REAR ENDS & AXLES
Ford 9" Housing Ends Housing ends are welded into 3/16" wall x 3" O.D. axle tubes when build- ing a custom width housing or con- verting to larger axles. Ends feature a stepped design with a beveled welding flange to help position flange in tube for easier installation. Part No. Description ALL68308 Large Bearing, Late/Torino Style ALL68309 Large Bearing, Early Model Ford 9" Axle Bearing Assembly ALL72315 Replacement rear axle bearing used in many Ford car and truck rear ends. Bearing measures 3.150" O.D. to fit into Big Ford (New Style) housing ends and has an I.D. of 1.565". A seal and press- on retaining sleeve are included. Ford 9" Axle Spacer Plates Spacer plate takes the place of
Spools Replace a troublesome positive trac-
tion unit with a high quality Allstar spool. Substantially lighter than conventional carriers, spools deliver equal power to both rear wheels. Ultra-lite steel spools have more lightening holes and a narrower ring gear flange than standard units. Ford 9" Steel Spools Part No. Description ALL68060 28-Spline, 8.6 Lbs. ALL68062 28-Spline, Ultra-Lite, 6.3 Lbs. ALL68063 28-Spline, Ultra-Lite Scalloped, 6.0 Lbs. ALL68064 31-Spline, Scalloped, 7.6 Lbs. ALL68066 31-Spline, Ultra-Lite, 6.1 Lbs. ALL68067 31-Spline, Ultra-Lite Scalloped, 5.8 Lbs. ALL68070 35-Spline, For 3.250" Case, 7.6 Lbs. ALL68072 35-Spline, For 2.893" Or 3.062" Case, 7.9 Lbs. ALL68074 40-Spline, For 3.250" Case, 6.7 Lbs. Aluminum Spools Part No. Description ALL68111 Ford 9", 31-Spline Axles, 3.7 Lbs. Mini Spools Mini spool assemblies re-
ALL68060
drum brake backing plate and properly preloads the tapered style axle bearing. Spacers fit large bearing Ford 9" housing ends. Sold each. Part No. Description ALL72318 Late Torino Style ALL72319 Early Style
ALL72318
place the OE side and spider gears in open style carriers to provide equal traction to both axles. Mini spools are precisely machined for proper fit and heat treated for durability.
ALL68122
ALL68164
Ford 9" Axle Retainers Retainers bolt to the housing ends to retain the axle/bearing into large bearing Ford 9" housings. Steel retainers are 3/16" thick and designed to fit over axles eliminating the need to remove bearing from axle, making them ideal for use with Allstar Performance cut to fit axles. Part No. Description ALL72316 Late Torino Style ALL72317 Early Style Ford Backing Plate T-Bolts ALL72042 Unique 3/8"-24 x 1-1/4" T-head bolts are re- quired to mount backing plates and brackets to late model Torino 9" housing ends. Package of 8.
• 1957-87 Ford 9" Rear Ends With 3/4" Cross Pin • 1981-94 Ford 8.8" Rear Ends With 28-Spline Axles
• 1976-88 GM 7.5" With 7.5" Or 7.625" Ring Gear, 26-Spline Axles • 1964-72 GM 10-Bolt With 8.2" Dia. Ring Gear, 28-Spline Axles • 1970-76 GM 10-Bolt With 8.5" Dia. Ring Gear, 28-Spline Axles • 1965-76 GM 12-Bolt With 8.875" Dia. Ring Gear, 30-Spline Axles Part No. Description ALL68121 Ford 9", (Lightweight) 28-Spline ALL68122 Ford 9", (Lightweight) 31-Spline ALL68168 Ford 8.8", 28-Spline ALL68166 ‡ GM (7.5" Ring Gear), 26-Spline ALL68162 GM 10-Bolt (8.2" Ring Gear), 28-Spline ALL68160 GM 10-Bolt (8.5" Ring Gear), 28-Spline ALL68164 GM 12-Bolt (8.875" Ring Gear), 30-Spline
‡There are at least three different 7.5" GM cases available, shimming may be required between the case and side gear of the spool to eliminate space between blocks
Ford 9" Set Up Carrier ALL14169 Set up carrier takes the place of the gear set on Ford 9" rear end housings and will keep dirt and debris out of the housing. A pinion bracket can be attached to the cover so the J-bar or Panhard bar can be mounted for car transporta- tion. The tip of the handle matches the centerline of the driveshaft U-joint so driveshaft length can be easily measured. Gloss red powder coated finish.
Cross Pins Part No.
ALL68120
Description
ALL68120 ALL68167 ALL68163 ALL68161 ALL68165
Ford 8.8" And 9" (3/4") GM 10-Bolt (7.5" Ring Gear) GM 10-Bolt (8.2" Ring Gear) GM 10-Bolt (8.5" Ring Gear) GM 12-Bolt (8.875" Ring Gear)
67
Made with FlippingBook flipbook maker