R4 Single-Stage Wet Sump Pumps
R4 Fittings Engineered exclusively for use with R4 pumps, fittings are CNC-machined from billet
Designed for wet sump applications, oil pumps incorporate a four lobe aluminum rotor design for superior oil pressure, at both idle and high RPMs. Part No. Description Mount Pressure
aluminum and red anodized for corrosion resistance. Shallow depth, screw-in design reduces weight, while easing plumbing. Part No. Description PTR14-0010 -10AN PTR14-0012 -12AN PTR14-0016 -16AN PTR14-0020 -20AN
Pressure Rotors
PTR04-1002 Single-Stage Left Side PTR04-1020 Single-Stage Right Side
Standard Standard
1.200" 1.200" 1.400"
PTR04-1022 Single-Stage Right Side High Volume
R4 Dry Sump Pumps The R4 dry sump oil pump utilizes a modular design and an innovative, twisted lobe ro- tor design, which allows using aluminum rotors for reduced weight and performance. The
Ball Retention Bolt PTR05-0395 Ball pulley retention bolt provides an easy method to prime the dry sump pump. Bolt is 1/4"-20 and fits Peterson pumps. Remote Relief Valve Special, remote relief valve allows oil pres- sure to be adjusted on applications where rules require the oil pump be in the stock location. May also be used with a dry sump to make the pressure regulator more accessible. Part No. Description PTR09-0160
internal scavenge manifold and shallow depth, screw-in fittings provide an exceptional- ly low profile. Pumps are well suited to a wide variety of applica- tions. Pumps are offered in 3-, 4- and 5 stage versions.
Pressure Rotors
Scavenge Rotors
Part No.
Description Mount
Pressure Standard
Remote Relief Valve, -10AN Fittings
PTR04-3000 3-Stage PTR04-3020 3-Stage PTR04-4000 4-Stage PTR04-4020 4-Stage PTR04-5000 5-Stage PTR04-5060 5-Stage
Left Side Right Side Left Side Right Side Left Side Left Side
1.200"
1.200" 1.200" 1.200" 1.200" 1.200" 1.400"
PTR09-0161
Remote Relief Valve, -12AN Oil Fittings, -10AN Relief Line Fitting
Standard 1.200" Standard 1.200" Standard 1.200" Standard 1.200" Standard 1.200"
Spline Drive Sets Spline drive mandrel provides a positive drive and is fully compat- ible with accessory drives that use Gilmer, HTD or V-belts. Lightweight, billet aluminum construction 3-bolt spline drive hubs are engineered for engines fitted with an ATI Super Damper and MSD crank trigger. Part No.
R4 Mounts Mounting blocks include the innovative tab mounting system common to R4 pumps, which provides reduced weight. Each mount is sold complete with hardware. Description Left Side Part No.
Description
Right Side Part No.
PTR06-4111 PTR06-4112 PTR06-4113
Small Block Chevy, ATI/MSD Big Block Chevy, ATI/MSD Small Block Ford, ATI/MSD
SB Chevy 265-400 BB Chevy 396-454 SB Ford 289-351W
PTR14-3100-001 PTR14-3120-001
—
PTR14-3121-001 PTR14-3201-001
—
Stack Adapter PTR06-0720 Engineered for use with spline drives, stack adapter includes a 2.250" O.D. guide washer. Hub And Cap Guide Washers Part No. Description PTR06-0711 Guide Washer, 2.250" Dia.,
R4 Replacement Oil Pump Seal PTR14-2502 Replacement PTFE seal is designed for use with Peterson R4 series oil pumps.
For 18-21 Tooth HTD And 14-17 Tooth Gilmer Pulleys Guide Washer, 2.750" Dia., For 22-25 Tooth HTD And 18-21 Tooth Gilmer Pulleys
PTR06-0712
LARRY MAIN
PAUL STEWART
502
Made with FlippingBook flipbook maker