REAR ENDS & AXLES
Custom Width Ford 9" Housing ALL68710
9" Non Floater Housing Kit For GM Intermediate Metric Chassis
Housings, for stock or floating axles, can be built to any width and pinion location. Floating axle housings are available with Allstar/Howe/Port City, SCP or AFCO 5x5, or Wide 5 Pins. Stock housings can be ordered with small Ford, big Ford, or new style big Ford ends. Select used center sections, as well as new Heavy Duty or “Hot Rod” style center sections, may be specified. “Hot Rod” center section provides clearance for brackets or exhaust systems in street rods and vehicles with limited space. All hous- ings have select used centers, new axle tubes installed and are
ALL68756
jig-welded for straightness. To order please call and request a special order form, fill in all of the required information and return to us with a signature attached.
Scan for the Custom Width Ford 9" Housing order form.
ALL68758
Housings are non-returnable and offered on a special order basis only. Rear End Station Brackets ALL10178 Stand adapter
Housing kit fits the 1978-88 GM intermediate chassis. Replace a stock GM 7.5" rear-end with the much stronger Ford 9" style. Kit includes a select used center section, new axle tubes with large bearing late Ford/Torino style-ends, 31-spline axles with bearings and seals installed, drilled for studs with 5 on 4-1/2" or 5 on 4-3/4" bolt circles. Choose from two widths, 58" and 60" axle flange to axle flange. Part No. Description ALL68758 Ford 9" Housing Kit 58" With GM Mounts ALL68756 Ford 9" Housing Kit 58" Without GM Mounts ALL68759 Ford 9" Housing Kit 60" With GM Mounts ALL68757 Ford 9" Housing Kit 60" Without GM Mounts
brackets fasten to adjustable arms of most engine stands. Supports full size car
and light truck rear axle housings when servicing or replacing differential gear sets. Position housing onto arms and secure into place with included retaining straps. (Engine stand sold separately). Engine Stand Not Included Pinion Centering Jig ALL68370 Pinion centering jig fastens to the rear end housing and locates the pinion centerline when building or narrow- ing housings. Machined slots are designed to retain most tape measure ends for accurate measurements. Applications include GM 12 and 14-Bolt, Dana 44 and 60, Chrysler 8-3/4", Ford 8.8" and 9" housings.
Ford 9" Cut To Fit Flanged Axles Cut to fit 31-spline axles for Ford 9" rear ends are a great alternative to custom axles for street, drag racing and circle track
use. Axles are drilled for .687" press-in style wheel studs and have multiple wheel bolt patterns for 5 on 4.5", 4.75" and 5" bolt circles.
Axles have .470" thick flanges with a 5.94" outer diameter and a 3.06" hub register to center most rotors and drums. Axles with bearings have a 3.150" O.D. bearing installed for housings with large bearing ends, a press-on sleeve to retain bearing to the axle and an axle retainer for large bearing late/Torino style housing end. Wheel studs sold separately. Part No. Description ALL67500 Axle, 29-1/2" Long (With 10" Of Spline) ALL67501 Axle With Bearing, 29-1/2" Long (With 10" Of Spline) ALL67502 Axle, 33" Long (With 9" Of Spline) ALL67503 Axle With Bearing, 33" Long (With 9" Of Spline) Related Items Part No. Description ALL44111 1/2"-20 Wheel Studs, 5-Pack ALL44117 5/8"-18 Wheel Studs, 5-Pack ALL72315 Replacement Axle Bearing
Ford 9" Truss Support ALL68330 Weld-on support
adds strength to rear axle housing and reduces un- wanted flex during extreme torque. Constructed of 12 gauge (.108") steel. 36" long x 2" wide.
66
Made with FlippingBook flipbook maker