REAR ENDS & AXLES
Clamp-On Mini Breathers Breathers are easily mounted to either 1-1/2" or 1-3/4" tubing. Breathers are 1" tall and 1-3/8" in diameter. Great for use on transmissions, differentials, etc. Bottom fitting is 1/4"NPT. Black anodized finish. Part No. Description ALL36106 Breather For 1-1/2" Tubing ALL36107 Breather For 1-3/4" Tubing ALL36103 Replacement Filter Only
Mini Breather Tanks Small capacity, spun aluminum tanks can be used to vent transmission or rear end to prevent lubricant from being forced out. Tanks are com- plete with 1/4"NPT bung at bottom and bracket for mounting to chassis tubing. Part No. Description
ALL36140 Tank For 1-1/2" Tubing ALL36141 Tank For 1-3/4" Tubing Mini Breather ALL36145 Compact breather mounts in a deck or bracket with a 7/16" hole and has a -4AN male end making it ideal for venting transmissions or rear ends.
SAFETY / DRIVER EQUIPMENT
Roll Bar Padding Closed-cell foam does not absorb moisture, but progressively absorbs shock (gets more dense as it is compressed). Offset inside diameter allows easy installation, with thicker padding toward driver. Available in 3 foot lengths. Part No. Description ALL14100 Black ALL14101 Red ALL14102 Blue ALL14103 Orange ALL14104 Yellow ALL14105 Gray ALL14106 Purple SFI Mini Roll Bar Padding ALL14112 Mini roll bar padding is ideal for tight areas in a race car when standard padding is too large.
Door Bar Padding ALL14115 Closed cell padding adds protection from hard sur- faces inside a race car. Cov- er door bars, seat supports, or increase padding in seat for comfort. Sold in 36" x 48" sheets, 3/4" thick. Drag Window Net ALL10289 Drag window net with border style mounting attaches to the diagonal door bar of most drag cars. Net meets SFI 27.1 specification and is appropri- ately tagged. Net has top and bottom built-in sleeves to accept most round tube style window net installation kits including ALL10217 and ALL10219. Funny Car Style Window Net ALL10291 Border style window net has built-in vertical sleeves for installing mounting rods to attach net to the chassis. Net is ideal for cages that have been fitted with or updated to funny car style bars around the driver. Net is SFI 27.1 certified. 24"
24"
18"
Unique, compact design provides driver protection to a specific area. Peel and stick backing for easy installation on 1-1/4" to 1-3/4" tubing. Meets SFI 45.1 specifications. Sold in 3 foot lengths, black only. SFI Roll Bar Padding Provides 180 degree cov- erage where space con- cerns are not a problem. Peel and stick backing for easy installation. Meets SFI 45.1 specifications. Choose from two sizes, each 3 feet long, black only. Part No. Description ALL14110 1-1/8" To 1-1/2" O.D. Tubing ALL14111 1-5/8" To 2" O.D. Tubing
HANNAH YERRINGTON
MATT HAUCH
70
Made with FlippingBook flipbook maker