TRANSMISSION COMPONENTS
Transmission Coolers
Flywheel Locking Tool SB/BB Chevy ALL96426
ALL26700
Universal coolers reduce operating temperature of the fluid, extend life of the transmission and provide better performance. Use as a stand alone cooler or as an auxiliary unit to increase cooling capacity
Place flywheel locking tool onto rear block dowel pins to prevent the flywheel from turning while tightening or loosening balancer bolts, flywheel bolts, clutch/ pressure plate bolts or cam gear bolts. Locking tool works with 153- or 168-tooth flywheels and flexplates.
Balancing Plate ALL26120 Install between crankshaft flange and flexplate to use a Chevy 350 flexplate or flywheel with a 400 crank. Pilot Bushing Install Tool ALL26115
of a stock system. Increased cooling is recommended when using a high stall converter, or if the vehicle is used for towing. Choose from universal coolers with 3/8" barbed fittings, rubber hose, clamps and mounting kit, or -6AN coolers with standard -6AN male fittings and mounting kit. Part No. Overall Size Core Size GVW Coolers With 3/8" Barbed Fittings ALL26700 12" x 5" 9" x 5" 10,000 Lb ALL26702 15" x 5" 12" x 5" 12,000 Lb ALL26704 12" x 7.5" 9" x 7.5" 16,000 Lb ALL26706 15" x 7.5" 12" x 7.5" 18,000 Lb ALL26708 16" x 10" 12" x 10" 20,000 Lb ALL26709 20" x 10" 17" x 10" 26,000 Lb Coolers With -6AN Fittings ALL26711 12" x 5" 9" x 5" 10,000 Lb ALL26712 15" x 5" 12" x 5" 12,000 Lb ALL26714 12" x 7.5" 9" x 7.5" 16,000 Lb ALL26716 15" x 7.5" 12" x 7.5" 18,000 Lb ALL26718 20" x 7.5" 17" x 7.5" 20,000 Lb ALL26719 20" x 10" 17" x 10" 26,000 Lb Locking Transmission Dipsticks Dipsticks feature a positive lock to keep dipstick in place and seal tight to prevent fluid leaks while sealing out moisture and debris. Steel case fill tubes have a gold finish, include a welded-on mounting tab and are fitted with a rubber grommet type seal which reduces the risk of leaks common with traditional O-ring seals. Locking dipstick tubes are required on 10.99 and faster drag cars. Part No. Description Powerglide ALL69100 Chevy Car ALL69102 Chevy Dragster ALL69104 Chevy Altered ALL69107 Dedenbear Car ALL69108 Dedenbear Dragster Turbo-Hydramatic 350 ALL69110 Chevy ALL69111 Buick, Olds, Pontiac Turbo-Hydramatic 400 ALL69112 Chevy ALL69113 Buick, Olds, Pontiac Chevy (Other) ALL69116 Chevy 200-4R ALL69117 Chevy 700R4 ALL69118 Chevy/GMC 4L80-E Chrysler Torqueflite ALL69120 727 Small Block ALL69121 727 Big Block ALL69124 904 Ford ALL69126 Ford C-4 Case Fill ALL69127 Ford C-4 Pan Fill ALL69128 Ford C-6 Small Block ALL69129 Ford C-6 Big Block ALL69130 Ford AOD
Driver simplifies installation of pilot bushings or bearings for manual transmissions including Muncie, Saginaw, BorgWarner, T-10 and many other popular transmissions with .590" pilot shafts. Extended Length Pilot Bushings
Use these extra long bushings when distance between engine and bellhous- ing has increased due to use of mid- plates, rear motor mounts or adapters. Bushings help maintain true alignment of clutch disc to flywheel. Part No. Description ALL26112 Bronze Bushing ALL26114 ‡
ALL26112
ALL26114
Steel Roller Bearing Bushing (has a machined in roller bearing to reduce friction and wear.) ‡ Bearing is shipped dry. Apply a good quality, high-temp grease upon installation. Clutch Alignment Tools Splined, high-impact plastic tools are helpful when aligning the clutch disc on the flywheel for proper insertion of the transmis- sion input shaft. Part No. Description ALL14290 1-1/8" Diameter, 10-Spline ALL14292 1-1/8" Diameter, 26-Spline
TERRY McMILLEN • SCOTT WAHLSTROM
MATT HAUCH
94
Made with FlippingBook flipbook maker