Standard And Lightweight Pro Race Steel Spools Spools lock both axles together so both wheels will turn at the same speed.
Ford 9" Differential Cases Strange offers nodular iron
Aluminum Case
Ford 9" cases in S-Series and Pro Series in addition to aluminum cases. All are
Forged steel, lightweight Pro Race spools are CNC-machined, lightened and heat treated to keep rotational weight to a minimum without sacrificing strength. Standard spools use the same qual- ity materials and workmanship but are not lightened. Part No. Description Standard Spools STGD1522* GM 8.5" 10-Bolt, 28-Spline STGD1526* GM 8-7/8" 12-Bolt Auto, 30-Spline Lightweight Pro Race Spools STGD1548 Dana 60, 35-Spline STGD1549* GM 8-7/8" 12-Bolt Auto, 33-Spline STGD1554 Ford 9", 33-Spline, 2.891" Or 3.062" Cases STGD1558* Ford 8.8", 33-Spline * Requires C-clip eliminator kit or replacement housing ends for axle retention. C-Clip Eliminators Eliminates the factory C-clip, providing a safety hub with
available with 3.062" or 3.250" housing bores. S- Series cases are reinforced and include durable nodular iron caps. Pro Series cases are virtually indestructible with extra heavy duty reinforced cases and chrome moly caps. Aluminum cases have forged aluminum caps and are ideal for lightweight setups where gear life is not critical.
3.062" Housing Bore Part No.
3.250" Housing Bore Part No.
Description
Lightweight Aluminum Case Pro Series Nodular Iron Case S-Series Nodular Iron Case
STGN1901 STGN1905 STGN2205
STGN1904 STGN1906 STGN2206
Ford 9" Pinion Supports Street/strip “Daytona” nodular iron support and CNC-machined, forged aluminum (race only) sup- port include races and fasteners. Bearing and seal kit must be purchased separately. Part No. Description STGN1914
sealed, press-on bearings to pre- vent axle/wheel assembly from sliding out of the housing during an axle or differential failure. Required when replacing original C-clip axles with aftermarket performance units. Sold in pairs. Part No.
Daytona Pinion Support, Use STGN1916 Bearing Kit Forged Aluminum Pinion Support, 28- Or 35-Spline Pinions, Use STGN1923 Or STGN1924 Bearing Kit
STGN1922
Related Components STGN1916
Pinion Bearing And Seal Kit, For STGN1914
STGN1923 STGN1924 STGN1941
Pinion Bearing And Seal Kit, For STGN1922, 28-Spline Pinion Pinion Bearing And Seal Kit, For STGN1922, 35-Spline Pinion
Description STGA1090 For Strange Axles In Ford 8.8" Housing, Except Truck Or Rear Disc Brakes, Street/Strip STGA1093 For Stock Or Aftermarket C-Clip Axles In 1986-93 Ford Mustang 8.8” With OEM Housing Ends, For Street/Strip Replacement Component STGA1030E C-Clip Eliminator Gasket, GM 10-Bolt 7.5"/7.625"/8.2"/8.5"
Pinion Tail Bearing Retainer
Transmission And Pinion Yokes Significantly stronger than 1310 or 1330 series, 1350 yokes are offered in heavy duty or extra strong chrome moly. Part No. Description Transmission Yokes STGU1655
Chrysler 904/727; Doug Nash; Liberty, 30-Spline, Heavy Duty Chrysler 904/727; Doug Nash; Liberty, 30-Spline, Chrome Moly Ford C-6; Top Loader; T-45, 31-Spline, Heavy Duty
STGU1666 STGU1659 STGU1662 STGU1667 STGU1667N STGU1650 STGU1664 STGU1664N STGU1603 STGU1604 STGU1605 STGU1610 STGU1630 STGU1641 STGN1918*
Housing Ends And Axle Bearings Part No. Description STGA1013
GM Powerglide; TH-350, 27-Spline, Heavy Duty GM Powerglide; TH-350, 27-Spline, Chrome Moly GM Powerglide; TH-350, 27-Spline, Roller Bearing Tailhousing, Chrome Moly GM TH-400; Jerico, 32-Spline, Spicer Heavy Duty GM TH-400; Jerico, 32-Spline, Chrome Moly GM TH-400; Jerico, 32-Spline, Roller Bearing Tailhousing, Chrome Moly
Timken Tapered Axle Bearing, Locking Ring And Seal, 1.562" Bore For 3.150" I.D. Housing End, Each
STGA1016 Early Big Ford Retainer Plate With 1/2" Bolt Holes, Each STGA1019 Axle Bearing And Locking Ring, 1.772" Bore, 3.150" Housing End, Each STGA1020 Axle Bearing And Locking Ring, 1.531" Bore, 3.150" Housing End, Each STGA1021 Axle Bearing And Locking Ring, 1.562" Bore, 3.150" Housing End, Each STGA1023 Small Ford Axle Bearing, Locking Ring And Retainer, 1.562" Bore For 2.835" I.D. Housing End, Each STGH1135 Big (Early) Ford 9" Housing Ends, 1/2" Holes, 1.300" Wide, Pair STGH1137 Big (Late) Ford 9" Housing Ends, 3/8" Holes, 1.300" Wide, Pair
Pinion Yokes And Related Components STGU1602
Chevy 12-Bolt Car, 30-Spline, 2.688" Long, Heavy Duty
Ford 9", 28-Spline, 4.048" Long, Chrome Moly, Requires STGN1918
Ford 9", 35-Spline, 4.048" Long, Chrome Moly GM 8.5" 10-Bolt, 30-Spline, 3.375" Long, Heavy Duty U-Bolts, 1350 Series Pinion Yoke, Pair Ford 8.8", 30-Spline, 3.150" Long, Heavy Duty Heavy Duty U-Joint, 1350 Series, Non-Cross Drilled
Aluminum Support Covers Ultra and Ultimate covers support the main caps to significantly reduce ring gear deflection and cap distortion or breakage. Ultimate covers are tapped for an optional LPW brace kit. Mounting bolts and fill/drain plugs are included. Part No. Description STGR5201
Pinion Yoke Spacer Kit, For STGU1603 Yoke * Required when STGU1603 is used with a stock or Daytona pinion support.
Driveshaft Components Helpful when fabricating custom driveshafts. Part No. Description STGU1670 Spicer 1350 Weld Yoke, For 3" OD x .083" Driveshaft Tube STGU1672 Forged Chrome Moly 1350 Weld Yoke, For 3" OD x .083" Driveshaft Tube STGU1700T 3" x .083" Wall Seamless Chrome Moly Tubing, 5' Long
Ultra Support Cover, GM 8.2"/8.5" 10-Bolt Ultra Support Cover, GM 8-7/8" 12-Bolt Auto Ultimate Support Cover, GM 8-7/8" 12-Bolt Auto Ultimate Support Cover, GM 7.50"/7.625" 10-Bolt
STGR5206 STGR5207 STGR5219 STGR5234
Ultimate Support Cover, Ford 8.8"
599
Made with FlippingBook flipbook maker