FASTENERS
Rod Ends Two-piece spherical rod ends have a pivoting steel ball and are sold each. Bore x Thread RH Male
High Misalignment Reducer Spacers
LH Male
RH Female
Strength
Standard Series Steel 1/4" x 1/4"-28
ALL58004 ALL58005 ALL58006 ALL58008 ALL58010 ALL58012 ALL58013 †
ALL58014* ALL58015*
ALL58034 2,835 Lbs ALL58035 4,517 Lbs
Dual purpose spacers reduce fastener size mounting hole and allow the rod end to rotate more than 30 degrees in each direction which is 25% more than most standard spacers. Stainless steel spacers resist rust and corrosion. Sold in pairs. Rod End Size I.D. O.D. “A” Length “B”
A
5/16" x 5/16"-24 3/8" x 3/8"-24 1/2" x 1/2"-20 5/8" x 5/8"-18 3/4" x 3/4"-16 3/4" x 3/4"-16*
ALL58016 ALL58036 6,323 Lbs ALL58018 ALL58038 10,046 Lbs ALL58020 ALL58040 15,488 Lbs ALL58022 ALL58042 15,894 Lbs — — 15,894 Lbs
B
Part No. ALL18785 ALL18786 ALL18787
Pro Series Steel (Moly) – Black 1/2" x 1/2"-20 ALL58058
5/8" 3/4" 3/4"
1/2" 1/2" 5/8"
.750" .890" .890"
.465" .475" .475"
ALL58068 ALL58069 ALL58070 ALL58072 ALL58085 ALL58086 ALL58098 ALL58099
— 17,000 Lbs — 19,300 Lbs — 18,000 Lbs — 25,000 Lbs — 17,650 Lbs — 15,200 Lbs — 21,400 Lbs — 7,700 Lbs — 15,000 Lbs
1/2" x 5/8"-18 5/8" x 5/8"-18 3/4" x 3/4"-16
ALL58059 ALL58060 ALL58062
5/8" Rod End Reducer Spacers Reducer spacers fit into 5/8" rod ends, reducing the hole size for 1/2" hardware while also spacing the rod end away from chassis brackets. Standard spacers are 3/4" O.D. and flanged spacers have 1"
Pro Series Steel (Moly) – Black (PTFE Lined) 1/2" x 5/8"-18 ALL58079 ALL58084
5/8" x 5/8"-18 3/4" x 3/4"-16
ALL58080 ALL58082 ALL58088 ALL58089
Aluminum – Black 1/2" x 1/2"-20
ALL18615
ALL18612
1/2" x 5/8"-18
O.D. flanges to help support rod end. Size referenced indicates the amount of space between rod end pivot ball and chassis bracket. Package of 2.
* NEW! † ALL58013 has an oversized hole and is for use with steering shaft tubing.
Heavy Duty 3/4" Chrome Moly Rod Ends
Standard Spacers Part No.
Description
Heavy duty or often referred to as “Aircraft Style”, these 4130 chrome moly rod ends have larger bodies which make them thirty percent stronger than standard 3/4" rod ends. These rod ends are commonly used on panhard bars and lower strut rods. Part No. Description ALL99314 RH Male, 3/4" x 3/4"-16 ALL99315 RH Female, 3/4" x 3/4"-16 3/4" Solid Rod End ALL58112 Solid rod ends are built using 1045 steel and are then chrome plated for added wear resistance. End has a body width of .875" to match the width of standard rod ends.
ALL18615 ALL18617
Aluminum, 1/2" Aluminum, 1"
Flanged Spacers Part No.
Description
ALL18611 ALL18613 ALL18610 ALL18612
Aluminum, 1/4" Aluminum, 1/2"
ALL99314
ALL99315
Steel, 1/4" Steel, 1/2"
Aluminum Flat Spacers Flat spacers are great for shimming and adding additional clearance to brackets for brake calipers, power steering, alternators, dry sump pumps or just about anything to help with alignment issues. Package of 2. Thickness 3/8" I.D. (11/16" O.D.) 1/2" I.D. (1" O.D.) 1/8" ALL18740 ALL18760 1/4" ALL18742 ALL18762 3/8" ALL18744 ALL18764 1/2" ALL18746 ALL18766
Rod End Reducer Bushings Steel bushings reduce the rod end pivot ball I.D. to accept a smaller bolt size. O.D. To I.D. 2-Pack
Aluminum Washers Washer O.D. x I.D. Finish Countersunk Aluminum Washers 1" x #10 Clear
10-Pack
ALL18660
ALL18638
1/2" To 3/8" 5/8" To 1/2" 3/4" To 1/2" 3/4" To 5/8"
ALL18565 ALL18566 ALL18567 ALL18568
ALL18565-10 ALL18566-10 ALL18567-10 ALL18568-10
10-Pack
50-Pack
ALL18660 ALL18662 ALL18663 ALL18664 ALL18665 ALL18638 ALL18639
ALL18660-50 ALL18662-50 ALL18663-50 ALL18664-50 ALL18665-50
1" x 1/4" 1" x 1/4"
Clear Black Clear Black
1-1/4" x 1/4" 1-1/4" x 1/4"
Flat Aluminum Backer Washers 1" x #10 Clear
— —
1" x 1/4"
Clear
52
Made with FlippingBook flipbook maker