Supercharger Coolant Tanks Lightweight fabricated aluminum
Manifold Filler Neck Kits Raises filler neck on Chevy engines with the intake manifold above the top of the radiator. Filler neck includes 1/2" and 1/4" NPT ports to accept temperature gauge sending units or return lines. Necks are 3-1/4" tall and include standard filler neck, gaskets and hardware. Choose from cast aluminum or billet, black anodized construction. Part No. Description MOR63420 Cast Aluminum Filler Neck Kit MOR63424 Billet Aluminum Filler Neck Kit Replacement Components MOR63422 Billet Aluminum Neck Only, Black Anodized MOR63423 Cast Aluminum Neck Only, Natural Finish MOR63465 Stamped Aluminum Filler Only, Natural Finish MOR63468 Billet Aluminum Filler Only, Black Anodized
tanks directly replace the OEM tanks found in supercharged Mustangs. Tanks may be packed with ice for im- proved horsepower and elapsed times. May be polished, chromed or powder coated, if desired. Part No. Description MOR63493 2007-12 Ford Mustang GT500 MOR63494 2005-14 Ford Mustang MOR63495 1996-04 Ford Mustang MOR63496 Ford Mustang/Roush Supercharged Subaru Intercooler Tank MOR63784
Direct, bolt-in replacement Intercooler Tank is manufactured from fabricated aluminum and features 50% more capacity when compared to the OEM tank. Tank is complete with billet filler neck, billet hose
Bolt-On Stamped Aluminum MOR63465
Fits Chevy manifold or Moroso MOR63420 filler neck kit. Black anodized aluminum neck uses standard radiator cap.
fittings and racing radiator cap with stock pres- sure rating. Fits all 2002-07 Subaru WRX/STI. Aluminum Crankshaft And Alternator Pulleys
Bolt-On Billet Aluminum MOR63466
Heavy duty neck fits small and big block Chevy intakes. Includes screw-in 1/8" NPT hose fitting for expansion tanks and accepts standard cap. Water Neck Bleeder Kits Quickly remove air from the highest point in the cooling system. Part No. Description MOR63430 Cast Aluminum Bleeder Kit MOR63432 Bleeder Plate Only Bolt-On Block-Off Plate MOR63471 Untreated aluminum block-off plate is 1/4" thick and is easily drilled or welded. Use to custom fabricate water outlets. Weld-On Billet Aluminum Filler Neck MOR63486 Use where a heavy duty, custom cap is needed. Includes screw-in 1/8" NPT hose fit- ting for expansion tanks and accepts standard cap. Coolant Expansion Tanks Direct, bolt-in replacements for OEM plastic tanks on late model muscle cars. Fabricated aluminum tanks have increased capacities, built-in overflow expansion reser- voirs, billet filler necks and fittings. Part No. Description MOR63497 2005-Up Dodge Challenger/Charger/Magnum; Chrysler 300C, (2) P/S Tab Locations MOR63767 1996-04 Ford Mustang MOR63768 2005-10 Ford Mustang MOR63783 2011-Up Ford Mustang GT & V6 MOR63786 1986-93 Ford Mustang MOR63787 1997-04 Chevrolet Corvette
MOR64050
MOR64060
MOR64110
MOR64120
MOR64210
V-belt pulleys are machined with extra-deep grooves for improved belt retention. Smaller crank pulley diameter slows fan, water pump and alternator for less horsepower draw. Large alternator pulley reduces alternator speed. Use 36° x 17/32" belt. Part No. Description Single Groove, Pre-1969, Short Water Pump, 5.25" OD, 30% Red. MOR64060 Double Groove, Pre-1969, Short Water Pump, 5.40" OD, 25% Red. MOR64070 Single Groove, Pre-1969, Short Water Pump, 4.00" OD, 50% Red. MOR64100 Single Groove, 1969-Up, Long Water Pump, 4.00" OD, 50% Red. MOR64110 Double Groove, 1969-Up, Long Water Pump, 4.04" OD, 50% Red. MOR64120 Single Groove, 1969-Up, Long Water Pump, 4.95" OD, 30% Red. Big Block Chevy MOR64200 Single Groove, Pre-1969, Short Water Pump, 5.25" OD, 30% Red. MOR64210 Double Groove, Pre-1969, Short Water Pump, 5.40" OD, 25% Red. Ford 351C, 351M-400, Boss 302 MOR64550 Double Groove, 4-Bolt Dampers, 4.00" OD Big Block Chrysler 383-440 MOR64700 Single Groove, Pre-1972 With Std. Damp., 5.00" OD, 30% Red. Alternator Pulley MOR64800 GM/Ford, Single Groove, 5.00" OD Crankshaft Pulleys Small Block Chevy MOR64031 Crank Pulley Shim Kit MOR64050
MOR63430
MIKE FINNEY
451
Made with FlippingBook flipbook maker