RBF 600 Racing Brake Fluid A DOT 4, 100% synthetic, non-silicone that endures the high temperatures common to racing brake and clutch systems. RBF 600 has a dry boiling point of 593°F, superior to DOT 5 silicone fluids. Viscosity is lower than DOT 3 and DOT 4 fluids, allowing easier fluid circulation in micro-valves and anti-lock systems.
1/2 Liter Bottle
1 Case (12) 1/2 Liter Bottles
Description
RBF 600 MTL100949-12 Note: Do not mix with silicone (DOT 5 silicone base) or mineral base fluids (LHM). MTL100949
Full Spools Precision machined and heat treated, Motive Gear full spools offer reduced gear deflection and weight. Choose from standard or lightweight units. Not for street use. Part No. Description MOTFS10-28 GM 8.5" 10-Bolt, 28-Spline MOTFS10-30 GM 8.5" 10-Bolt, 30-Spline MOTFS12-30 GM 8.875" 12-Bolt, 30-Spline, Passenger Only MOTFS8.8-31 Ford 8.8", 31-Spline MOTFS9-28LW Ford 9", 28-Spline, Lightweight MOTFS9-31LW* Ford 9", 31-Spline, Lightweight * Requires 3.062" bore housing. Spool Bearing Kits Kit includes one pair of premium Timken spool bearings. Part No. Description MOTCK12C GM 8.875" 12-Bolt MOTCK9-289 Ford 9", 2.891" Housing “Pro” Drag Racing Ring And Pinion Sets Specifically engineered for drag racing only, 9310 steel “Pro” gear sets are EuroFuture heat treated for maximum durability. Not for street use. Part No. Ratio Teeth Ford 9", 28-Spline, 1.313" (Small) Dia. Pinion MOTF990429SP 4.29 30-7 MOTF990514SP 5.14 36-7 MOTF990529SP 5.29 37-7 MOTF990543SP 5.43 38-8 Ford 9", 35-Spline, 1.500" (Large) Dia. Pinion MOTF990370BP 3.70 37-10 MOTF990389BP 3.89 35-9 MOTF990411BP 4.11 37-9 MOTF990429BP 4.29 30-7 MOTF995456BP 4.56 41-9 Mini Installation Kits Includes all of the components necessary to properly install a new ring and pinion. Includes pinion and carrier shims, pinion nut, ring gear bolts, gear marking compound, pinion seal, crush sleeve, brush and cover gasket or RTV. Part No. Description MOTF8.8IK Ford 8.8" MOTF9IK Ford 9", 28-Spline MOTGM12IKC GM 12-Bolt 8.875" MOTGM8.5IK GM 10-Bolt 8.50"
Performance Ring And Pinion Sets Choose from standard or lightweight “AX” ring and pinion sets. Standard Part No. “AX” Part No. Ratio Teeth Chrysler 8.75", Early “742” Housing, 1.75" Dia. Pinion MOTC887391E — 3.91 48-11 Chrysler 8.75", Late “489” Housing, 1.875" Dia. Pinion MOTC887391L — 3.91 48-11 MOTC887410L — 4.10 41-10 Ford 8.8", 30-Spline, 1.626" Dia. Pinion MOTF888390 — 3.90 43-11 MOTF888410 — 4.10 41-10 MOTF888456 — 4.56 41-9 MOTF888514 — 5.14 36-7 Ford 9", 28-Spline, 1.313" Dia. Pinion MOTF890411 — 4.11 37-9 MOTF890430 — 4.30 43-10 MOTF890457 — 4.57 32-7 MOTF890486 — 4.86 34-7 MOTF890514 — 5.14 36-7 MOTF890529 MOTF890529AX 5.29 37-7 — MOTF890537AX 5.37 43-8 MOTF890543 MOTF890543AX 5.43 38-7 — MOTF890557AX 5.57 39-7 — MOTF890567AX 5.67 34-4 MOTF890583 MOTF890583AX 5.83 35-6 MOTF890600 MOTF890600AX 6.00 36-6 — MOTF890614AX 6.14 43-7 MOTF890620 MOTF890620AX 6.20 31-5 MOTF890633 MOTF890633AX 6.33 38-6 MOTF890650 MOTF890650AX 6.50 39-6 GM 7.5"/7.625" 10-Bolt, 27-Spline, 1.438" Dia. Pinion MOTG875390 — 3.90 43-11 MOTG875410 — 4.10 41-10 MOTG875456 — 4.56 41-9 GM 8.2" 10-Bolt, 27-Spline, 1.438" Dia. Pinion MOTG882411 — 4.11 37-9 GM 8.5" 10-Bolt, 30-Spline, 1.626" Dia. Pinion MOTG885410 — 4.10 41-10 MOTG885456 — 4.56 41-9 GM 8.875" 12-Bolt, 30-Spline, 1.625" Dia. Pinion MOTG888390 — 3.90 39-10 MOTG888411 — 4.10 41-10 GM 2010-12 Chevrolet Camaro MOTG886391 — 3.91 39-10 GM 2004-06 Pontiac GTO MOTG80390 — 3.90 39-10
Differential Master Bearing Kits Kit includes everything to overhaul a differential; pinion bearings and shims, pinion seal, carrier bearings and shims, pilot bearing (where applicable), gear marking compound and brush, crush sleeve, pinion nut, loctite, cover gasket/RTV and ring gear bolts. Part No. Application MOTR8.75RLMK Chrysler 8.75", “489” Housing, 1.875" Pinion, 1969-74 MOTR8.75RMMK Chrysler 8.75", “741” Housing, 1.375" Pinion, 1957-68 MOTRA29RMK Dana 60 9.75", 29-Spline 1.626" Pinion, 1950-97 MOTR8.75ERMK Chrysler 8.75", “742” Housing, 1.750" Pinion, 1957-68 MOTRA310RMK Ford 8", 25-Spline, 1.188" Pinion, 1964-80 MOTR8.8RMK Ford 8.8", 30-Spline, 1.626" Pinion, 1981-Up Exc. IRS MOTR9RMK † Ford 9", 28-Spline, 2.891" Housing, 1957-86 MOTR9R28MK* Ford 9", 28-Spline, 2.891" Housing, Late Model * With LM501310 and LM501349 bearings. † With LM102910 and LM102949 bearings.** Super Master Bearing Kit includes the addition of axle seals and bearings. Part No. Application MOTR10RVLMKT 1997-13 Corvette, 10-Bolt, 8.25” Ring Gear NEW! MOTR10RVMKT 1963-79 Corvette, 10-Bolt, 8.5” Ring Gear NEW! MOTR10CRMK GM 8.2" 10-Bolt, 27-Spline, 1.438" Pinion, Chevy MOTR8.5PRMK GM 8.2" 10-Bolt, 27-Spline, 1.438" Pinion, B.O.P MOTR10REMK GM 8.5" 10-Bolt, 30-Spline, 1.626" Pinion, 1970-99 MOTR10RLMK GM 8.5" 10-Bolt, 30-Spline, 1.626" Pinion, 1999-Up MOTR12CRMK GM 12-Bolt 8.875", 30-Spline, 1.625" Pinion, 1964-72 MOTR12CRSK** GM 12-Bolt 8.875”, 30-Spline, 1.625” Pinion, 1964-72 NEW!
461
Made with FlippingBook flipbook maker