Small Block Chevy Drag Racing Headers Schoenfeld exhaust headers are custom fabricated from mild steel and include rigid flanges, precision formed primary tubes and four-into-one
Header Bolts Part No.
SCH3006-12
Description
SCH3006-12 SCH3006-14 SCH3006-16
3/8" x 3/4" L. x 5/16" Hex Head, 12-Pack 3/8" x 3/4" L. x 5/16" Hex Head, 14-Pack 3/8" x 3/4" L. x 5/16" Hex Head, 16-Pack
collectors. Applications listed fit small block Chevy with standard 23° cylinder heads. Headers with a “V” suffix in the part number feature “stepped” primary tubes for increased exhaust velocity. All
Slip-On 4-Tube Collectors Part No. Description SCHSO03541
Fits 2" Primaries, 3-1/2" Collector Fits 1-5/8" Primaries, 3" Collector Fits 1-3/4" Primaries, 3" Collector Fits 1-3/4" Primaries, 3-1/2" Collector
SCHSO63041 SCHSO73041 SCHSO73541 SCHSO83541
headers fit straight or angle plug cylinder heads and require short style oil filter. Sold per pair, complete with fasteners, gaskets and instructions.
Fits 1-7/8" Primaries, 3-1/2" Collector SCHSOM72530 Fits 1-3/4” Primaries, 3” Merge Collector NEW! Turn-Outs Angle the exit of exhaust in any direction. Part No. Size Length SCH2525 2-1/2" 10" SCH3023 3” 4-1/4” SCH3025 3" 10" SCH3026 3" 15-1/2" SCH3525 3-1/2" 10" SCH4025* 4" 10-1/2" SCH5025 5" 12" * Aluminized Collector Extensions Extensions are typically used to in- crease bottom end torque.
Primary Tube Dia.
Collector Dia. x Length
Part No.
Description
1973-88 GM “G” Body; 1970-81 GM “F” Body SCH185* SB Chevy Exhaust Headers 1-5/8"
3" x 8" 3" x 8" 3" x 8"
SCH185V* SCH186-3* SCH186* SCH186V* SCH187*
SB Chevy Exhaust Headers SB Chevy Exhaust Headers SB Chevy Exhaust Headers SB Chevy Exhaust Headers SB Chevy Exhaust Headers
1-5/8"-1-3/4"
1-3/4" 1-3/4"
3-1/2" x 8"
1-3/4"-1-7/8" 3-1/2" x 9"
1-7/8"
3-1/2" x 9"
1970-81 GM “F” Body; 1975-79 GM “X” Body; 1970-72 Monte Carlo Only SCH165A † SB Chevy Exhaust Headers 1-5/8"
3" x 8" 3" x 8"
SCH165VA † SCH166A † SCH166VA †
SB Chevy Exhaust Headers SB Chevy Exhaust Headers SB Chevy Exhaust Headers
1-5/8"-1-3/4"
1-3/4"
3-1/2" x 8"
1-3/4"-1-7/8" 3-1/2" x 9" * Will not fit OEM manual clutch linkage ball or A/C equipped applications. † For cars with engine in stock location or engine set back. Clears side and rear engine mounts. Will not fit Chevelle. Header Gaskets The same gaskets that are packed with Schoenfeld headers. Sold individually.
12" Length
24" Length
30" Length
36" Length
48" Length
Description
3" Dia.
SCH120030 SCH240030
–
SCH360030 SCH480030
3-1/2" Dia.
SCH120035 SCH240035 SCH300035 SCH360035 SCH480035
Header Tab Kit Typically used to secure slip-on collectors to headers, or to secure col- lector extensions to collectors. Two tab sets per collector are recommended. Part No.
Part No. SCH01501 SCH01511
Description
SB Chevy, 1-5/8" Square SB Chevy, 1-3/4" “D” Port
Description
SCH4003-4 SCH4003-6
Kit Includes (8) Tabs, (4) Bolts, (4) Lock Nuts And (8) Washers Kit Includes (12) Tabs, (6) Bolts, (6) Lock Nuts And (12) Washers
Latch Link Restraint Systems Latch Link Restraint Systems, which meet SFI 16.1 specifications, combine durable poly-
SRBSRB14
SRBSRB23C
SRBSRLV10.A
Mounting Hardware Part No.
ester webbing with lightweight, hardened steel adjusters. Selected restraints are for use with popular head and neck restraints. All restraints are sold with 3-bar slides to allow wrap-around mounting. Mounting hardware for floor mounting may be purchased separately. Black only. Part No. Description 5-Point Restraint Systems SRBSR71750D Latch Link III-5 Harness, 3" Lap/Shoulder, Double Pull Up, Fixed Sub SRBSR71050H Latch Link III-5H Harness, 2"/3" Shoulder, 3" Lap, LH Pull Up, Fixed Sub, HANS SRBSR76050H Latch Link III-5H Harness, 2"/3" Shoulder, 3" Lap, LH Pull Down, Fixed Sub, HANS SRBSR71750H Latch Link III-5H Harness, 2"/3" Shoulder, 3" Lap, Double Pull Up, Fixed Sub, HANS SRBSR76751H Latch Link III-5H Harness, 2"/3" Shoulder, 3" Lap, Double Pull Down, Adj. Sub, HANS 6-Point Restraint Systems SRBSR76560H Latch Link III-6H Harness, 2"/3" Shoulder, 3" Lap, RH Pull Down, HANS SRBSR71760H Latch Link III-6H Harness, 2"/3" Shoulder, 3" Lap, Double Pull Up, HANS SRBSR76760D Latch Link III-6 Harness, 3" Lap/Shoulder, Double Pull Down
Description
SRBSRB14 SRBSRB23C SRBSRLV10.A SRBSRLV4 SRBSRLV7NC
Snap-In Bracket, Use With Schroth Eye Bolts Bendable 2" Or 3" Bolt-In Bracket Slide Adjuster, 3-Bar For 2" Belts Slide Adjuster, 2-Bar For 2" Belts Slide Adjuster, 3-Bar For 3" Belts Wavy Washer For 7/16" Mounting Bolt Pivot Sleeve For 3/8" Or M10 Bolt
SRBSRS3 SRBSRS64 SRBSRS65 SRBSRS85 SRBSRS82
Pivot Sleeve For 7/16" Bolt Pivot Sleeve For 5/16" Or M8 Bolt
Washer For Bolt-In Bracket, 7/16" Hole Size SRBSRS86 Washer For Bolt-In Bracket, 5/16" Or M8 Hole Size SRBSRSG22 Eye Bolt, 7/16" x 1.50" (38mm) Thread Length SRBSRSG23 Eye Bolt, 7/16" x .875" (22mm) Thread Length SRBSRSG39 Reinforcement Plate With 7/16" Nut
578
Made with FlippingBook flipbook maker