Electric Shifter Kits Make hands free, consistent automatic shifting. Shifnoid electric shifters attach to your existing shifter and require no CO2. Offered for compat- ibility with a variety of popular
Engine Lean-Out Kit SHFPC3000 Ideal for alcohol engines, Engine Lean- Out Kit provides quicker engine warm-up. Kit connects to the intake manifold and includes “push-to-connect” fittings, air line and industrial grade valve.
2- or 3-speed automatic transmissions, standard or reverse pattern valve bodies and shifters. 3-speed models actuate both the 1-2 and 2-3 shifts. Includes ready to bolt-on bracket, solenoid and relay. RPM- activated switch not included. Part No. Description Shifter Compatibility SHFSN5000FC 2-Speed Standard Pattern Hurst Quarterstick, B&M Pro Stick, TCI Outlaw/Thunderstick SHFSN5000RC 2-Speed Standard Pattern Hurst Quarter Stick II SHFSN5055B 3-Speed Reverse Pattern B&M Pro Stick, TCI Outlaw/Thunderstick SHFSN5055H 3-Speed Reverse Pattern Hurst Quarterstick SHFSN5057 3-Speed Standard Pattern Hurst Quarterstick, B&M Pro Stick, TCI Outlaw/Thunderstick SHFSN5070 3-Speed Reverse Pattern B&M Pro Ratchet SHFSN5200 2-Speed Standard Pattern B&M Pro Bandit Part No. Description Replacement Components SHFSN3000 Solenoid For SN5100 SHFSN3400 Solenoid For #SN5000FC Electric 2-Speed Shifter Kit SHFSN6000 Shifter Not Included
Starting Line Controller SHFSN8000 In-line linkage
controller provides a smooth transition, from preset launch RPM to full throttle, with the throttle fully to the floor. May be actuated with the line lock or trans-brake. The starting line RPM may be set as low as idle. CO2 Bottle Backup Air Filler SHFPC1800
Ideal for unexpected emergencies or full time use, special backup air filler valve allows filling CO2 bottle with compressed air directly from an air tank or air compres- sor. Engineered for the high pressures associated with CO2, valve is permanently installed onto regulator and ready for use.
Solenoid/spring activated shifter provides hands-free shifting and unsurpassed consistency. Bracket and solenoid kit is designed for use on 2-speed transmissions using B&M Pro Stick, Hurst Quarter Stick, TCI Outlaw, TCI Thunderstick (ft. exit cable) and Hurst Quarter Stick II (rear exit cable) shifters. Air Shifter Kits Perform hands-free, consis-
CO2 Accessories
SHFPC100
SHFPC2008
Part No. SHFPC100 SHFPC125 SHFPC290 SHFPC300
Description
Pressure Rupture Disc With Nut
CO2 Line Kit
Straight Fitting, 1/8" NPT To 1/4" Hose, Quick Connect
90° Swivel Fitting, 1/8" Pipe To 1/4" Hose, Quick Connect SHFPC310 3-Way Air Valve, Normally Open/Normally Closed, (3) 1/8"-27 NPSF Ports SHFPC2000 Perma-Seal CO2 Outlet Seal, Provides Permanent Seal Between CO2 Regulator And Bottle Valve SHFPC2004 Single Gauge CO2 Regulator, With Gauge And Quick Connect Fitting SHFPC2008 Dual Gauge CO2 Regulator, Adjustable Dual Gauge With Quick Connect Fitting SHFPC2020 Lightweight Aluminum CO2 Bottle With Valve, 10 Oz. SHFPC2030 2.5 Lb. CO2 Bottle With Standard Valve, 4-3/8” Dia.
tent shifting using CO2. Offered for compatibility with a variety of popular 2- or 3-speed automatic transmissions,
standard or reverse pattern valve bodies and shifters. 3-speed models actuate both the 1-2 and 2-3
RPM-Activated Switches Typically used with air or electric shift- ers, switches prevents activation due to premature RPM climb caused by tire slippage or converter flash. Compatible with all 8-cylinder ignitions (except magnetos). Part No. Description SHFNCRPM1000 RPM-Activated Switch SHFNCRPM4000
shifts. Unit attaches to existing shifter and includes ready to bolt- on bracket, shifting arm, cylinder, solenoid and hardware. CO2 bottle and supply lines not included.
Shifter Compatibility
Part No.
Description
Hurst Quarterstick, B&M Pro Stick, TCI Outlaw/Thunderstick Hurst Quarterstick, B&M Pro Stick, TCI Outlaw/Thunderstick
Adj-A-Chip, Plug-In Module, 1,000-11,000 RPM
SHFSA4000 2-Speed Standard Pattern
SHFSA4055 3-Speed Reverse Pattern SHFSA5400 2-Speed Standard Pattern
B&M Pro Bandit
581
Made with FlippingBook flipbook maker