Clip-On Wire Separators Tough nylon separators withstand tem- peratures up to 400°F and are available for 7-8mm and 10.4mm spark plug wires. Choice of four colors. Each kit contains two 4-wire separators, two 3-wire separators and two 2-wire separators. Plug Wire Size Black Red Yellow
Multi-Purpose Tool TAY43390
Multi-purpose tool will cut, strip and crimp all popular primary wire. Made of high- carbon steel, it will crimp both 7mm and 8mm spark plug wire ends. Aluminum Battery Boxes Three-piece, .040" aluminum boxes meet SFI 8.1 specifications and are required by NHRA and IHRA when
Blue
TAY48100
7- 8mm TAY42800 10.4mm TAY42809
TAY42820 TAY42829
TAY42840
TAY42860
— TAY42869
Clamp Style Wire Separators Separates, organizes and supports
there is no firewall between the driver and the battery. The 100 Series box accepts most large automotive batter- ies; 200 Series box fits Optima red and yellow top, Odys- sey PC1500, and most group 34/78 and 75/25 batteries; the 300 series fits Odyssey PC925 and PC1200 batteries. Boxes include hold down and mounting hardware. Part No. Description 100 Series Aluminum Battery Boxes (13.5" L. x 9.5" W. x 10" H.) TAY48100 Battery Box TAY48101 Battery Box And 2 Gauge Cable Kit TAY48103 Battery Box And 1 Gauge Cable Kit 200 Series Aluminum Battery Boxes (11.25" L. x 9.5" W. x 8.75" H.) TAY48200 Battery Box TAY48201 Battery Box And 2 Gauge Cable Kit TAY48203 Battery Box And 1 Gauge Cable Kit 300 Series Aluminum Battery Box (9.5" L. x 8.25" W. x 7.75" H.) TAY48300 Battery Box improve weight distribution and traction while reducing front end weight and engine clutter. Kits include pre-terminated ends, 2 gauge, 100% solid copper cable, battery tray(s), 3/8" J-bolt hold downs and hardware. Single or side-by-side, dual battery kits are available. Part No. Description TAY48000 Single Battery Kit (16' Cable, Single Battery Tray And Hold Down) TAY48500 Side-By-Side Dual Mount Kit (17' Cable, Two Battery Trays And Hold Downs) Ground Strap TAY20314 Typically run from the engine block to frame or firewall for a good ground source. Four-gauge braided cable is 14" long and includes ring-style terminal ends. Master Disconnect Switch TAY1032 Two-post switch is rated at 180 amp continuous capacity and provides a direct power shut-off for entire electrical system. Required by NHRA/ IHRA on any car quicker than 9.99 E.T. and all cars with trunk mounted battery. Trunk Mount Battery Kits A trunk mounted battery will
ignition wires for a neat, or- ganized job. Molded from non-conductive type 6/6 nylon, separators will not melt, mar, distort, crack or
fade. Available to fit 7-8mm and “409" 10.4mm wire sizes. Choice of three colors. Each kit contains two 4-wire separators, two 3-wire separators and two 2-wire separators. Plug Wire Size Black Red Blue 7-8mm TAY42700 TAY42720 TAY42760 10.4mm TAY42709 TAY42729 TAY42769 “T" Clip “409" Wire Separators TAY42609
Each clip separates two “409" Pro Race Wires in tight-fit areas for neat, tangle-free routing. Four clips per package. Easy installation. Wire Markers Identify spark plug wires quickly. Offered in clip-on or heat shrink versions, kits are for use with 7-10.4mm plug wire. Each kit includes (2) sets of numbers, 1 through 8. Part No.
Description
TAY41058 TAY41060
Shrink Sleeve Wire Markers, Black With White Numbers Clip-On Wire Markers, White With Black Numbers
Spark Plug Boot Protectors Universal fit plug boot protectors are 6 inches long and withstand temperatures up to 1200°F.
TAY48000
1 Per Pkg. Part No.
8 Per Pkg. Part No.
Description
Silver Black
TAY2523
TAY2524
— TAY2560 — TAY2562 — TAY2566
Red Blue
Professional Crimp Tool Tool uses a positive ratch-
eting system to pro- duce factory quality crimps on spark plug wire terminals. Crimp dies may be purchased separately and used to cut and crimp traditional wire terminals. Part No. Description TAY43400 Professional Crimp Tool TAY43401 Crimp Die, Cuts 10-22 Gauge Insulated Terminals TAY43402 Crimp Die, Cuts 10-22 Gauge Non-Insulated Terminals
610
Made with FlippingBook flipbook maker