SUSPENSION
U-Bolt Pads Universal style u-bolt pads fit 3" diameter axle tubes and leaf springs up to 2-1/2" wide
Wheelie Bar Wheels Billet 6061-T6 aluminum wheels are molded with a durable 4" O.D. polyurethane tire that will not dent or give like a
rubber tire. Wheels are available with or without bearings and accept 3/8" mounting hardware. Mounting width: non-bearing wheel is 1.625",
using 1/2" u-bolt fasteners. Center alignment hole is 5/8" to ac- cept most lowering blocks or spring bolts. 1/4" thick formed steel pads have a gusseted shock mount with a welded bung to accept 1/2" mounting hardware. Part No. Description ALL60036 RH Pad ALL60037 LH Pad ALL60038 Dual Mount Pad ALL60036 ALL60038 ALL60037
bearing style wheel is 1.250". Without Bearings (1.625" Wide Mount Part No. Description ALL60510 5-Spoke ALL60512 5-Hole ALL60514 10-Spoke NEW! With Bearings (1.250" Wide Mount) Part No. Description ALL60511 5-Spoke NEW! ALL60513 5-Hole NEW! ALL60515 10-Spoke NEW!
TOOLS & PIT EQUIPMENT
Digital Level ALL10742 Digital level with magnetic base measures the angle of a single straight surface or the angle of a joint between two straight surfaces. Displayed value on the LCD screen rotates to right side up when digital level is in an upside down position. Powered by three 3V CR2032 batteries (included). 2" x 2" x 1". Digital Level ALL10744 Digital level with powerful magnetic base measures the
Tubing Notchers Notchers render precise joints for more consistent welds and stronger cages. Available in deluxe aluminum or economy steel ver- sions, notchers accept up to 2" diameter stock and automati- cally align and center tubing. Use in drill press or with hand drill. Notchers adjust up to 45°. Part No. Description ALL10400 Deluxe Aluminum ALL10411 Economy Steel Replacement Parts Part No. Description ALL10402
ALL10411
ALL10400
angle of a single straight surface or the angle of a joint between
ALL10402 ALL10403
two straight surfaces. Displayed value on the LCD screen rotates to right side up when level is in an upside down position. Pow- ered by three 3V CR2032 batteries (included). 6" x 2.25" x 1.25". Smart Tool ALL10113
5/8"-18 Thread Adapter Arbor Support Bushings (Pair) Arbor With 1/2"-20 Thread
ALL10403 ALL10404
Optional Parts Part No.
Description
Ensure that chassis tubing is level and plumb when building roll cages or checking driveshaft angles. Powered by a standard 9 volt battery. Smart Tool Tray ALL10740
ALL10405 Arbor With 5/8"-18 Thread ALL10406 Drill Press Mount (ALL10411 Only) ALL10407 Arbor Support With Needle Bearings
ALL10406
ALL10407
Note: Tubing notchers include 1/2"-20 arbor thread and 5/8"-18 adapter. Hole saws up to 1-1/8" diameter use 1/2"-20, larger hole saws use 5/8"- 18 thread. Hole Saw Set ALL10412 Use with tubing notchers. Does not include an arbor for a hand drill. Set includes one of each size: 3/4", 1", 1-1/8", 1-1/4", 1-1/2" 1-5/8" and 1-3/4". Individual Hole Saws Part No. Description ALL10413 3/4" ALL10414 1" ALL10415 1-1/8" ALL10416 1-1/4" ALL10417 1-1/2" ALL10418 1-5/8" ALL10419 1-3/4" Note: Hole saws up to 1-1/8" diameter use 1/2"-20 thread, larger hole saws use 5/8"-18 thread.
Aluminum tray is a nice addition when
using Smart Tool on 7/8" and 1" O.D. trailing arms or suspension tubes. Plas- tic clips allow tray to snap to tube when in tight areas. A bubble level helps provide accurate readings.
79
Made with FlippingBook flipbook maker