOR22460 Chevy Tall Style Oil Filter, 5-1/4" Tall MOR22461 Chevy Extra Tall Oil Filter, 8" Tall MOR22462 Chevy Gen. III, 1997-06 GM LS, 13/16"-16 UNF Thread, 3-1/2" Tall MOR22463 Ford 4.6L/GM LS, 2007-Up, 22mm-1.5 Thread, 3-1/2" Tall MOR22465 Remote Oil Filter, 1-1/2"-12 UNF Threads, Replaces Fram HP6, 6-1/4" Tall MOR22470 Ford/Chrysler Tall Style Oil Filter, 5-1/4" Tall “Engine Saver” Pre-Filter Screen MOR23845 Stainless steel screen fits at the top of spin-on oil filters to trap debris before it enters the filter ele- ment. Serves as an “early warning signal” during filter inspection. Fits all small and big block Chevy engines with spin-on oil filters. External Heating Pads Oil Preheaters Element type preheaters increase temper- ature of 12 qts. of oil by 60°F. in 30 minutes for improved performance. May be installed in engine or transmission pans, dry sump tanks, etc. Element is 4-1/2" long and includes 1" NPT fitting and 7' long 110V power cord. Part No. Description MOR23980 Internal Oil Preheater, Aluminum Fitting MOR23990 Internal Oil Preheater, Steel Fitting MOR23991 Internal Oil Preheater, Aluminum Fitting, Self-Contained Lifter Valley Oil Baffles Baffles keep hot oil off of the bottom of intake manifold for increased horse- power and keep lifters in their bores if push- rod or rocker arms fail. Minor trimming required for installation. Not compatible with roller lifters. Part No. Description MOR25050 SB Chevy, Including 18° Cylinder Heads MOR25100 BB Chevy Accumulator galleries if oil pressure drops. It can also decrease the oil level in the pan to reduce windage. A cold start valve releases oil into a cold engine to reduce wear. The Accumulator is 20-1/8" long and 4-1/4" diameter, mounts in any position, holds 3 quart of oil and is tapped for a 1/2" NPT fitting. Use with mount kit MOR23920, oil filter adapter MOR23690 (Chevrolet), and solenoid valve MOR23905. Part No. Description MOR23900 Accumulator, 3 Quart Capacity MOR23920 Accumulator Mount Kit MOR23690 Oil Filter Adapter MOR23905 12 Volt Solenoid Valve Oil is stored under pressure for immediate release into the main Pads adhere to dry sump oil tanks or oil pans to preheat oil. Etched foil distributes heat evenly and silicone outer shell resists oil and dirt. Includes 8", 18 AWG electrical cord with plug for 110 volt AC outlets. Part No. Description MOR23995 6" x 12" Pad, 360 Watts, Hook And Spring Attachment 5" x 7" Pad, 400 Watts, Heats Oil From 66°F To 160°F In 25 Min. 2" x 15" Pad, 150 Watts, Perfect For Narrow Areas MOR23996 MOR23997
Oil Filter Adapters Adapters lower filter approximately 1/2" and accept plumbing for accumulators, external or dry sump pumps, or remote oil filters. Includes hardware and O-rings. Part No. Description MOR23690
Chevy V8, For Accumulators And External Or Dry Sump Pumps
MOR23692
Chevy V8, For Remote Oil Coolers
Billet Oil Filter Bypass Plate MOR23782
Necessary when using a remote oil filter or returning oil from dry sump systems. Fits small and big block Chevys and Merlin big blocks. Plate accepts 1/2" NPT fittings. Mounting hardware and O-rings are included. Oil Bypass Eliminator MOR23775 Machined, billet aluminum adapter eliminates the bypass found in OEM filter adapters, pre- venting unfiltered oil from entering the engine. Adapter features a single inlet and accepts spin-on, stock type oil filters. Fits all Chevy V8 engines. Oil Filter Bypass MOR23770 Fits all small block Chevy V8’s. For use
MOR23996
with wet sump oil systems when remote oil filters or coolers are used. Bypass is cast from aluminum with 1/2" NPT inlet and outlet. Includes gaskets and fasteners. Oil Filter Block-Off Plate MOR23840 Often used on dry sump oil system
installations, plate has a 1/2" NPT port for input pressure line and fits all small and big block Chevy (except Gen. V/VI or those with bolt hole at center of pad). Oil Pump Block-Off Plate MOR23790
Bolt-on aluminum plate seals oil pas- sage on rear main cap when dry sump is used. Requires no drilling or tapping for installation on small, big block and 90° V6 Chevys. Remote Oil Filter Mounts Ideal for dry sump oil systems on installa- tions requiring a remote mounted oil filter. Offered in cast or billet aluminum construc- tion, mounts accept popular spin-on type oil filters. Billet mounts include adapters to accept most popular filters. Part No. Description
MOR23700 Cast Filter Mount, Accepts Ford/Chrysler Filter, Right Inlet/Left Outlet MOR23710 Cast Filter Mount, Accepts Ford/Chrysler Filter, Left Inlet/Right Outlet MOR23750 Cast Filter Mount, Accepts Chevy Filter, Right Inlet/Left Outlet MOR23760 Cast Filter Mount, Accepts Chevy Filter, Left Inlet/Right Outlet MOR23763 Billet Filter Mount, Accepts Most Filters, Side Port Style MOR23764 Billet Filter Mount, Accepts Most Filters, Front Port Style MOR23766 Large Billet Filter Mount, Accepts Most Filters, Vertical Ports
444
Made with FlippingBook flipbook maker