ENGINE
Chevrolet/GM V8 Engine Conversion Kits
Chevy Motor Mounts Front Motor Mounts Available in centered, 1", 2" or 3-3/8" offsets. Part No. Description ALL38100 Centered, Sold Each ALL38108 1" Offset, Pair ALL38109 2" Offset, Pair ALL38110 3-3/8" Offset, Pair
ALL38100
ALL38109
GM Motor Mount Kit ALL38082
Bolt-in steel mounts for GM metric chassis bolt to crossmember and accept Allstar steel motor mounts (ALL38100). A “captured” 1/2"- 13 nut eases engine installation. Sold in pairs. Ford Motor Mounts Steel mounts have been updated and now fit the newer and original 302-351W small blocks. Sold in pairs. Part No. Description
ALL38251
Conversion kits are a good starting point when installing a small block Chevy/TH350 transmission combination into most 1982-up S-10, S-15, Jimmy or Blazer. Additional components and fabrica- tion will be required depending on engine and application. ALL38250 Conversion Kit 2WD Kit Includes: • Engine Mount Set • Engine Mounts • Headers ALL38251 Conversion Kit 2WD Kit Includes: • Engine Mount Set • Engine Mounts
ALL38112 Rear Motor Mounts ALL38113 Front Motor Mounts
ALL38113
Chevy Solid Motor Mount ALL38080 Solid motor mount is 1/4" thick steel and replaces
• Headers • Radiator Ford V8 Engine Conversion Kit ALL38200
stock Chevy rubber mount to eliminate torque loss and prevent engine movement. Sold each. Chevy Motor Mount Pads ALL38090 Steel pads are 1/4" thick and tradition- ally used as shims to gain extra oil pan or header clearance. May also be used for building custom motor mounts or engine stands. Sold in pairs. GM Motor Mount ALL38114 Replacement stock mount for most GM engines. Mount bolts to chassis. Fits: 1970-88 Monte Carlo 1973-87 Cutlass 1970-87 El Camino 1974-83 Malibu 1971-92 Camaro 1970-79 Nova 1977-87 Regal 1970-85 Impala 1970-73 Chevelle GM Motor Mount ALL38115 Replacement rubber mount for Allstar S-10 conversion kit. Mount bolts to chassis. Ford Motor Mount ALL38116 Replacement rubber mount for Allstar Ford Ranger V8 conversion kit. Mount bolts to the engine.
Conversion kits are a good starting point when installing a 289 - 302 with a C-4 transmission combination into a 1982-97 Ranger 2WD. Additional components and fabrication will be required depending on engine and application. Kit Includes: • Engine Mount Adapter Set • Filter Adapter
• Radiator • Headers • Oil Pump Pick-Up Tube • Oil Pan
46
Made with FlippingBook flipbook maker