Rear Lower Control Arms For 2005-14 Ford Mustang Engineered to enhance traction and deliver
Rear Upper And Lower Control Arm Reinforcement Kits For Ford Mustang Engineered for the do-it- yourselfer, reinforcement kits are used to strengthen the rear upper and lower control arm mounting points, preventing suspension dam- age common to drag racing. A must when using aftermarket control arms. Kits are sold complete with necessary hardware. Some drilling required, welding is optional. Part No. Description UMI1001 1979-93 Ford Mustang, Upper And Lower Control Arm Reinforcement Kit, UMI1002 1994-2004 Ford Mustang, Upper And Lower Control Arm Reinforcement Kit Rear Upper And Lower Adjustable Control Arms For 1979-98 Ford Mustang Direct, bolt-on replacement rear control arms are designed to enhance traction, eliminate wheel hop and reduce ET’s of 1979-98 Ford Mustang. Heavy duty control arms, fitted with polyurethane bushings, chrome moly adjusters and spherical 3/4” rod ends, are fully adjustable to help optimize pinion angle. Uses OEM hardware. Offered with choice of gloss black or red powder coated finish. Black Red Description Part No. Part No. Upper And Lower Adjustable Control Arms UMI101517-B UMI101517-R
improved elapsed times to 2005-14 Ford Mustang, heavy duty, 1” x 2” boxed steel rear lower control arms are fitted with greasable polyurethane bushings. Sold per pair with gloss black or red powder coated finish. Description Black Red Rear Lower Control Arms UMI1034-B UMI1034-R Rear Lower Control Arm Relocation Brackets
Increase traction and reduce elapsed times by optimizing the vehicle’s instant center with Rear Lower Control Arm Relocation Brackets. Direct, bolt-on adjustable mount- ing brackets lower control arm mounting location by 2”, 2-3/4” or 3-1/4”. Sold per pair complete with necessary hardware. Of- fered with black or red powder coated finish.
Black
Red
Description
Part No.
Part No.
1982-02 Camaro/Firebird 2005-14 Ford Mustang
UMI2012-B UMI2012-R UMI1060-B UMI1060-R
Heavy Duty Panhard Bars For 2005-14 Ford Mustang
Heavy duty, tubular steel Panhard bars, engineered for 2005-14 Ford Mustang, adds strength and stability without sacrificing ride quality. Fitted with greasable polyurethane bushings, Panhard bars are offered in single or double, on-car adjustable versions with gloss black or red powder coated finish. Description Black Red Heavy Duty Panhard Bar, Single Adjustable — UMI1039-R Heavy Duty Panhard Bar, On-Car Adjustable UMI1044-B UMI1044-R
Pro Street Ring And Pinion Gear Sets Pro Street Ring and Pinion Gear Sets are manufactured from 4320 high impact material with a 1.75% nickel content, more impact resistant than OEM gear sets, yet without compromising longevity. High quality gear sets offer quiet operation, consistent installation and setup, and are sold complete with a detailed instruction sheet.
Ford 9" 9" Dia. Ring Gear 28-Spline Pinion Part No. Ratio USG07-890350 3.50 USG07-890370 3.70 USG07-890389 3.89 USG07-890411 4.11 USG07-890430 4.30 USG07-890457 4.57 USG07-890500 5.00 USG07-890514 5.14
GM 12-Bolt Passenger 8-7/8" Dia. Ring Gear 30-Spline Pinion Part No. Ratio USG01-888411 4.11 USG01-888456 4.56 USG01-888456X* 4.56 USG01-888488 4.88 * Fits 3.08-3.73 ratio carrier.
Chrysler 8.75" (Late 1969-73) 8-3/4" Dia. Ring Gear 10-Spline Pinion, 1.875" Dia. Part No. Ratio USG03-887430L 4.30 USG03-887486L 4.86 Pro Street Ring And Pinion Gear Sets Ford Super 8.8” IRS (2015-Up Mustang)8.8” Dia. Ring Gear 30-Spline Pinion Part No. Ratio USG07-888373-15 3.73 USG07-888391-15 3.91 USG07-888411-15 4.11
ROY PARISH
633
Made with FlippingBook flipbook maker