Lightweight Cap And Bung Assemblies
Y-Manifolds When multiple oil lines need to be combined in a single high flow line, the tubular or billet aluminum Y-manifolds gets the job done. Part No.
Billet aluminum cap and bung assemblies are useful when fabricating custom tanks. Cap is anodized red. Part No. Description PTR08-0611 Oil Filter Block Off Plates Oil filter block off plates facilitate the instal- lation of wet and dry sump oil pressure lines to the stock oil filter pad. Plates are made from aluminum billet and include mounting hardware. Part No. Description PTR09-0002 PTR08-0621
PTR10-0033
PTR10-1725
Description
Cap And Bung Assembly, 1-7/16" Dia. Cap And Bung Assembly, 3" Dia.
PTR10-0030 PTR10-0033 PTR10-0041
Billet Aluminum Y-Manifold, -6, -6, -6 Billet Aluminum Y-Manifold, -10, -8, -8
Billet Aluminum 4-Way Manifold, -8, -6, -6, -6 PTR10-0070 Billet Aluminum 5-Way Manifold, -10AN x -8AN x -8AN x -8AN x -8AN PTR10-0080 Billet Aluminum 5-Way Manifold, -12AN x -8AN x -8AN x -8AN x -8AN PTR10-1721 Aluminum Tube Y-Manifold, -12, -12, -12 PTR10-1725 Aluminum Tube Y-Manifold, -16, -12, -12
In-Line Temp Port Assembly In-line temperature sender fitting assembly has a standard 5/8"-18 threaded port for a temperature probe. Part No. Description PTR09-1940
Early Chevy V-8, -12AN Fitting With (1) 3/8"-16 Bolt Mount PTR09-0004 Chevy Bow Tie Block, -12AN Fitting With (2) 5/16"-18 Bolts Mount PTR09-0011 Ford V-8 With -12AN Fitting PTR09-0020 Replacement Square O-Ring For PTR09-0001 Thru PTR09-0004 Water Neck Riser Block Peterson’s riser blocks are available with two AN ports to accommodate circulation of the water to the cylinder heads via -6AN or -8AN lines. A model with a water temperature sender port is also available. An O-ring seal is provided on the flange. Part No. Description PTR10-2250 1" Thick Plain Riser, Accepts Thermostat PTR10-2251 1" Thick Riser, Two -6AN Ports PTR10-2252 1" Thick Riser, Two -6AN Ports With Water Temp. Sender Port PTR10-2256 1-1/4" Thick Riser, Two -8AN Ports Screw-In Breather PTR08-0415 Internally baffled breather has -12AN male threads to fit bung on Peterson dry sump tanks. May also be used on valve covers.
-10AN Nose x -10AN Nose -12AN Nose x -12AN Nose
PTR09-1960
Oil Pressure Gauge Fittings Special fittings, designed by Karl
Kinser, gets the oil pressure gauge line up where it is more accessible. Fitting is 1/8" NPT on engine end, while the gauge connec- tion is -4AN. Part No. Description PTR15-1040 Oil Pressure Gauge Fitting, 90° PTR15-1041 Oil Pressure Gauge Fitting, Straight SB Chevy Manifold End Rail Spacers Fill the gap between the manifold and the lifter valley end rails when using raised port cylinder heads on small block Chevy engines. Sold in pairs, Spacers include four 3/16" roll pins for retention. Drilling of the block is required for installation. Part No. Description PTR09-1060 Spacer Set, .125" Thick PTR09-1061 Spacer Set, .187" Thick PTR09-1062 Spacer Set, .250" Thick PTR09-1063 Spacer Set, .375" Thick PTFE Engine Seals Hard-to-find PTFE engine seals assure maxi- mum vacuum levels for engines with dry sump oil systems. Seals are manufactured by TKO Competition Development. Part No. Description PTRSM85338 Front Crank Seal, SB Ford 302-351W
One Way Valve Pop Off PTR08-0450 Breather assembly is installed in valve cover on engine’s running crankcase in vacuum condition. Valve seals engine from air entering engine, but opens in the event of crankcase pressure, allowing crankcase to vent. Includes -12AN bung to weld to aluminum valve cover. Adjustable Vacuum Regulator PTR08-0455 Billet aluminum adjustable vacuum regulator allows regulating crankcase vacuum, which helps maximize ring seal and engine performance. Adjustable from 2-29.7 in/hg. Fuel Pressure Regulator Fittings Machined from aluminum, anodized fittings have large bores and are radiused on the inlet sides for optimum flow. Part No. Description PTR15-1002 Fuel Regulator -10AN x -8 Port PTR15-1003 Fuel Regulator -6AN x -6 Port PTR15-1004 Fuel Regulator -8AN x -8 Port
PTRSM85742 PTRSM86410 PTRSM86586 PTRSM86587 PTRSM86625 PTRSM86990
Rear Main Seal, SB Ford 351 w/302 Crank Rear Main Seal, SB Chevy 400 Jesel Front Cover, Chevy Cam Seal Jesel Front Cover, SB Chevy Crank Seal Rear Main Seal, SB Chevy 350
Front Crank Seal, SB Chevy
506
Made with FlippingBook flipbook maker