Push-In Valve Cover Breathers/Separators
Valve Cover Hex Head Nuts MOR68550
Breathers direct oil back into the valve cover. Separator is ideal for plumbing crankcase ventilation sys- tems and accepts 3/4" hose. All fit covers with 1.22" dia. opening. Part No. Description MOR68740 Chrome Plated Steel Breathers, Pair MOR68741 Chrome Plated Steel Breather, Each, (1) Breather And (1) PCV Grommet MOR68781 Chrome Plated Steel Oil Separator, Each Positive Locking Valve Cover Breathers MOR68740
Ideal when space is critical or when valve cov- er nuts must be snugged down tighter than finger tight. Install or remove with 1/2" socket. Four per package with 1/4"-20 x 1-3/8" studs included. Valve Cover Stud Kits Use with cast aluminum valve covers to prevent leakage caused by vibration. Choose slotted head or bullet nose studs. Each kit includes 8 studs, lock nuts and washers. Part No. Description MOR68820
Breathers have a threaded tube with collar to mount on any valve cover with a 1.22" dia. opening. Offered in stamped steel or billet aluminum, breathers meet NHRA/IHRA rule requirements for cars running 7.99 and quicker. Sold individually. Part No. Description MOR68785 Oil Filler Cap MOR68660 Push-in, chrome plated oil cap fits all valve covers with a 1.22" dia. hole. Valvetrain Oil Deflectors MOR67700 Lightweight .100" thick, MOR68788
Slotted Head Stud Kit, 1/4"-20 x 1-3/4" Bullet Nose Stud Kit, 1/4"-20 x 1-1/2" Slotted Head Studs Only, 1/4"-20 x 1-3/4" Slotted Head Studs Only, 1/4"-20 x 1-3/8"
MOR68830 MOR97020 MOR97030
MOR68785
Extra Long Valve Cover Wing Nuts Speed up valve cover removal and installation. Matching studs allow easy gasket installation and alignment. Four per package. Part No.
Stamped Steel Breather With Tube For 3/4" Hose Billet Aluminum Breather Without Tube
MOR68610
Description
MOR68581 MOR68603 MOR68610 MOR68630
1/4"-20 With 1-3/8" Long Studs, Clear Powder Coated Aluminum 1/4"-20 With 1-3/8" Long Studs, Black Powder Coated Aluminum 1/4"-20 With 1-3/8" Long Studs, Chrome Plated Steel 5/16"-18 With 1-3/8" Long Studs, Chrome Plated Steel Fits Pontiac 301-455 And Ford FE 332-428
aluminum deflectors redirect oil from pushrods to fulcrum balls, rockers and springs to provide maximum lubrica- tion and cooling. Deflectors extend the life of stock
Low Profile Racing Air Cleaners Performance air cleaner assemblies have high flow elements and fit carbu- retors with 5-1/8" dia. necks. The 3" tall models have a stacking height of only 2-1/2" above the carburetor lip for hood clearance. 4" and 5" tall elements are also available. Choose anodized aluminum, chrome plated steel or fiber design assemblies. Part No. Description
valvetrains and mount easily to stock rocker arm studs. Fits small block Chevy and Ford 302 engines with stamped steel rocker arms. Sold in pairs with mounting hardware. Valve Cover Hold Down Tabs Chrome plated tabs spread the load of the fastener over a larger area to eliminate distortion and gasket leakage. Part No. Description MOR68510 SB Chevy MOR68516 BB Chevy MOR68519 SB Ford MOR68530 Pontiac 301-455 Perm-Align Valve Cover Gaskets Vulcanized rubber/rigid steel frame SB Chevy MOR93021 SB Chevy 18°, 16°, 15°, 13.5° And 12° Dart/Brodix/Edelbrock/All Pro MOR93025 GM LS NEW! MOR93040 BB Chevy MOR93045 Big Chief MOR93050 SB Chrysler MOR93055 BB Chrysler MOR93060 SB Ford gaskets are 3/16" thick and will not leak or blowout. Sold in pairs. Part No. Description MOR93020
MOR65910 MOR65915 MOR65920 MOR97330
14" x 3" Chrome Plated Steel Air Cleaner 14" x 3" Gray/Black Fiber Design Air Cleaner 16" x 4" Aluminum Air Cleaner, Dominator Carb
Replacement 14" x 5" Element
Flat Bottom Racing Air Cleaners
14" diameter, chrome-plated steel air cleaners have a flat bottom to increase the installed height. Includes 3" filter element. Part No.
Description
Fits Holley, Thermoquad Or Q-Jet With 5-1/8" Dia. Neck, PCV Adapter Included Fits Holley 4500 With 7-5/16" Neck
MOR65911 MOR65945
Air Cleaner Stud Adapter MOR66390 Adapts 1/4" air cleaner studs to carbs with 5/16" mounting holes.
447
Made with FlippingBook flipbook maker