WIRING ACCESSORIES White Wiring Accessories
Klick Lighting - 3 Pin
Klick AX - 4 Pin
Pre-Wired Systems
Klik is a secure lighting and control connection system that provides simultaneous mechanical and electrical connection in one plug. Luminaires can be connected in seconds in absolute safety, without circuit isolation. All live contacts are inaccessible and the earth connection is made before any other.
Klik 6A pre-wired plug in ceiling roses are used to coennect luminaires to a fixed wiring installation. Auxiliary contact available, a typical use is for emergency lighting. Klik 4 pin plugs are used to connect into the klik 4 pin sockets giving a pluggable connection to luminaires.
Klik 3 or 4 pin 6A pre-wired plugs are used to connect luminaires to a klik rose or marshalling box.
Lighting Part No.
AX Part No.
Length
Part No.
Description
Dimensions mm
Part No.
Description
Dimensions mm
Pre-Wired Plug-In Ceiling Roses 6A Ceiling Rose with 0.75mm 2 PVC flexible cord. PCR2000/1.0 CR64AX/1.0 1 Metre PCR2000/2.0 CR64AX/2.0 2 Metre PCR2000/3.0 CR64AX/3.0 3 Metre PCR2000/4.0 CR64AX/4.0 4 Metre Pre-Wired Plugs 6A Ceiling Rose with 0.75mm 2 PVC flexible cord. P22/1.0 P64AX/1.0 1 Metre P22/2.0 P64AX/2.0 2 Metre P22/3.0 P64AX/3.0 3 Metre P22/4.0 P64AX/4.0 4 Metre For Red AA Plugs add ‘ R’ to code e.g. P64AXR/1.0
Plug-In Ceiling Roses 6A PCR2000
Plug-In Ceiling Roses 6A CR64AX
3 Pin Ceiling Rose 75 Dia x 44mm
4-Pin - White 4-Pin - Red
74 Dia x 44mm 74 Dia x 44mm
A1
CR64AX/R
Cover
75 Dia x 44mm
Plugs 6A P22
A1
Cover - White 75 Dia x 44mm
A1/R
3 Pin Plug
57 x 25 x 25mm
Cover - Red
75 Dia x 44mm
Socket Outlets 6A S21
Plugs 6A P64AX P64AXR
Ultra Flush Socket 86 x 36 x 1.5mm
4 Pin Plug - White 57 x 55 x 44mm 4 Pin Plug - Red 57 x 55 x 44mm
S26 S27 S28
Architrave Socket
86x33x6mm 74 Dia x 7mm 86 Dia x 1.5mm
Socket Outlets 6A S64AX
Round Socket
Ultra Flush Round Socket
Round Socket
74 Dia x 7mm
S26
1 Gang Square Socket 86 x 86 x 9mm
Lighting, Connection & Controls Klik marshalling boxes are used in conjunction with Klik 3 and 4 pin plugs to connect luminaires within an area. The Klik marshalling box can be separated into two independently switched circuits. These circuits can be controlled via wall switch or occupancy sensor.
Part No. KLDS4 KLDS6 KLDS8 KLDS10 KLDS12
Description 4 Outlets 6 Outlets 8 Outlets 10 Outlets 12 Outlets
H x W x D mm 73 x 222 x 238mm 73 x 222 x 288mm 73 x 222 x 338mm 73 x 222 x 388mm 73 x 222 x 438mm
Occupancy Sensors
Hager occupancy sensors come complete with integral photocell and the facility for wall switch override. • Can be progammed for presence or absense.
• Factory presets, lux=400, time=20 min, presence detection. • EEK001 programming tool is easy to use with 2 memory settings to enable repeatability.
• Range 7m diameter for large movements, 5m diameter for small movements.
Standard Part No. EEK510B EEK520B EEK005 EEK001 EEK002
Pre-Wired Part No. EEK513W EEK523W
Description
Standard Occupancy Sensor Digital Occupancy Sensor
Surface Mount Kit Programming Tool Remote Control
83
Together we generate value
Made with FlippingBook - Online magazine maker