Aluminum Fuel Line Large diameter, lightweight thin-wall aluminum tubing replaces smaller di- ameter fuel lines, flows more gas and eliminates fuel starvation. Legal in all classes. Not recommended for high- pressure fuel injection systems. Part No. Description MOR65330 25' Coil, 3/8" OD MOR65340 25' Coil, 1/2" OD Fuel Hose Fittings Hard to find brass fittings have many uses. Part No. Description MOR65130 MOR65390 In-line Fuel Pressure Gauge Fittings Easily plumb 1/8" NPT fuel pressure gauge lines with these black anodized aluminum fittings. Part No. Description MOR65310 3/8" NPT Female To 3/8" NPT Male MOR65315 3/8" NPT Male To -6AN Male MOR65360 3/8" Line With Hose Fittings Fuel Pressure Gauge MOR65370 Heavy duty, 0-15 PSI American-made gauge is marked in 1/4 lb. increments and accurate to within 1%. Compact, 1-1/2" diameter gauge, which includes an 1/8" NPT male fitting, may be directly mounted to fuel pressure regulator, fuel blocks, etc. Fuel Pump Block-Off Plates Block the fuel pump boss when mechanical fuel pump is not used. Available in blue anodized aluminum, chrome plated steel and black anodized billet aluminum. Chevy Cam Buttons Buttons prevent camshaft “walk”, eliminating end play, erratic ignition timing and excessive timing chain wear. Camshaft retaining plate and bolts are included. Part No. Description MOR60460 SB Chevy, Early/Ribbed Timing Cover MOR60461 SB Chevy, Late/Flat Timing Cover MOR60462 BB Chevy MOR60464 Camshaft Bolts and Retainer Only Small Block Chevy Balancer Bolt MOR38770 Description Blue Anodized Aluminum Chrome Plated Steel MOR65394 Small Block Chevy MOR65391 MOR65392 Big Block Chevy, Chrysler, Ford (Exc. 351C, 351M-400) — MOR65140 MOR65375 MOR65380 MOR65390
Intake Manifold Bolt Kits Gold iridite finished, grade 8 fasteners have 3/8" 12-point heads for reduced wrenching during intake manifold instal- lation or removal. Close tolerance wash- ers are included. Part No. Description MOR38400 SB Chevy/SB Chrysler, Single Plane Manifold, Twelve 3/8"-16 x 1-1/8" MOR38410 BB Chevy, Dual Plane Manifold, Sixteen 3/8"-16 x 1-1/4" MOR38420 BB Chevy, Single Plane Manifold, Twelve 3/8"-16 x 1-1/4" And Four 3/8"-16 x 1-3/4"
Offset Cylinder Head Dowels Offset Dowels reposition the cylinder heads upward to move the valves away from the cylinder wall for improved intake flow. Four dowels per kit. Part No. Description MOR37900 BB Chevy/BB Chrysler, .030" Offset MOR37920 SB Chevy/SB Chrysler, .015" Offset MOR37930 SB Chevy/SB Chrysler, .030" Offset Chevy Timing Cover Bolts MOR38590 Fasteners have a serrated washer face to prevent loosening. Cadmium plated grade 8, 1/4"-20 bolts fit small and big block Chevys. Pack of ten. Oil Pan Stud Kits seal. Each kit includes grade 8 heat treated studs and lock nuts with attached washers and serrated faces for positive retention. Part No. Description MOR38350 Oil Pan Stud Kit, BB Chevy/Pontiac, 20 Pcs. MOR38361 Oil Pan Stud Kit, BB Chevy Race Pans, 18 Pcs. Oil Pan Bolt Kits Cadmium plated, grade 8 oil pan bolts have serrated washer faces to prevent loosening. Part No. Description MOR38550 header bolts feature small, 7/16" hex heads for eased header installation or removal. Bolts are 3/8"-16 x 3/4" long and fit most small and big block Chevy, and small block Ford. Pack of 16. Flywheel/Flexplate Bolts High quality grade 8 bolts include washers, are heat treated and black oxide coated. Part No. Description MOR38755* Stud kits ease oil pan installa- tion and help insure a leak-free Oil Pan Stud Kit, SB Chevy/Olds, 18 Pcs. MOR38360 MOR38555 MOR38560 Header Bolts MOR38710 Black oxide finished, grade 8 quality
90° Fitting, 3/8" NPT To 1/2" Hose, One Per Pkg. 90° Fitting, 3/8" NPT to 3/8" Hose, One Per Pkg. Straight Fitting, 1/4" NPT to 3/8" Hose, One Per Pkg. Straight Fitting, 3/8" NPT to 3/8" Hose, Two Per Pkg. Straight Fitting, 3/8" NPT to 1/2" Hose, Two Per Pkg.
MOR65310
MOR38350
Black Anodized Billet Aluminum
MOR65395 MOR65396
SB Chevy/Oldsmobile, Use With One-Piece Gasket, 18 Pcs. SB Chevy/Oldsmobile, Use With Multi-Piece Gasket, 18 Pcs.
BB Chevy/Pontiac, 22 Pcs.
MOR60460
MOR38755
Grade 8, gold iridite plated balancer bolt is 7/16"-20 x 2-1/4" long with an extra thick hex head for increased socket engage- ment and easier engine rotation.
Chevy Flywheel Bolts, 12-Point 7/16"-20 x 1", 6 Bolts And Washers
MOR38760 Chevy Flexplate Bolts, 7/16"-20 x 3/4", 6 Bolts And Washers * Designed for use on flywheels with a countersunk crankshaft flange.
449
Made with FlippingBook flipbook maker