TOOLS & PIT EQUIPMENT
Plastigage ® Kit ALL96475 Plastigage strings are a
Remote Starter Button ALL76206 Kit is very helpful for valve lash maintenance when the ignition panel can’t be reached. Leads are 60" long and come complete with gator clamps to connect to starter solenoid. Spark Plug Index Shims Stackable shims index spark plugs at 30° intervals up to 360° properly positioning ground strap in cylinder head for increased power and clearance between
simple and accurate way to verify crankshaft, main and rod bearing clearances. Kit includes two green .001" to .003" and one red .002" to .006" (12" long strings) individually packaged inside calibrated sleeves. Detailed instructions are included.
Valve Spring Compressor ALL96490 Adjustable C-clamp style
compressor will fit most heads including Hemi. Spring cup will fit stock springs up to 1.750" diameter and a “working window” to gain access to
spark plug and piston. Shims are intended for use with 14mm flat seat spark plugs only. Package of 24 shims contains (12) silver 60°, (12) black 90°, detailed instruc- tions and dial chart. Part No. Description ALL96505 Spark Plug Index Shims, 14mm Flat Seat ALL96506 Spark Plug Index Shims, 14mm Flat Seat, Small O.D. (All Pro)
keepers that measures 1.100", which is too large for some small diameter spring/retainer combinations. Compressor has 9/16" hex for use with a wrench, ratchet or impact. This tool will handle spring pressures in excess of 1200 lbs. without slip- ping off.
Spark Plug Indexing Tool ALL96510 Indexing
positions the ground strap of the spark plug properly
Feeler Gauges Use in engine assembly to check con- necting rod side clearance, piston ring end gap, spark plug gap and valve lash. Gauges have Metric and SAE sizing designa- tions etched in each blade. Choose straight or angled sets. Part No. Description ALL96420 Straight
for best piston dome clearance and un-shrouds the electrode for a more even burn and possible gains of 5-15 horsepower. Works with flat gasket or taper seat 14mm spark plugs. Includes instructions.
Spark Plug Gap Tool ALL96515 Used to set consistent plug gap. Insert plug into holder, then put feeler gauge between ground strap and electrode. Gently turn knurled knob until feeler gauge is snug. Flywheel Locking Tool SB/BB Chevy ALL96426 Place flywheel locking tool onto rear block dowel pins to prevent the flywheel from turn- ing while tightening or loosening balancer bolts, flywheel bolts, clutch/pressure plate bolts or cam gear bolts. Locking tool works with 153- or 168-tooth flywheels and flexplates.
Valve Lash Wrenches Allstar Valve Lash Wrenches save precious time and eliminate fum- bling with two separate wrenches. Available for Jesel, T&D and other poly-lock style rocker assemblies. Part No.
Description
ALL96400 ALL96401
7/16" Box Wrench, 1/8" Allen Wrench, Jesel Assemblies
1/2" Box Wrench, 3/16" Allen Wrench, T&D Assemblies ALL96402 9/16" Box Wrench, 3/16" And 7/32" Allen Wrenches, Stud Girdle Assemblies ALL96403 5/8" Box Wrench, 3/16" And 7/32" Allen Wrenches, Poly Lock
Remote Starter Switch Kit ALL76205 Kit includes a low profile,
steel cased foot pedal with 8 foot cord and as- sorted wire ends to work with many applications. Provide hands free engine cranking when adjusting valves.
SB Chevy Crank Socket ALL96424 Steel socket for rotating the crankshaft during engine assembly features a 1" hex and a 1/2" ratchet drive.
86
Made with FlippingBook flipbook maker