Boost Tee Compact, lightweight manual boost controller allows adjusting boost from under the hood. Easy to install, the Boost Tee features an accurate, detent system for boost adjustment. Compatible
Model Specific Blow-Off And Bypass Valves
Easy to install and set-up, dual sequential port units deliver quiet operation during mild boost and maximum performance at full boost. Sold complete with blanking plug and gasket, where required. Choose from blue, black or red anodized.
with virtually any turbocharged application, unit is sold complete with billet mounting bracket. Choose from blue or black anodized.
Blue Part No.
Black Part No.
Description
Boost Tee
TBSTS-0101-1001
TBSTS-0101-1002
Blue Part No.
Black Part No.
Red Part No.
Description
Boost Gauge TBSTS-0101-2023 Mechanical boost gauge features a black face, bright backlighting, silver bezel and 0-30 PSI range. Sold complete with hardware required for installation. e-Boost 2 Equally suited to street or strip, e-Boost 2 is a complete boost management system that provides the ability to control, monitor, map and compensate boost. Controller allows up to six levels of boost, boost on demand and adjustable boost levels by time or RPM. May
Mitsubishi EVO VI-X Subaru WRX, STi
— TBSTS-0205-1021 TBSTS-0205-1020
TBSTS-0205-1015
—
—
Mazda CX7, Subaru Legacy/Liberty GT TBSTS-0205-1009
—
—
Kompact Series Blow-Off And Bypass Valves Dual Port Universal Fit TBSTS-0203-1022 Dual outlet type blow-off valve vents into the atmosphere and back into the intake. Ports with sequential timing offer quiet operation during normal driving, while vent-to-atmo- spheric design is ideal for race conditions. 25mm unit may be converted to full atmo- spheric or full bypass unit by using suppied port blanking plug. Fits most applications using an OEM Bosch or Denso bypass valve. Plumb Back TBSTS-0203-1222 Plumb Back system recirculates all excess pressure back into the intake only, while maintaining the performance and reliability of a premium blow-off valve. 25mm unit fits most applications using an OEM Bosch or Denso bypass valve.
also be used to control water, methanol or nitrous injection, con- trol shift/warning lights and monitor RPM. Choose from traditional 2-5/8" or sport compact 60mm units.
Black/Silver 2-5/8" Part No. TBSTS-0301-1013
Sport Compact 60mm Part No.
Description
e-Boost 2
TBSTS-0301-1003
Fuel Pressure Regulator TBSTS-0401-1101
Lighter and more compact than previous models and suitable for engines with up to 800 horsepower, Turbosmart’s Fuel Pressure Regulator features (2) 1/8" NPT inlet ports, (1) 1/8" NPT return port and an 1/8" NPT gauge port. Regulator is fitted with a premium
Boost Controllers Dual Stage TBSTS-0105-1002 Suitable for all turbocharged appli- cations, dual stage controller delivers fast boost response and two adjust- able boost levels. Sold complete with Rocket Launcher switch and necessary hardware for installation. Black anodized.
diaphragm and stainless steel valve and seat to allow compat- ibility with any fuel including E85. Regulator has a base pressure adjustment from 30-90 PSI with a 1:1 ratio. lue anodized finished. Fuel Pressure Gauge TBSTS-0402-2023
Precision fuel pressure gauge includes a liquid-filled white face with 0-100 PSI range. An 1/8" NPT fitting allows direct mounting to any TurboSmart fuel pressure regulator.
JEREMIAH WILHELM
ROBERT HOGAN
627
Made with FlippingBook flipbook maker