ENGINE
SB Chevy Gaskets
Engine Covers Covers protect engines during storage or transport. 1/8" thick polycarbonate mate- rial is formed to fit most small block Chevy applications. Short block cover fastens over cylinder head alignment dowels. Manifold cover is designed to replace manifolds with stock port locations and bolt pattern. Part No. Description ALL96530 Short Block Cover ALL96532 Manifold Valley Cover
ALL87210
ALL87212
ALL87214
ALL87216
ALL96530
ALL87220
ALL87230
ALL87232
Part No. ALL87210
Description
Valve Cover, 5/16" Thick (Cork), Pair ALL87212 Valve Cover, 5/16" Thick With Steel Core (Cork), Pair ALL87214 Valve Cover, 5/16" Thick With Steel Core, (Black Coated), Pair ALL87216 Valve Cover, 3/16" Thick With Steel Core Vortec Centerbolt (Black Coated), Pair ALL87220 Oil Pan Set, 1955-85* ALL87230 Water Pump To Block Set ALL87230-10 Water Pump To Block, 10-Pack ALL87231 Thermostat Housing
ALL96532
ALL87236
Motor Plates Motor plates are used to replace the front
ALL38120
motor mounts allowing relocation of the engine in the chassis, including lowering or when moving the engine back in the chassis. Plates prevent engine movement and reinforce the front suspension for better handling and increased reaction times. Fabricated from 1/4" thick 6061-T6 aluminum, motor plates are often trimmed to fit the chassis or frame mounts. Plates are machined for a perfect fit to mount between the water pump and engine block. Part No. Description ALL38120 SB Chevy 10" x 36" ALL38124 BB Chevy 12" x 36" Universal Engine Mid-Plates
ALL87238
ALL87240
ALL87231-10 Thermostat Housing, 10-Pack ALL87232 Thermostat Housing - With Steel Core (Cork) ALL87232-10 Thermostat Housing - With Steel Core (Cork), 10-Pack ALL87236 Fuel Pump ALL87236-10 Fuel Pump, 10-Pack ALL87238 Fuel Pump Plate ALL87238-10 Fuel Pump Plate, 10-Pack ALL87240 Front Of Engine Set ALL87250 Distributor Gasket ALL87250-10 Distributor Gasket, 10-Pack *This set fits 1955-85 engines. Includes gaskets to work with LH or RH dipstick, and front pan seals (both thick and thin). Carburetor Gaskets ALL87250
Universal plates are posi- tioned between the engine and transmission to provide a mid-engine mounting location and help stiffen the chassis. These mid-plates are great for drag racing and street applications, allow-
ing easier engine or transmission removal and installation into almost any chassis. Plates fit most Chevy V-8’s and measure 15” H. x 29” W. Part No. Description ALL38121 Steel (.090”) ALL38122 Aluminum (.250”)
ALL87206
ALL87202
ALL87200
Part No. ALL87200 ALL87202 ALL87204 ALL87206
Description 4150 Open 4150 4-Hole
Bellhousing Dowel Pins Steel dowel pins are approximately 1/2" longer than stock pins and are re- quired when running an engine mid-plate, rear motor mounts or an aftermarket bellhous-
ALL87204
4412 2-Hole, 2BBL
4500 Open, Dominator SB Chevy Header Gaskets Durable reinforced steel core and graphite composite gaskets remain soft and pliable to conform to header and head surfaces providing an excel- lent, long lasting seal. Sold each. Part No. Description ALL87260 1-5/8" Square Port (Stock) ALL87262 1-3/4" D-Port (Standard) ALL87264 Spread Port (Staggered Bolt Pattern) ALL87266 Crate Engines (Non LS / Fast Burn) ALL87268 LS Series Engines (Excluding LS7)
ALL38152
ALL87262
ing. These extended length pins also help with alignment when installing an engine. Pins fit most GM blocks and are sold in pairs. Part No. Description ALL38150 Solid Pins ALL38152 Hollow Pins
ALL87264
ALL87266
45
Made with FlippingBook flipbook maker