Trunk Mounted Battery Installation Kit MRG6279
Carburetor Studs Zinc plated studs help prevent stripped threads in aluminum intake manifolds. Holds the gasket in place to ease carb installation. Threaded 5/16"- 18 at one end and 5/16"-24 at the opposite end. Includes four studs, nuts and washers. Part No. Description MRG59 Standard 1-3/8" Length MRG60 Medium 1-1/2" Length MRG61 Long 2" Length MRG62 Extra Long 2-1/2" Length Harmonic Balancer Bolt And Washer Kits Heat treated, Grade 8 bolts have high hex head to prevent socket slippage when rotating the engine, while degreeing the cam or setting the valves. An extra thick, parallel ground washer provides more uniform torque. Includes split lock washer. Offered with black oxide or gold zinc dichromate finish. Valve Cover Stud Kits Bullet tip helps locate valve cover gaskets and eases nut installation. Studs are black oxide and hex nuts are cadmium plated to resist corrosion. Part No. Description MRG6324 Sure-Lock Rocker Arm Nuts 16 heat treated, plated steel rocker arm nuts prevent loose rocker arms and include socket head set screws, and a hex key wrench. Part No. Application Stock Rocker Arms MRG920G SBC 262-400, SB Ford 289-351W, Pontiac Aluminum Roller Rocker Arms MRG923G SBC 262-400, SB Ford 289-351W, Pontiac Intake Manifold Bolts Zinc plated bolts are sold complete with large flat washers, which provide uniform clamping with aluminum intake manifolds. Choose from grade 5 hex head, grade 5 socket head or grade 8 12-point bolts. Part No. Description Hex Head Grade 5 MRG954G 1/4"-20/28 x 1-1/8" Long, 8 Pcs. 1/4"-20/28 x 1-1/2" Long, 8 Pcs. MRG6329 .603" .540" .544" MRG924G BBC 396-454, Pontiac, HD Description Gold Zinc Part No. SB Chevy 265-400, 7/16"-20 x 2-1/4" BB Chevy 396-454, 1/2"-20 x 1-1/2" Ford, All V-8 Exc. 351C, 5/8"-18 x 2"
Improve traction by relocating the battery to the trunk. Battery box is 12" L. x 6-3/4" W. x 10" H. and made of molded polyethylene. Kit also includes hold down brackets, 20 ft. of 4-gauge stranded copper battery cable, (4)
MRG59
terminal ends, (2) battery cable ends, and installation hardware. Accommodates batteries up to 12" in length. Box and cable are also available separately. Grommet Set MRG3706
Assortment of 30 grommets are useful when running wires, cables or hoses through sheet metal. Includes six grommets each in 1/2", 5/8", 3/4", 7/8" and 1" sizes. Tire Screw Kit MRG4318 Prevent slicks from spinning on the rim when running low tire pressure. Kit includes 35 Grade 8, #14 x 3/4" hex head screws and drill bit. Wheel Spacers
Black Oxide Part No.
MRG945G MRG7845 MRG946G MRG7846 — MRG7847
Die cast aluminum spacers will increase disc brake clearance and compensate for insufficient wheel backspacing. Compatible with 5 x 4-1/2", 5 x 4-3/4" and 5 x 5" bolt patterns. Sold in pairs. Part No. Description MRG2370 7/32" Thick MRG2371 5/16" Thick MRG2372 7/16" Thick
Note: Longer studs and/or extended lug nuts are often required to meet NHRA/IHRA rules regarding proper lug nut/stud engagement.
Competition Open End Lug Nuts Chrome plated, open end lug nuts are required when running long wheel studs. Sold five to a pack, and available for most popular drag rims. Part No. Description MRG4301G 1/2" With 3/4" Shank MRG4303G 1/2" With 1 3/8" Shank MRG4305 1/2" With 1" Shank MRG1745 Mag Wheel Lug Nut Washers, 5/8" ID x 1.00" OD x 1/16" Thick, 10-Pack Competition Wheel Studs Grade 8 press-in wheel studs are extra long for com- petition use and are plated for corrosion resistance. Use with open end lug nuts. NHRA/IHRA approved. 10 per set. MRG4301G
Shank OD
Stud
3/8"
3/8" 7/16"
MRG4310G
Stud Dia. Knurl
Drill Hole
Part No.
Description
MRG4310G .480" .469" MRG4311 1/2"-20 x 2-7/8", Chrysler, Ford Most With 1/2" Studs .665" .641" 7/16"-20 x 2-5/8", 1963-75 Chevy
3/8"-16 x 1-1/4", 16 Bolts And Washers, Fits BB Chevy 3/8"-16 x 1", 12 Bolts And Washers, Fits SB Chevy/Chrysler/AMC 5/16"-18 x 2", 12 Bolts And Washers, Fits SB Ford 3/8"-16 x 1", 12 Bolts And Washers, Fits SB Chevy/Chrysler/AMC 3/8"-16 x 1-1/4", 16 Bolts And Washers, Fits BB Chevy
MRG955G MRG958G
Bullet Tip Carburetor Stud Kits Studs have a 3/16" hex bullet tip for easy installation and prevention of cross-thread-
Socket Head Grade 5 MRG956G 12-Point Head Grade 8 MRG6091 MRG957G
MRG6345G
ing. Studs are black oxide and hex nuts are cadmium plated to resist corrosion. Sold in sets of four, with hex nuts and washers. Part No. Description MRG6345G Carburetor Stud Kit, 5/16"-18 x 1-1/2" Long MRG6346G Carburetor Stud Kit, 5/16"-18 x 2" Long
3/8"-16 x 1", 12 Bolts And Washers, Fits SB Chevy/Chrysler/AMC MRG6093 3/8"-16 x 1-3/4", 4 Bolts And Washers, 3/8"-16 x 1-1/4", 12 Bolts And Washers, Fits BB Chevy, Single Plane Manifolds
469
Made with FlippingBook flipbook maker