Stage 2 Boost Cooler Forced Induction Progressive Water-Methanol Injection Kit SNO210
Gas Water-Methanol Injection Systems Snow Performance water-methanol injection systems provide a cooler intake air charge, suppressing detonation, while ef- fectively increasing pump gas octane. Systems listed below are engineered for gas applications and are sold complete with all required hardware. Stage 2 Boost Cooler For Forced Induction Applications SNO20010 Suited to forced induction applications that are fuel injected or carbureted, Stage 2 water-methanol injection kit uses torque over a wide range of RPM. Cooler intake charge combines to offer increased performance and detonation suppression. Kit is sold complete with Ultra High Output pump, 3 quart reservoir, digital variable controller, level switch, solenoid, Hypersonic nozzles, nylon tubing and necessary hardware. Stage 2 MAF/MAP SNO212 boost pressure to progressively inject methanol-water into the engine, provid- ing a improvement in horsepower and
Engineered exclusively for super- charged or turbocharged applica- tons, kit adds 50-70 horsepower, while decreasing inlet air tempera- tures by up to 100° F. Kit uses the progressive VC-50 controller to proportionally inject more or less
water-methanol according to boost pressure for maximum efficiency. Kit includes VC-50 controller, 300 PSI UHO pump, (2) Hypersonic nozzles, methanol resistant high temp nylon tubing, nickel-plated fittings and all required hardware. Stage 3 Boost Controller SNO310
The most advanced water-methanol injection system currently offered for EFI and forced induction applications, offering 50-110 HP. System creates a two dimensional injection map based off boost and fuel injector pulse to meet engine requirements and provide increased performance, regardless of engine RPM. System is sold complete with Ultra High Output Pump, 3 quart
Water-methanol injection kit is specifi- cally engineered for naturally aspirated or forced induction applications using a MAF (Mass Air Flow) or MAP (Manifold Absolute Pressure) sensor. Unit utilizes a progressive controller that injects methanol-water according to sensor input for maximum performance. Ad-
reservoir, Digital Variable Mapping Controller, level switch, sole- noid, Hypersonic nozzles, nylon tubing and necessary hardware. Water-Methanol System Accessories Part No. Description SNO40008 Boost Juice, Pre-Mixed Water/Methanol, (4) 1 Gallon Jugs SNO40014 2.5 Gallon Reservoir Upgrade, 13" Long x 9-1/2" High x 7-1/2" Wide SNO40035 Low Level Indicator SNO40040 Dual Nozzle Upgrade, Allows Adding Another Nozzle To Any Boost Cooler Kit SNO40060 Solenoid Upgrade, Prevents Siphoning When Nozzle Is Exposed To Vacuum SNO40110 Nozzle Mounting Adapter, Allows Mounting Nozzle Into Silicone/Rubber Intake Tube SNO40120 Aluminum Nozzle Mounting Bung, 1" O.D. x 1/4" Thick, 1/8" NPT Threads SNO40130 Steel Nozzle Mounting Bung, 1" O.D. x 1/4" Thick, 1/8" NPT Threads
justable start and full points allow meeting engine requirements. System offers 20-35 HP to naturally aspirated vehicles and 50-80 HP to forced induction applications. Sold complete with Ultra High Output pump, 3 quart reservoir, MAFU Progressive Controller, level switch, solenoid, Hypersonic nozzles, nylon tubing and necessary hardware.
Locking Header Bolts The only reusable, locking header bolts available. Also available in stainless steel for limited usage. Part No. Description SGE8900 GM LS1/LS6, 8mm-1.25 x 22mm 6-Pt. DHH, 12 Pcs. SGE8906 Ford 4.6/5.4L Modular, 8mm-1.25 x 22mm 6-Pt. DHH, 16 Pcs. SGE8906M Ford 4.6/5.0/5.4L ‘05-Up Modular, 8mm-1.25 x 25mm, 6-Pt DHH, 16 Pcs. SGE8911 SB Chevy 265-400, 3/8"-16 x 3/4" DHH, 12 Pcs. SGE8911A SB Chevy 265-400, 3/8"-16 x 1" DHH, 12 Pcs. SGE8912 BB Chevy 396-454, 3/8"-16 x 3/4" DHH, 16 Pcs. SGE8912A BB Chevy 396-454, 3/8"-16 x 1" DHH, 16 Pcs. SGE8913 SB Ford 260-351, 3/8"-16 x 3/4" DHH, 16 Pcs. SGE8913A SB Ford 260-351, 3/8"-16 x 1" DHH, 16 Pcs. SGE8915 SB Chrysler 273-360, 5/16"-18 x 7/8" 6-Pt. DHH, 12 Pcs. SGE8916 Chrysler 5.7L Hemi, 8mm-1.25 x 25mm Bolts 6-Pt. DHH, 17 Pcs. SGE8916A* BB Chrysler 383-440, Buick/Olds/Pontiac, 3/8"-16 x 1" 6 Pt. DHH, 12 Pcs. SGE8931 SB Chevy 265-400, 3/8"-16 x 3/4" 12-Pt., 12 Pcs. SGE8932 BB Ford 429-460 and 390-428 “FE”, 3/8"-16 x 1" 6-Pt., 16 Pcs. SGE8933 SB Ford 260-351, 3/8"-16 x 1" 12-Pt., 16 Pcs. SGE8935 SB Chrysler 273-360, 5/16"-18 x 1" 12-Pt., 12 Pcs. SGE8951 SB Chevy 265-400, 3/8"-16 x 1" 6-Pt., 12 Pcs., Stainless SGE8952 BB Chevy 396-454, 3/8"-16 x 1" 6-Pt., 16 Pcs., Stainless SGE8953 SB Ford 260-351, 3/8"-16 x 1" 6-Pt., 16 Pcs., Stainless * Except BB Chrysler 413. “DHH” = Double Hex Head. Header Collector Locking Kit SGE8950 No more lost collectors.
589
Made with FlippingBook flipbook maker