Router festoolusa.com 147
146
Router
OF 1400 Accessories Guide Stop
OF 1400 Accessories Hole Drilling Set
$66.00 492601
$299.00 583290
Includes LR 32 Guide Plate with mandrel (494 340), two side fences consisting of edge stop (485 758) and sliding stop flag (485 759). Packaged in a box. Guide Rail, clamps, and bits sold separately. Guide Plate Includes centering mandrel (492 187). Guide Rail, clamps, bits, and side fences sold separately. Edge Guide Set Guide Rails a specific distance from edge. Integrated ruler and adjustable stops. For use with the LR 32 system. Includes stop and sliding stop flag (485 759). Guide Rail Index Accurately place shelf pin holes and European hardware based on the 32 mm system using the stop to set the distance from the end. Also used to calibrate LR 32 rails to be joined together for taller workpieces. (2 pieces) Dowel Drill Bit - Brad-Point Brad-point style bit for stopped holes for shelf pins and hardware installation. Dowel Drill Bit - Spear-Point Spear-point bit for through holes for shelf pins or hardware installation. Euro-Hinge Boring Bit 35 mm Flat-bottom cutting bit for recessed cup-style hinges. 20mm Forstner Bit 20 mm Flat-bottom cutting bit for recessed cup-style hinges. Hole Drilling Set LR 32-SYS for OF 900, OF 1000, OF 1010, OF 1010 R, OF 1400 in the FS-LR 32 hole drilling system. Highly efficient production of series of holes with 32 mm spacing.
Adapt routers to Guide Rails for perfectly guided cuts. Slot in base engages rib on Guide Rail. Includes Router Support (438608). Does not include Guide Rods (495247). Edge Guide Quickly and easily rout grooves, flutes, dados, ploughs and rabbets with guided precision. Includes Dust Hood (489565). Chip Catcher Swiveling Chip Catcher deflects chips and dust in edge-forming operations, further enhancing dust extraction efficiency. Base Accessory base for use with small diameter edge-forming bits. Provides stability on outside corners by extending the base to the inside near the bit. Table Widener Oversized, heavy-duty baseplate with integrated rotating chip catcher. Increased hole diameter size for larger edge-forming bits. Increased base width for greater support. Aids starting and finishing cuts with extended base surface.
$155.00 494340
$115.00 492636
$86.00 485758
$31.00 492732
$35.00 496938
$61.00 492574
$39.00 491066
$99.00 493233
$46.00 491064
Collet 1/4” collet with nut 8 mm collet with nut 1/2” collet with nut Template 24 mm OD / 21 mm ID 27 mm OD / 25 mm ID 30 mm OD / 27 mm ID 40 mm OD / 37 mm ID
$99.00 491077
$55.00 494463 $55.00 494460 $58.00 494465 $20.00 492183 $20.00 492184 $20.00 492185 $20.00 492186
$76.00 491072
$595.00 576799
Guide Rails for the LR 32 Hole Drilling System Guide Rail indexed with a series of holes for 32 mm spacing. Hole drilling set sold separately. FS 1400/2 - LR32 Guide Rail Length: 55” (1,400 mm) $165.00 496939
Centering Mandrel Center guide bushings and the LR 32 plate to the collet for accurate routing results. Works with 1/4” and 8 mm collets.
$39.00 492187
$429.00
491622
FS 2424/2 - LR32 Guide Rail Length: 95-13/32” (2,424 mm)
Made with FlippingBook - Online catalogs