Calibration Certificate Certificate No. 746737 216303 Mountz Cal ID:
www.mountztorque.com
# AC-1346
Calibration Performed By: MOUNTZ ALABAMA 19051 UNDERWOOD RD. FOLEY, AL 36535 USA (408) 850-9978
Issued To:
19051 UNDERWOOD RD. FOLEY, AL 36535 USA MOUNTZ ALABAMA
Sales Order Number: SO268939
Equipment Tested:
Cal. Date:
12 MONTHS 08-May-2026 08-May-2025
Description:
MOUNTZ FG-20I TORQUE SCREWDRIVER PRESET LIMITING
Cal. Interval:
Arrival Condition: Cal. Due Date:
Serial Number: Model Number:
0232128-3112
MEETS MFG SPEC
FG-20I
F Service Performed: CAL TO MFG SPEC / Temp. / RH%: 70 40
Range:
2 - 20
Unit of Measure: lbf.in
Calibration Result:
1.9% PASS
Accuracy:
6% OF SETTING
Uncertainty: Procedure:
3WI-7.1-001
Calibration Notes:
Measurement Data:
Seq.
Description Preset Reading 1 Preset Reading 2 Preset Reading 3 Preset Reading 4 Preset Reading 5
Nominal
Tolerance -
Tolerance +
As Found As Left
1 2 3 4 5
10.000 10.000 10.000 10.000 10.000
9.400 9.400 9.400 9.400 9.400
10.600 10.600 10.600 10.600 10.600
9.946
9.946
10.322 10.370 10.388 10.333
10.322 10.370 10.388 10.333
Standards Used:
Traceability #
Description
I.D.
Range
Units Accuracy
Cal. Due
MOUNTZ BMX100I TORQUE TRANSDUCER FIXED
193310 10 - 100
lbf.in
0.5%
03-Jun-2025
728853
Work Performed By: R. COUCH TECHNICIAN
Reviewed By: CALIBRATION QC T. HOLLEY
Calibrations are performed using standards traceable through NIST or other National Metrology Institute to the International System of Units (SI). Calibration system complies with ANSI/NCSL Z540-1 and ISO17025. This information applies only to the instrument identified above and may not be reproduced, except in full, without prior written consent. Reported uncertainties are expressed as expanded values at approximately 95% confidence level using coverage factor K=2. There is no implied warranty that instrument will maintain its specified tolerance during the calibration interval. Decision Rule 1 is employed (measurement uncertainty is not taken into account) when making conformity statements unless otherwise specified .
Page 1 of 1
Made with FlippingBook Annual report maker