AIR CLEANERS AND ACCESSORIES
2BBL Air Cleaner Base ALL26081 Aluminum air cleaner base has 14" overall diameter. 5/8" drop, plain finish. 3" diameter carburetor flange. Air Cleaner Adapter ALL26080
Air Cleaner Hold Down Seal Hold down seal prevents dirt from collecting in the “cup” of the air cleaner lid, which can fall into the carburetor causing major engine damage. This is specially designed to fit Allstar aluminum air cleaner lids. Available to fit 1/4" or 5/16" carburetor studs. Part No. Description ALL26050 1/4"-20 Threads ALL26051 5/16"-18 Threads O-Ring Carb Nuts
Use the more readily available 4bbl. air cleaner on a Rochester 2bbl. carburetor. Accessorize with aftermar- ket air cleaner and retain stock 2bbl. carburetor and intake. Racing classes using a 2bbl. can benefit from the higher flow of a 4bbl. air cleaner. Made of high strength ABS plastic. Adapter has a 3" I.D. and a 5-1/8" O.D.
Seal air cleaner and eliminate us- ing a wrench to remove air cleaner assembly. Black aluminum nuts have a grooved pattern for non-slip grip. Part No. Description Short Nut - 5/8" Tall ALL26046 1/4"-20 Thread ALL26048 5/16"-18 Thread Air Cleaner Studs Straight and offset studs (for use with Allstar offset base air cleaners) are 6" long with 1/4"-20 threads and a wing nut. ALL26056 also has an adapter for carbs with 5/16"-18 threads. ALL26057 has a 1-1/2" offset. Part No. ALL26045 1/4"-20 Thread ALL26047 5/16"-18 Thread Tall Nut - 1-1/4" Tall
Paper Air Filter Elements High performance paper air filter elements increase air flow. Part No. Description ALL26020 14" x 3" ALL26021 14" x 3.5" ALL26022 14" x 4" ALL26023 14" x 5" ALL26028 16" x 3" ALL26029 16" x 3.5" ALL26030 16" x 4" Washable Air Filter Elements Washable air filter elements offer bet- ter engine protection and increase air flow for more power and torque. After cleaning, elements may be re-used. Ele- ments are pre-oiled and available in four heights. Part No. Description ALL26000 14" x 3" ALL26002 14" x 4" ALL26004 14" x 5" ALL26006 14" x 6" Air Cleaner Top Element ALL26010 Filter cleaning station simplifies and speeds up the process of servicing 14" washable air filters. Spray air filter with a cleaner/degreaser as recommended by filter manufacturer, allow a brief time to soak then flush clean with a garden hose. Allow filter to dry completely then apply an even applica- tion of filter oil, if applicable. For use with washable filter elements only. Air Filter Cleaner ALL78222 Spray solution directly onto dirty air filter. Allow a brief time to soak, 5-10 minutes then rinse clean with water. For use with Allstar washable air filter ele- ments. Plastic 24 oz. bottle.
ALL26045
ALL26046
ALL26057
ALL26056
ALL26058
Description
ALL26056 ALL26057 ALL26058
Straight Stud With Adapter Offset Stud, 1/4" x 6" Adapter, 1/4" To 5/16"
Carb Hats Carburetor hats are ideal to cover open carbs and prevent debris from falling into the engine while working in garage or pit area while the air cleaner is removed. 2-1/2" tall carb hats are designed to fit most carbs or throttle bodies with a 5-1/8" diameter neck. Part No.
Unique 14" dia. element replaces traditional metal lid to increase air flow for more horsepower and torque. Washable element may be cleaned and used over and over. Top element is pre-oiled and ready for installation. Filter Cleaning Station ALL26009
ALL26040
ALL26042
ALL26043
ALL26044
Description
ALL26040 ALL26042 ALL26043
Plastic Carb Hat
Plastic Carb Hat With Screen, Use When Adjusting Valves
Aluminum Carb Hat, Standard Spun Aluminum ALL26044 Aluminum Carb Hat, Deluxe Machined Aluminum With Sealing O-Ring Note: Hats will not clear choke linkage or shaft on Holley style carbs but will clear choke horn with choke linkage and shaft removed.
Dominator Carb Hat ALL26041 Plastic carb hat is 2-3/8" tall and fits over the 7-1/4" air cleaner opening of Holley Dominator carburetors to prevent water or debris from entering the engine. Solid cover may be drilled when an air cleaner stud is used.
4
Made with FlippingBook flipbook maker