FITTINGS & HOSES
Coated Braided Steel Lines Black coated braided steel lines have black aluminum ends. Choose #2, #3 or #4 line in straight/ straight or straight/ 90° configurations. Lengths stated are overall, end to end. #2 Line #3 Line
#4 Line
Length
Two -3 Straight
Two -3 Straight
-3 90° and -3 Straight
Two -4 Straight Ends
-4 90° And -4 Straight
6" 9"
ALL48385* ALL48386* ALL48371 ALL48372 ALL48373 ALL48374 ALL48375 ALL48376 ALL48378 ALL48379* ALL48380 ALL48383
ALL48387* ALL48388* ALL48361 ALL48362 ALL48363 ALL48364 ALL48365 ALL48366 ALL48368 ALL48369* ALL48370 ALL48382
ALL48413* ALL48414* ALL48415 ALL48416 ALL48417 ALL48418 ALL48419 ALL48420 ALL48422 ALL48423* ALL48424 ALL48425*
ALL48349* ALL48350* ALL48351 ALL48352 ALL48353 ALL48354 ALL48355 ALL48356 ALL48358 ALL48359* ALL48360 ALL48381
ALL48398* ALL48399* ALL48400 ALL48401 ALL48402 ALL48403 ALL48404 ALL48405 ALL48407 ALL48408* ALL48409 ALL48410*
12" 15" 18" 21" 24" 30" 36" 48" 60" 73"
* NEW!
Brake Hose Kits Kits include everything nec-
90 Degree Swivel Fitting Black anodized aluminum fitting swivels a full 360 degrees for convenient hose connection. 1/8"NPT fitting is commonly used in aftermarket calipers, gauge panels or anywhere a swivel connection would be useful. Part No. Description ALL50108 1/8"NPT to -3AN ALL50109 1/8"NPT to -4AN AN Union Fittings Black anodized aluminum flare union adapter fittings are commonly used to connect two hoses with female AN ends. Part No. Description ALL50090 -3AN to -3AN ALL50091 -4AN to -4AN
essary to complete the connec- tion between a 3/16" steel brake line and the brake caliper including two 15" steel braided hoses. Designed to fit calipers with 10mm x 1.50 threads (ALL42083/ALL42084) or 7/16" x -20 threads (ALL42081/ALL42082). Kit Components: • Two 15" Hoses With -3AN Ends • Two Banjo Bolts
• Four Crush Washers • Two Brake Line Clips
• Two -3AN To 3/16" Steel Brake Line Adapters • Two -3AN Banjo Fittings• Two Brake Line Tabs Part No. Description ALL42025
GM Metric Kit With 10mm-1.50" Fittings
ALL42027
Big GM Kit With 7/16"-20 Fittings
Bulkhead Fittings Black anodized aluminum bulkhead adapter fittings are perfect when plumbing needs to pass through a firewall, interior panel or a mounting bracket. Part No. Description ALL50092 Straight -3AN to -3AN ALL50093 Straight -4AN to -4AN ALL50094 90 Degree -3AN to -3AN ALL50095 90 Degree 4AN to -4AN ALL50096 Tee (Run) -3AN (3x) ALL50097 Tee (Run) -4AN (3x) ALL50098 -3AN Bulkhead Nut ALL50099 -4AN Bulkhead Nut Bulkhead Mounting Tab ALL60093 One-piece steel mounting tab with 7/16" hole can be bolted to the chassis or rear end to hold bulkhead fittings in place. Bracket is 5/64" thick.
D.O.T. Legal Brake Hose Kits
ALL50092 ALL50093
Kits include two 16" long #3 stainless steel braided lines with banjo fittings attached, banjo bolts, crush wash- ers, frame adapter fittings, frame tabs and holding clips. Part No. Description ALL42032 GM Metric Kit With 10mm-1.50 Bolts ALL42033 Big GM Kit With 7/16"-20 Bolts Clutch Line Kits Designed to connect clutch master
ALL50094 ALL50095
ALL50096 ALL50097
cylinder to hydraulic throw-out bearing or directly to transmis- sions with internal clutches.
Pre-assembled braided steel hose assemblies have #3 lines and are fitted with one -3AN straight end and one 3/16" inverted flare 90 degree hard line end. Also includes one 1/8" male to -3AN fitting (ALL50000). Part No. Description ALL46100-24 Kit With 24" Line ALL46100-36 Kit With 36" Line ALL46100-48 Kit With 48" Line
1"
1" Square
Mounting Tab shown with ALL50093 -4 Straight Bulkhead Fitting and ALL50099 Bulkhead Nut.
57
Made with FlippingBook flipbook maker